similar to: Sipura 2000 w/fax machine oddities

Hi, I am looking at using the softfax that Steve Underwood has developed. It's very straight forward when you assign an extension for the fax. A function that several pbx's has is that they listen for the 'faxtone' for 5 seconds after 'answer' in the menu where you can enter your local extension number, it's normally done in parallel with the DTMF detection. I think

I am looking for a simple way to send occasional faxes via the FXO port on my SPA3102 -- without having to connect a fax modem to an ATA. In an ideal world, this would be some sort of "softfax" that runs on my Linux desktop and talks (via Asterisk) to the SPA3102 with T.38. This is one of those things that I thought would be relatively straightforward, but a couple of hours of Googling

I've heard good things about VoipJet here, so I was going to set up an account. Then I noticed their Terms of Service here: https://www.voipjet.com/tos.php Several things there are very concerning to me, and I'm interested in what other people here think of them. * The ToS specifically forbids use for any call relating to medical, financial, or government matters -- as well as any

Hi all, I'm using VOIPJET to make international calls with an IAX2 connection between my local asterisk server and their server(s). At times I seem to have a problem if 5 or more international calls are made at once - I'm on a 1024kbps download and 256kbps upload DSL line (only the asterisk server uses this DSL line). Today I switched the codec from ulaw to ilbc in an attempt to lower

Hi List, I'm wondering if someone who uses VoipJet as their termination service would do me a favor. If I call the American Airlines reservation number (1-800-433-7300), the call gets connected, but after 30 seconds asterisk drops the call responding that no one answered. I'm using areskicc2 (calling card app) as an authentication system and I don't know if that is what is

Hi all!, i search for some information about to setup my asterisk box with e-mail notification when a I call the voicemail application. Voicemail application works fine in the Dial Plan but nothing happens with email notification ...so what i need to know about this?...wiki pages did not help me ....thanks! G. ----- Original Message ----- From: <asterisk-users-request@lists.digium.com>

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

Hi, I am Chandramouli from India. I have successfully implemented Intercom (Dialling within my office LAN) and Voicemail features using Asterisk. To implement this, I am using X-Lite Softphone. Now, I wish to make calls to US using VoIP Asterisk. I dont think I need any external hardware to implement pure VoIP solution. Here I am sending my configuration file values: Contents of

I am experiencing a very wired problem. Some of my cdr are lost. I use logging cdr to csv, mysql and odbc. But some of them are lost. They miss in csv mysql and odbc, so i'm pretty sure it is related to asterisk functioning. I am running asterisk 1.0.7; this is simple configuration file: extensions.conf [general] static=yes writeprotect=no [macro-gw-voipjet] exten =>

How do I solve the problem with between patterns: _1800 _1NXX I would like all numbers 1800, 1877 etc to go through iaxtel but all other numbers 1xxx via voipjet Example in my extension.conf I have: [iaxtel] exten => _1700NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten => _1888NXXXXXX,1,Dial(IAX2/xxxx:xxxxx@iaxtel.com/${EXTEN}@iaxtel) exten =>

The past two days, I've been having issues with my two VoIP service providers where calls just suddenly hang up. The following is from the log: Mar 14 13:50:55 WARNING[5887] chan_iax2.c: Max retries exceeded to host 64.34.45.100 on IAX2/voipjet-3 (type = 6, subclass = 11, ts=250000, seqno=80) Mar 14 13:50:55 DEBUG[10428] channel.c: Didn't get a frame from channel: IAX2/voipjet-3 Mar

Hello, we have this problem with Trixbox 1.23 I have created an outgoing route where the 1st line has Voipjet and the 2nd an 3rd have voipcheap accounts. The problem is that at certain moments, when we call all the calls go through the voipcheap SIP accounts SIP, whose quality are not only not good enough but also consume a lot of bandwidth. The error message that returns Voipjet to Asterisk is

Is it me... or is it voipjet? This week I've been trying various providers, just can't seem to get voipjet to work. I signed up with voipjet but so far can't get it to work inbound or out bound. I always get 'all circuits busy'. May 12 22:27:05 VERBOSE[2442]: -- Executing [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m",

I'm trying to setup asterisk to accept call from Teliax, request the 10 digit number from user, then dial it thru the VoIPJet. If I'm not wrong I will be charged by both providers because both connection is active during conversation. So my question is can I set the things so that I pay only to VoIPJet? Specific configuration snippets will be greatly appeciated. Thank you.

Hi List, I'm using VoIPJet and NuFone as a fallback, and it seems that both of them are circuit busy! Also it seems that VoIPJet takes forever to return 'circuit busy' while NuFone does it instantly. At any rate, is there like a reliable third VoIP provider I can use for fallback when the two others are busy? Cheers, Jean-Michel.

Hi All, I'm sure this is something simple that I have missed somewhere. When I make a call using BT100 over IAX2 with Voipjet terminating I don't get a ringing sound whilst I'm waiting to be connected. The destination party can answer the call (they do get ringing) and conversation can take place. I don't get this problem with X-Lite softphone? Any help appreciated -

I just changed the from DSL to Shaw Cable (static IP) configure the firewall but now asterisk I can not register with FWD nor VoipJet calls going out. I am using IAX with FWD Did I missed to change a setting? I don't think there is any though. I am on shaw extreme connection; I just talked shaw tech. and they are not blocking any port - I was told. So why IAX will not register with FWD and

Hi, Has anyone experienced intermittent echo issues with voipjet lately?

Dear all, I've noticed some significant voice quality deterioration when calling US landline via VoIPjet.com in the last week or so. Before that the quality was pretty good. Has anyone else experienced any voice quality problems with voipjet recently? Thanks, Roman

Hi, I've got a strange issue, that I haven't found addressed on the wiki. My asterisk box is behind a firewall which routes udp/tcp requests on 5060 and 8000 to asterisk. When I make a call from a Zap or SIP extension on the inside of the firewall to any Zap or SIP extension on the inside of the firewall, everything works find. I have access to voipjet, and when I place a call