Hi all!
I am in the same situation here in Sweden, but I just got the X100 card and don
t get it to work with DTMF caller ID.
Is the only way to solve this to buy a TDM400 card w FXO modules?
Is it just a driver question or a HW issue with the X100 card?
Where to find dok about the new keywords in conf files like
"cidstart=polarity" in zapata.conf?
rgds
Gunnar
>>> traveler@xs4all.nl 2004-09-29 01:02:06 >>>
Hey all,
Following up on my own mail to let you know that I've installed
the FXO-module and got rid of the X100P. After some initial problems
with the hardware-configuration (older TDM400P's don't accept an
FXO-module in the first slot), it all worked, including caller-ID.
Here's the configuration to make incoming CID work on Dutch
analog lines from KPN, using a TDM400P FXO-module:
context=<context>
signalling=fxs_ks
immediate=yes
usecallerid=yes
cidsignalling=dtmf
cidstart = polarity
hidecallerid=no
callerid=asreceived
callwaiting=no
callwaitingcallerid=no
adsi=no
channel => <channel>
Grtz,
Oliver
On Mon, Sep 27, 2004 at 14:44:53 +0200, The Traveller wrote:
> Hey all,
>
> I recently noticed that DTMF caller-ID was implemented in CVS, so
> I requested the service from my telco (the Dutch KPN) and tried to get
> it going in Asterisk (current CVS), without success so far.
>
> This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2
> HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm
> trying to get caller-ID working on is obviously on the X100P.
>
>
> Here's the relevant configuration:
>
> context=<context>
> signalling=fxs_ks
> immediate=yes
> usecallerid=yes
> cidsignalling=dtmf
> cidstart=ring
> hidecallerid=no
> callerid=asreceived
> callwaiting=no
> callwaitingcallerid=no
> group=1
> callgroup=1
> pickupgroup=1
> adsi=no
> channel => 7
>
>
> I've tried "immediate=no", "cidstart=polarity", as
well as waiting for
> 5 secs in the dial-plan before doing anything with the call, but never got
> it to receive the caller-ID from the line. I used ZapBarge on the channel
> and called the line to verify that the caller-ID is actually beeing sent,
> and it's there. Does anyone have an idea what the problem could be or
> have it working? Could it be related to the X100P? I have an FXO-
> module for the TDM-cards, but didn't get around to installing it yet.
> Thanks for you help.
>
>
>
> Grtz,
>
> Oliver
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
