Is it me... or is it voipjet? This week I've been trying various providers, just can't seem to get voipjet to work. I signed up with voipjet but so far can't get it to work inbound or out bound. I always get 'all circuits busy'. May 12 22:27:05 VERBOSE[2442]: -- Executing [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 22:27:05 WARNING[2442]: Call rejected by 66.246.220.19: No such context/extension May 12 22:27:05 DEBUG[2442]: Immediately destroying 6, having received reject Outbound settings: notransfer=yes auth=md5 context=from-pstn host= 66.246.220.19 secret= md5hashstring type=friend ; also tried peer and user username=1234 Im using asterisk@home, but that shouldnt matter; people have this working or is it me? JD
International calls must be prefixed as 011 to voipjet. Regards, Sahil Gupta VoiceValley On Thu, 12 May 2005, JD wrote:> Is it me... or is it voipjet? > This week I've been trying various providers, just can't seem to get voipjet > to work. > I signed up with voipjet but so far can't get it to work inbound or out > bound. > I always get 'all circuits busy'. > > May 12 22:27:05 VERBOSE[2442]: -- Executing > [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack > May 12 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 > May 12 22:27:05 WARNING[2442]: Call rejected by 66.246.220.19: No such > context/extension > May 12 22:27:05 DEBUG[2442]: Immediately destroying 6, having received reject > > Outbound settings: > notransfer=yes > auth=md5 > context=from-pstn > host= 66.246.220.19 > secret= md5hashstring > type=friend ; also tried peer and user > username=1234 > > Im using asterisk@home, but that shouldnt matter; people have this working or > is it me? > > JD > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
> Is it me... or is it voipjet? > This week I've been trying various providers, just can't seem to get > voipjet to work. > I signed up with voipjet but so far can't get it to work inbound or out > bound. > I always get 'all circuits busy'. > > May 12 22:27:05 VERBOSE[2442]: -- Executing > [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack > May 12 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 > May 12 22:27:05 WARNING[2442]: Call rejected by 66.246.220.19: No such > context/extensionThe number needs to be 10 digits. Add a 1 in front.
> >>May 12 22:27:05 VERBOSE[2442]: -- Executing > >>[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > >>"[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack > >>May 12 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 > >>May 12 22:27:05 WARNING[2442]: Call rejected by 66.246.220.19: No such > >>context/extension > > > >The number needs to be 10 digits. Add a 1 in front.> Tried that, doesnt seem to matter.Hmm.. did you do an extensions reload? If so, then it should give you a different error. Show us. My iax.conf: [voipjet] type=peer ;host=216.118.117.46 primary east host=69.25.60.30 username=<username> secret=<pass md5> auth=md5 context=default disallow=all allow=ilbc jitterbuffer=yes dropcount=1 extensions.conf: exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwW
--- Kevin Bockman <ml@neoninternet.com> wrote:> > >>May 12 22:27:05 VERBOSE[2442]: -- Executing > > >>[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > > >>"[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack > > >>May 12 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 > > >>May 12 22:27:05 WARNING[2442]: Call rejected by 66.246.220.19: No such > > >>context/extension > > > > > >The number needs to be 10 digits. Add a 1 in front. > > > Tried that, doesnt seem to matter. > > Hmm.. did you do an extensions reload? If so, then it should give you a > different error. Show us. > > My iax.conf: > [voipjet] > type=peer > ;host=216.118.117.46 primary east > host=69.25.60.30 > username=<username> > secret=<pass md5> > auth=md5 > context=default > disallow=all > allow=ilbc > jitterbuffer=yes > dropcount=1 > > extensions.conf: > exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwWshouldn't this be: exten => _1NXXNXXXXXX,1,Dial,IAX2/'user'@voipjet/${EXTEN},,tTwW ? Julius Igugu SouthWork Co. Ltd. __________________________________ Yahoo! Mail Mobile Take Yahoo! Mail with you! Check email on your mobile phone. http://mobile.yahoo.com/learn/mail
I am not an expert yet ;)...but VoipJet is very picky.. in your exten => when I tried with the default it didn't work, when tried as they ask in the FAQ's it worked....you must keep the "exact format with the account number... [Voipjet] exten => _1NXXNXXXXXX,1,SetCallerID(4153574000); Set your CallerID as a ten ;it number like this. See our FAQ exten => _1NXXNXXXXXX,2,Dial,IAX2/1234@voipjet/${EXTEN} ; VoipJet.com NANPA exten => _011.,1,SetCallerID(4153574000); Set your CallerID as a ten digit number like this. See our FAQ. exten => _011.,2,Dial,IAX2/1234@voipjet/${EXTEN} ; VoipJet.com WORLD ;Do not change IAX2/1234 in the above two lines! -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of JD Sent: Friday, May 13, 2005 1:35 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] voipjet anyone? Is it me... or is it voipjet? This week I've been trying various providers, just can't seem to get voipjet to work. I signed up with voipjet but so far can't get it to work inbound or out bound. I always get 'all circuits busy'. May 12 22:27:05 VERBOSE[2442]: -- Executing [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 22:27:05 WARNING[2442]: Call rejected by 66.246.220.19: No such context/extension May 12 22:27:05 DEBUG[2442]: Immediately destroying 6, having received reject Outbound settings: notransfer=yes auth=md5 context=from-pstn host= 66.246.220.19 secret= md5hashstring type=friend ; also tried peer and user username=1234 Im using asterisk@home, but that shouldnt matter; people have this working or is it me? JD _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Personally I thought that VOIPJET has the best service and documentation including simple up to date CDRs also. They do not offer incoming, at least not to me.... If you follow the instructions on their site it will work, if you are useing AAH then maybe you should look into editing the files by had. Checking the server ping time will help. Everyone with a nonroutable IP address will be surprised which ones are faster. On 5/13/05, JD <jd@twingeckos.com> wrote:> Is it me... or is it voipjet? > This week I've been trying various providers, just can't seem to get > voipjet to work. > I signed up with voipjet but so far can't get it to work inbound or out > bound. > I always get 'all circuits busy'. > > May 12 22:27:05 VERBOSE[2442]: -- Executing > [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack > May 12 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 > May 12 22:27:05 WARNING[2442]: Call rejected by 66.246.220.19: No such > context/extension > May 12 22:27:05 DEBUG[2442]: Immediately destroying 6, having received > reject > > Outbound settings: > notransfer=yes > auth=md5 > context=from-pstn > host= 66.246.220.19 > secret= md5hashstring > type=friend ; also tried peer and user > username=1234 > > Im using asterisk@home, but that shouldnt matter; people have this > working or is it me? > > JD > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- <sig> Andrew Latham - AKA: LATHAMA (lay-th-ham-eh) WWW: http://lathama.com Email: lathama@lathama.com - lathama@yahoo.com - lathama@gmail.com If any of the above are down we have bigger problems than my email! </sig>
I use AAH with VoipJet and it works perfectly. Setup was a breeze with absolutely no hand coding of configs required. VoipJet is without a doubt the best outbound provider I have come across. No problems at all yet. <knock on wood> And the call quality has been awesome. Anyone having trouble getting their AAH setup with voipjet may contact me off list for assistance if they want. Cheers, W -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Andrew Latham Sent: Friday, May 13, 2005 5:43 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] voipjet anyone? Personally I thought that VOIPJET has the best service and documentation including simple up to date CDRs also. They do not offer incoming, at least not to me.... If you follow the instructions on their site it will work, if you are useing AAH then maybe you should look into editing the files by had. Checking the server ping time will help. Everyone with a nonroutable IP address will be surprised which ones are faster. On 5/13/05, JD <jd@twingeckos.com> wrote:> Is it me... or is it voipjet? > This week I've been trying various providers, just can't seem to get > voipjet to work. > I signed up with voipjet but so far can't get it to work inbound or > out bound. > I always get 'all circuits busy'. > > May 12 22:27:05 VERBOSE[2442]: -- Executing > [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 > 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 22:27:05 > WARNING[2442]: Call rejected by 66.246.220.19: No such > context/extension May 12 22:27:05 DEBUG[2442]: Immediately destroying > 6, having received reject > > Outbound settings: > notransfer=yes > auth=md5 > context=from-pstn > host= 66.246.220.19 > secret= md5hashstring > type=friend ; also tried peer and user > username=1234 > > Im using asterisk@home, but that shouldnt matter; people have this > working or is it me? > > JD > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- <sig> Andrew Latham - AKA: LATHAMA (lay-th-ham-eh) WWW: http://lathama.com Email: lathama@lathama.com - lathama@yahoo.com - lathama@gmail.com If any of the above are down we have bigger problems than my email! </sig> _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
1.3 cents minute dialing? That is one of the lowest prices out there. Maybe for you in Australia but in North America, it is a very nice deal. W -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Sahil Gupta Sent: Friday, May 13, 2005 5:49 AM To: Andrew Latham; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] voipjet anyone? VoipJet are not too bad, little pricey though.. theres better around.. a matter of looking :-) Regards, Sahil Gupta VoiceValley On Fri, 13 May 2005, Andrew Latham wrote:> Personally I thought that VOIPJET has the best service and > documentation including simple up to date CDRs also. > > They do not offer incoming, at least not to me.... > > If you follow the instructions on their site it will work, if you are > useing AAH then maybe you should look into editing the files by had. > Checking the server ping time will help. Everyone with a nonroutable > IP address will be surprised which ones are faster. > > > > On 5/13/05, JD <jd@twingeckos.com> wrote: >> Is it me... or is it voipjet? >> This week I've been trying various providers, just can't seem to get >> voipjet to work. >> I signed up with voipjet but so far can't get it to work inbound or >> out bound. >> I always get 'all circuits busy'. >> >> May 12 22:27:05 VERBOSE[2442]: -- Executing >> [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", >> "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 >> 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 22:27:05 >> WARNING[2442]: Call rejected by 66.246.220.19: No such >> context/extension May 12 22:27:05 DEBUG[2442]: Immediately destroying>> 6, having received reject >> >> Outbound settings: >> notransfer=yes >> auth=md5 >> context=from-pstn >> host= 66.246.220.19 >> secret= md5hashstring >> type=friend ; also tried peer and user >> username=1234 >> >> Im using asterisk@home, but that shouldnt matter; people have this >> working or is it me? >> >> JD >> >> _______________________________________________ >> Asterisk-Users mailing list >> Asterisk-Users@lists.digium.com >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- > <sig> > Andrew Latham - AKA: LATHAMA (lay-th-ham-eh) > WWW: http://lathama.com > Email: lathama@lathama.com - lathama@yahoo.com - lathama@gmail.com If > any of the above are down we have bigger problems than my email! > </sig> > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Almost positive iLBC is not allowed.... Use uLaw... This is directly form the install instructions... Step 3A (recommended): Set your codec to G.711 ulaw for optimal sound clarity and minimal transmission delay. In iax.conf (found in /etc/asterisk) locate the codec section and include the following only. disallow=all ; Prevent all codecs... allow = ulaw ; ...except G.711 ulaw W -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin Bockman Sent: Thursday, May 12, 2005 10:52 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] voipjet anyone?> >>May 12 22:27:05 VERBOSE[2442]: -- Executing > >>[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > >>"[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 > >>22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 22:27:05> >>WARNING[2442]: Call rejected by 66.246.220.19: No such > >>context/extension > > > >The number needs to be 10 digits. Add a 1 in front.> Tried that, doesnt seem to matter.Hmm.. did you do an extensions reload? If so, then it should give you a different error. Show us. My iax.conf: [voipjet] type=peer ;host=216.118.117.46 primary east host=69.25.60.30 username=<username> secret=<pass md5> auth=md5 context=default disallow=all allow=ilbc jitterbuffer=yes dropcount=1 extensions.conf: exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwW _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Good catch. Did not see the FAQ. Robert, are you the one having problems getting this running in AAH? W -----Original Message----- From: Robert Webb [mailto:asterisk@ropeguru.com] Sent: Thursday, May 12, 2005 11:22 PM To: asterisk-users@lists.digium.com; Wiley Siler Subject: Re: [Asterisk-Users] voipjet anyone? On Fri, 13 May 2005 07:59:09 -0700 "Wiley Siler" <wsiler@education2020.com> wrote:> Almost positive iLBC is not allowed.... Use uLaw... >They do allow for iLBC. From their FAQ page: Codecs. Carriers with primarily business customers should use the G.711 codec when sending VoIP traffic to VoipJet. This ensures that all calls are of the highest sound quality and free from compression degradation. You've paid for VoipJet Tier 1 telco termination and G.711 lets you fully enjoy it. And don't forget some other codecs can add significantly to a call's end-to-end latency, too. If you need to save bandwidth (admittedly very expensive in some parts of the world) then the iLBC codec bundled with Asterisk makes an excellent choice. It's free to use and takes one-fouth the bandwidth of G.711. Another important reason to try iLBC is if there is jitter and packet loss on your network's connection to us, because G.711 really needs ideal conditions to work well. Finally, GSM potentially uses even less bandwidth and CPU processing power than iLBC.
You are completely correct. I see by the called number that the user is in Phoenix? I am too. Call me at 4804230118 ext. 1003 if you want some off list assistance with this. I have mine running just fine with AAH 0.09. Thanks, Wiley -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Rich Adamson Sent: Friday, May 13, 2005 9:24 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] voipjet anyone? Look a little closer... WARNING[2442]: Call rejected by 66.246.220.19: No such context/extension that certainly does not imply an incorrect codec! ------------------------> Almost positive iLBC is not allowed.... Use uLaw... > > This is directly form the install instructions... > > Step 3A (recommended): Set your codec to G.711 ulaw for optimal sound > clarity and minimal transmission delay. In iax.conf (found in > /etc/asterisk) locate the codec section and include the followingonly.> > disallow=all ; Prevent all codecs... > allow = ulaw ; ...except G.711 ulaw > > > W > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin > Bockman > Sent: Thursday, May 12, 2005 10:52 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] voipjet anyone? > > > >>May 12 22:27:05 VERBOSE[2442]: -- Executing > > >>[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > > >>"[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 > > >>22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 > > >>22:27:05 > > > >>WARNING[2442]: Call rejected by 66.246.220.19: No such > > >>context/extension > > > > > >The number needs to be 10 digits. Add a 1 in front. > > > Tried that, doesnt seem to matter. > > Hmm.. did you do an extensions reload? If so, then it should give you> a different error. Show us. > > My iax.conf: > [voipjet] > type=peer > ;host=216.118.117.46 primary east > host=69.25.60.30 > username=<username> > secret=<pass md5> > auth=md5 > context=default > disallow=all > allow=ilbc > jitterbuffer=yes > dropcount=1 > > extensions.conf: > exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwW > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Look a little closer... WARNING[2442]: Call rejected by 66.246.220.19: No such context/extension that certainly does not imply an incorrect codec! ------------------------> Almost positive iLBC is not allowed.... Use uLaw... > > This is directly form the install instructions... > > Step 3A (recommended): Set your codec to G.711 ulaw for optimal sound > clarity and minimal transmission delay. In iax.conf (found in > /etc/asterisk) locate the codec section and include the following only. > > disallow=all ; Prevent all codecs... > allow = ulaw ; ...except G.711 ulaw > > > W > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin > Bockman > Sent: Thursday, May 12, 2005 10:52 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] voipjet anyone? > > > >>May 12 22:27:05 VERBOSE[2442]: -- Executing > > >>[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > > >>"[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 > > >>22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 22:27:05 > > > >>WARNING[2442]: Call rejected by 66.246.220.19: No such > > >>context/extension > > > > > >The number needs to be 10 digits. Add a 1 in front. > > > Tried that, doesnt seem to matter. > > Hmm.. did you do an extensions reload? If so, then it should give you a > different error. Show us. > > My iax.conf: > [voipjet] > type=peer > ;host=216.118.117.46 primary east > host=69.25.60.30 > username=<username> > secret=<pass md5> > auth=md5 > context=default > disallow=all > allow=ilbc > jitterbuffer=yes > dropcount=1 > > extensions.conf: > exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwW > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >---------------End of Original Message-----------------
I had the same problem, there were a couple problems, mostly with my dialplan: AAH 1.0 Config Trunk Settings Trunk Name: voipjet Outbound Caller ID: "Tech Data Pros" <9495027819> Maximum Channels: 4 Dial Rules: 1949+NXXXXXX ; you need to add local area code Outgoing Settings: Trunkname: voipjet PEER Details: allow= ulaw auth=md5 context=to-voipjet disallow=all host=69.25.60.30 notransfer=yes secret= mysecret type=peer username=myuserid Outbound Routing Settings Route Name: FWDOUT Dial Patterns: 393|. Note: for toll free add the following (You will need to dial * before the toll free number: *1800NXXXXXX *1888NXXXXXX *1877NXXXXXX *1866NXXXXXX Trunk Sequence: 0 IAX2/fwd Save all your settings, click on red bar to apply, wait 5-10 seconds depending on the speed of your machine. Dial 393612 for current time and 393613 for an echo test. Kerry Garrison http://geekgazette.com - http://techdatapros.com IT/VoIP Consultants -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Wiley Siler Sent: Friday, May 13, 2005 8:49 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] voipjet anyone? You are completely correct. I see by the called number that the user is in Phoenix? I am too. Call me at 4804230118 ext. 1003 if you want some off list assistance with this. I have mine running just fine with AAH 0.09. Thanks, Wiley -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Rich Adamson Sent: Friday, May 13, 2005 9:24 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] voipjet anyone? Look a little closer... WARNING[2442]: Call rejected by 66.246.220.19: No such context/extension that certainly does not imply an incorrect codec! ------------------------> Almost positive iLBC is not allowed.... Use uLaw... > > This is directly form the install instructions... > > Step 3A (recommended): Set your codec to G.711 ulaw for optimal sound > clarity and minimal transmission delay. In iax.conf (found in > /etc/asterisk) locate the codec section and include the followingonly.> > disallow=all ; Prevent all codecs... > allow = ulaw ; ...except G.711 ulaw > > > W > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin > Bockman > Sent: Thursday, May 12, 2005 10:52 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] voipjet anyone? > > > >>May 12 22:27:05 VERBOSE[2442]: -- Executing > > >>[1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > > >>"[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 > > >>22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 > > >>22:27:05 > > > >>WARNING[2442]: Call rejected by 66.246.220.19: No such > > >>context/extension > > > > > >The number needs to be 10 digits. Add a 1 in front. > > > Tried that, doesnt seem to matter. > > Hmm.. did you do an extensions reload? If so, then it should give you> a different error. Show us. > > My iax.conf: > [voipjet] > type=peer > ;host=216.118.117.46 primary east > host=69.25.60.30 > username=<username> > secret=<pass md5> > auth=md5 > context=default > disallow=all > allow=ilbc > jitterbuffer=yes > dropcount=1 > > extensions.conf: > exten => _1NXXNXXXXXX,1,Dial,IAX2/voipjet/${EXTEN},,tTwW > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Wel, that is the real issue. There is no secret method. You literally just add it to the trunks then set it in your outbound routing being careful to make sure you have dial patterns set that match correctly. So.... Here is the trunk definition.... ------------------------------------------------------------------------ - Make sure your trunk name is "voipjet" with no quotes Enter this in your peer settings.... auth=md5 context=default host=69.25.60.30 notransfer=yes secret=<your secret hash here> type=peer username=<your username here> Nothing required for incoming settings or registration. Nothing required for dial rules or prefix. Change the host if you are not on west coast... ------------------------------------------------------------------------ - Now go to the Outbound Routes page. ------------------------------------------------------------------------ - Create a route for your VoipJet Account (ToVoipJet or something like that is a good name) Set a dial pattern. I use this for LD and international... 011. 1NXXNXXXXXX Add your trunk to the Trunk Sequence (you have to select it and apply it) and then submit.... ------------------------------------------------------------------------ - Now, all that being said, the most common problem (other than something on their side) is going to be if the user malforms their settings. Don't set your trunk name to 1234 (your username) for example. Set it to "voipjet". Make sure the context is correctly defined exactly like above. It is "default". Let me know if that does not work for you. It works perfect for me.... W -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Ariel Batista Sent: Friday, May 13, 2005 8:50 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] voipjet anyone? It would be nice if you post how you set this up to either the wiki or right here. Just a few lines would do nicely. There seems to be allot of people who use voipjet and aah and both are good products. Thanks -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Wiley Siler Sent: Friday, May 13, 2005 10:48 AM To: Andrew Latham; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] voipjet anyone? I use AAH with VoipJet and it works perfectly. Setup was a breeze with absolutely no hand coding of configs required. VoipJet is without a doubt the best outbound provider I have come across. No problems at all yet. <knock on wood> And the call quality has been awesome. Anyone having trouble getting their AAH setup with voipjet may contact me off list for assistance if they want. Cheers, W -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Andrew Latham Sent: Friday, May 13, 2005 5:43 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] voipjet anyone? Personally I thought that VOIPJET has the best service and documentation including simple up to date CDRs also. They do not offer incoming, at least not to me.... If you follow the instructions on their site it will work, if you are useing AAH then maybe you should look into editing the files by had. Checking the server ping time will help. Everyone with a nonroutable IP address will be surprised which ones are faster. On 5/13/05, JD <jd@twingeckos.com> wrote:> Is it me... or is it voipjet? > This week I've been trying various providers, just can't seem to get > voipjet to work. > I signed up with voipjet but so far can't get it to work inbound or > out bound. > I always get 'all circuits busy'. > > May 12 22:27:05 VERBOSE[2442]: -- Executing > [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m", > "[1;35;40mIAX2/voipjet/4803442640[0;37;40m") in new stack May 12 > 22:27:05 VERBOSE[2442]: -- Called voipjet/4803442640 May 12 22:27:05 > WARNING[2442]: Call rejected by 66.246.220.19: No such > context/extension May 12 22:27:05 DEBUG[2442]: Immediately destroying > 6, having received reject > > Outbound settings: > notransfer=yes > auth=md5 > context=from-pstn > host= 66.246.220.19 > secret= md5hashstring > type=friend ; also tried peer and user > username=1234 > > Im using asterisk@home, but that shouldnt matter; people have this > working or is it me? > > JD > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- <sig> Andrew Latham - AKA: LATHAMA (lay-th-ham-eh) WWW: http://lathama.com Email: lathama@lathama.com - lathama@yahoo.com - lathama@gmail.com If any of the above are down we have bigger problems than my email! </sig> _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users