similar to: Questions about TE410P card

Hello my brothers and sisters, Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" and "Asterisk" Package? or i need also to other cards or packages? and if "X100P" card not suitable to VoIP, please recommend a another card, (please take in your account that i would like to connect standard analog line to the card

Hello I'm in Egypt and i would like to provide VoIP Service. what i (as hardware and software )need to provide this service? only Digium telephony card and Asterisk (Configuration Package)? am i need to any other getway , hardware or software? if any 1 have complete solution, please provide me it. thanks in advance Regards Eng. Yousri Farouk Linux System administrator www.egypt.com

Hi to all out there using HP DL380 G4 servers, i found a way to get the Digium TE410P with older firmware running on a HP-Compaq DL380 G4 Server! Here's the step-by-step description: 1. download the latest BIOS (in my case it was 4.04 from date: 06/02/2005) for the HP-Compaq DL380 G4 using the "Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL480 G4 (P51) Servers" Link:

I am having a problem with asterisk not being stable enough for production use. I have two cards, the digium TE406P, and the TE410P. The TE410P is the primary card that I am using but I would like to move to the TE406P for the echo cancellation and more flexibility of PCI slots available. General config info: 3 PRIs, configured as such: span=1,2,0,esf,b8zs span=2,0,0,esf,b8zs

Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector

Max TE410P card on an Asterisk Hello, Does anybody know the max number of TE410P/TE405P card we can put in an asterisk box? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/f220d3ae/attachment.htm

Was there any resolution on this I also have a TE410P in an box with an Intel E7501 chipset? -Vickers -------- Original Message -------- Subject: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server Date: Tue, 8 Feb 2005 11:13:24 +1030 From: Peter Childs <peter.childs@nec.com.au> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040809/8f53bb6a/attachment.htm -------------- next part -------------- ? Hi There, We install asterisk in RH9. We've T1 line and four TE410P card. We wanted to configure this card. We used ztcfg to see the channel configuration. It shows like "Channels 0". How to configure

Hello all, i would like to configure TDM11B with Asterisk, if any one have the configuration steps please provide me it. Thanks in advance -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050208/1f6dfabe/attachment.htm

Hi All This mail is from a new comer to asterisk , just exploring I was going through the digium web site , In need some advice and suggestions , which card I should chose , should I choose TE411P (with on board echo cancellation ) or TE410P If I go for TE411P , I will be spending 1,000 $ more and for me finance part is critical , will I face

Hi all, I'm looking for a new system which will use the TE410P. Originally I was going to use a dual Athlon MP system, but my supplier tells me these are being phased out now, and so will be difficult to find replacement parts later. So, I am looking for suggestions of suitable motherboards with 3.3V PCI slots for the following CPU types (in order of my personal preference) AMD Opteron 1xx

Dear All, Situation (1) is SIP agent -> Asterisk TE410P -> Telcom Mobile System PRI debug Message type: (just hear about Mobile System VoiceMail IVR introduction, hangup before beep tone) Message type: SETUP (5) Message type: CALL PROCEEDING (2) Message type: ALERTING (1) Message type: DISCONNECT (69) Message type: RELEASE (77) Message type: RELEASE COMPLETE (90) GSM Mobile still

TE410P card down. I have three (3) TE410P in one machine running asterisk with SS7. My problems started last week when one of my cards started switching to E1 every time after reboot. I set the following in dahdi.conf and that solve the problem. /etc/modprobe.d/ options wct4xxp t1e1override=0x00 Now all 4 ports on that card is down with Red Alarm. I tried rebooting the machine and

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic", we disabled all the

Hello, I am looking to buy a large number of TE410P cards for a big international project. I have studied the documentation and zaptel.conf and as result I have the following questions: 1. How do you switch the card from ISDN PRI TE to NT? This means from being configured as User Equipment (the PABX) to be Network Equipment (the Exchange). 2. How do you configure the card for E1 or T1? 3. In

hi all, i am trying to get my TE410P (see previous posts) working in Austria (telekom Austria - i am still waiting for an answer for my questions). my /etc/zaptel.conf looks like -------------------------------- span=1,1,0,ccs,hdb3,crc4,yellow span=2,2,0,ccs,hdb3,crc4,yellow bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 loadzone=at defaultzone=at -------------------------------- after

I'm hoping for help on installing a second TE410P card in a system. I'm confused about 2 things. 1. The rotary switch on the first card should be set to 0 and second card 1? 2. When adding the second card to zaptel.conf - is the new card span=5 or span=1: example: span=1,0,0,d4,ami or span=5,0,0,d4,ami TIA Bart

I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff0000, remapped to f8a34000 TE410P version c01a010b, burst ON, slip

Hi list, We have been trying to configure a Quad Span T1 card in a system running RH9. We have followed the instructions in the Wiki and searched the mailing lists, but so far havent got any success. Cable is connected to the first span, and module is loaded. Without loading the module the LED glows in red colour, but the moment we load module, it goes off. (No red or green) . We ran zttool

TE410P - one way audio, after "rpm -qa" on RedHat 9 After much trouble, I can consistently reproduce this error. Anyone have any idea why all Zap channels on my TE410P would develop one way audio after "rpm -qa" has been run while asterisk is running? If I reboot, run "rpm -qa" first then load asterisk and modules all is OK when "rpm -qa" runs the second