similar to: VoIP extn number planning

Using a spa3000 with asterisk cvs head, and the spa3k is config'ed with a dialplan that essentially routes any call starting with an "8" to asterisk. All other US 7 and 10 digit calls, 911, etc, route via the spa3k's fxo port. Is there a way in extensions.conf to: - inspect the dialed exten number, - if first digit is "8", drop the 8, - continue through each

As I migrate away from Windows, I need to move the data out of my old rolodex program (written in Pascal back in the late 80's) into something that runs on Linux. The data is stored in csv lines in a text file. That old custom program output the data to rolodex cards on a pin-feed dot matrix printer. (Yea...I'm dating myself). Anyway, does anyone know of a decent rolodex program on

Hello I have created an iax exten in my iax.conf file: [300] type=friend username=300 secret=*** context=default host=dynamic callerid="some name" <300> auth=md5 Then in my extensions.conf I have: exten => 300,1,Dial(IAX/${EXTEN},20) exten => 300,2,Hangup I can dial from iaxComm (a soft IAX client) and that works fine. But when I try to dial 300 get: WARNING[22077]:

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

Hello Everybody, I have a genuine problem in Asterisk setup. I have three inbound trunks in my asterisk box, everything is working fine but the only problem is when any user make an out- going call through his/her extension it goes with same number labeled on this. Can we set each of these lines to have fixed outgoing numbers like if extn: 201 make an outgoing call the recipient should

Please forgive me if this is a silly question. I've been following this thread in the hope that I could put my * server and snom 200 into full-time service very soon. I need to find out how to have the lines configured so that it does not return a busy reply when only one call instances is engaged. Am I supposed to create multiple extensions on my asterisk dialplan to reflect the 5 call

Will VoIP be Next? Telco's that provide Internet services to their customers are now trying to charge select companies for large volumes of content that pass over their network to their paying customers! What part of this "greed fest' makes any sense to you? Telco's sell DSL telling customers how much faster it is, how much they can do with Highspeed Internet connections and now

I've looked around briefly for what options are available for encrypting the media stream using asterisk. I did not see any SRTP support, and it looks like there is some initial work on iax2 encryption, but whether it works is still open for question I guess. I'm also curious of other solutions that could be bolted onto the front end of asterisk to provide encryption, and are there

Hi all: Newbies (and others!) may find useful the R Reference Card made available by Tom Short and Rpad at http://www.rpad.org/Rpad/Rpad-refcard.pdf or through the "Contributed" link on CRAN (where some other reference cards are also linked). It categorizes and organizes a bunch of R's basic, most used functions so that they can be easily found. For example, paste() is

Hello! We are located in the UK, and we are planning to replace our old pbx with an asterisk based pbx. For outgoing calls our present pbx is connected to three PSTN lines which all have the same number. Internally, the pbx caters for quite a few extensions, and each extension can make outbound phone calls. Our telecom provider (your communications) gives us monthly itemized bills that list

I''m trying to setup some mildly complex associations for a project we''re working on and can''t seem to find much documentation on n-way has_many :through associations. I have the following models: Person, PhysicalAddress, EmailAddress, PhoneNumber. Each person can have multiple PhysicalAddresses, EmailAddresses, and PhoneNumbers, and multiple people can share the same

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I'm looking for a network management software. And as the network grows it clearly becomes that manual notes is getting too tedious. Also an integrated troube ticketing systemm would be great. Any reference is really appreciated. Thanks. - -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 13:10:54

Dear Lists, Here are my latest posts on retrenching and locating facilities better. Do you have anything in academic papers that use data mining- analytics for 1) Better Employee ROI quantitative measurement or cutting costs rationally based on data rather across the board. 2) Locating facilities based on pure quant based approaches than local supply demand conditions. Specific application for

This is the rsync version I am using. rsync version 2.5.5 protocol version 26 Copyright (C) 1996-2002 by Andrew Tridgell and others <http://rsync.samba.org/> Capabilities: 64-bit files, socketpairs, hard links, symlinks, batchfiles, IPv6, 64-bit system inums, 64-bit internal inums I have a file with a looooong name which I rsync from PC1 to PC2. (redhat-9) I am getting the

I'm wondering if anyone else is running into this problem. When I do a Debug build and attempt to run a tool (opt, llvm-dis, whatever) in gdb, the program takes a LOOOOONG time to begin executing. Loading the executable into gdb is not the problem. I type "run" and the debugger sits there for many seconds and then things start going. gdb emits no messages indicating what it is

Are there any Snom 200 users that have two extns defined on their phone? I've been trying to get two (or more) extns defined in such a way that when extn #1 rings, LED #1 flashs; extn #2 rings, LED #2 flashes, etc. (Answer greating will be different depending upon which extension is called.) I can get multiple extns to register and work with * just fine, but regardless of which extn is

Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router using MGCP IP protocol, instead of controlling it through an E1. Have anyone tried this configuration? How does MGCP works? I've tried to search for it on Google, but I only find the protocol specification for it. Is Asterisk fully capable of this? I can't find any documentatin covering the use of MGCP in Asterisk.

When a call is placed out the Zap interface there is a long pause followed by an error message from the telco that the call can not be placed as dialed. We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a working local number, all dialed numbers get the same error. What should we be looking for ? Best regards, Duane Pudenz Network Infrastructure Manager Shasta

Hi all: Happy summer solstice to all northern hemispherics (and winter solstice to the southerners). Newbies (and others!) may find useful the R Reference Card made available by Tom Short and Rpad at http://www.rpad.org/Rpad/Rpad-refcard.pdf or through the "Contributed" link on CRAN (where some other reference cards are also linked). It categorizes and organizes a bunch of R's

Hello. I would like to know if somebody did a wireles voip with Asterisk PBX. I think to deploy a wireless for about 500 potential customers, it's a 3 km radius maximum coverage with houses without phone lines, I work for public places telephony small enterprises ( a common bussines in Spain) so I can get good rates from 4 telcos and do LCR at my asterisk PBX. Is anybody did this before