Hello my brothers and sisters, Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" and "Asterisk" Package? or i need also to other cards or packages? and if "X100P" card not suitable to VoIP, please recommend a another card, (please take in your account that i would like to connect standard analog line to the card directly). Thanks in advance Eng. Yousri Farouk www.egypt.com
> Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" > and "Asterisk" Package? or i need also to other cards or packages? > and if "X100P" card not suitable to VoIP, please recommend a another card, > (please take in your account that i would like to connect standard analog > line to the card directly).The x100p card was designed to work with the US telephone standards (600 ohm line impedence) and will likely cause echo if used in other countries. I don't have a clue whether Egypt telephone standards are the same as the US; probably not. The TDM04B card (four fxo ports) was designed to work with telephone standards in most countries. You should consider using that card instead and you will find it at www.digium.com web site. Each TDM card can have up to four daughter modules on it, and each module can be either a fxs module (for connecting to standard telephones) or fxo (for connection to telephone lines that come from your telephone company). To order a card with only one line, the part number would be TDM01B. A Linux PC with a TDM card installed and asterisk code will work just fine for small installations. Nothing else required.
Yousri, You may want to look at these two articles which will give you a good idea of what hardware you need for a simple system with one or two phones and phone lines: http://www.onlamp.com/pub/a/onlamp/2003/07/03/asterisk.html http://www.onlamp.com/pub/a/onlamp/2004/01/22/asterisk2.html
Define standard<GRIN>! The X100P was designed for NorthAmerican phone standards and can be used to bring a single dialtone line into asterisk. Lyle ----- Original Message ----- From: "Yousri Farouk" <eng.yousri@egypt.com> To: <Asterisk-Users@lists.digium.com> Cc: "Asterisk Developers Mailing List" <asterisk-dev@lists.digium.com> Sent: Sunday, February 06, 2005 6:56 AM Subject: [Asterisk-Users] Question about X100P card> Hello my brothers and sisters, > > Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" > and "Asterisk" Package? or i need also to other cards or packages? > and if "X100P" card not suitable to VoIP, please recommend a anothercard,> (please take in your account that i would like to connect standard analog > line to the card directly). > > Thanks in advance > Eng. Yousri Farouk > www.egypt.com > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >