similar to: Hardware issues

What server hardware would you recommend for an Asterisk system which are really critical? The additional hardware will probably be two digium TE110P cards, and an Adit 600 platform. If it's possible to run on -48VDC, It would be great! Are there any experiences with any HP or FujitsuSiemens systems? Or other "complete server" systems? Thanks! BR Daniel Nystr?m

Hi again folks! ;) As before, I will transform one E1 30 Channel PRI into 30 FXS channels using Adit 600. Now I'm into choosing server platform. And the two opponents are: * Dell PowerEdge 750 w/ SCSI RAID (or even SATA RAID1) * FujistuSiemens PRIMERGY RX100 S2 (SATA RAID1) As I've seen people having problem with HP server, I havn't looked at it at all. What experience do you

Hi all, I have this project that requires me to use 8 PSTN lines and possible more. I was thinking 2 TDM cards with FXO modules. The I got to read the "Qs about FXO/FXS cards" thread and that scared me. Can anybody recommend anything that is known to work ok with no mysterious problems? I was thinking OpenSwitch12 cards. What do you guys think? Any help is appreciated. Regards, Hadi

Greetings all, I'm new to asterisk... Finally got two IP phones and two TDM400P's (one with four FXO modules and one with four FXS modules)... Began experimenting a couple days ago and have ran into a very aggrevating problem. My system consists of the following hardware: Abit BL7-RAID motherboard Pentium 4 1.6GHz processor 512MB SDRAM 2 TDM400P cards 2 3Com 3c905

1. D/120JCT-LS card with 12 ports. This ports are FXS ports? 2. It is true that "Dialogic drivers cost of $15 per channel" ? 3. Can I use this hardware with asterisk (for E1-ISDN using Wildcard E400P <http://www.digium.com/index.php?menu=wildcard_e400p>) ? 4. Anyone with experiance can tell me how they work and can provide a configuration example? (2 DSP Motorola procesors - I

Hello all, I've posted on this problem before. Well here goes again. I have an intel mobo with a p4 2.4ghz proc, 1GB Ram. It has built-in ethernet and vga and 6 pci slots. I dreamed of making this my household communications server: internet router, firewall, vpn and asterisk. Everything works except the TDM fxs card. Well it works for a little while and it dies: no dialtone, no

I have a small system based on one TDM400 card with - 2 FXO modules for incoming lines - 1 FXS module for one phone The system was working fine in the past. The motherboard was exchanged and during the switch, the phones line was rewired with a mistake and a incoming phone line was connected to the FXS module, and there was ringing voltage on the module. Now, the system kinda works but the FXS

+1 spending money to get that many fxs ports is going to negate any savings of reusing analog phones instead of buying ip phones 1000 analog ports sounds like hell and if it was me I would be embarrassed to have a setup like that tied to my name if I was a consultant etc. Someone will come in after you and ask who set it up and the customer will say you :) On Feb 17, 2016 4:23 AM, "A J

Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router using MGCP IP protocol, instead of controlling it through an E1. Have anyone tried this configuration? How does MGCP works? I've tried to search for it on Google, but I only find the protocol specification for it. Is Asterisk fully capable of this? I can't find any documentatin covering the use of MGCP in Asterisk.

I have a need for an ATA that will register over wifi. *NOT* a DECT phone or other cordless type phone plugged into a wired ATA. Not seeing one right off, and following the recent discussions about compact fanless systems, I thought a custom build-your-own might not only be useful for my purpose, but may be a viable product in its own right. So I started looking for mini-PCI based FXS cards.

I need a recommendation on a good motherboard/processor combination. I would like a motherboard that has lots of PCI slots and works well with Asterisk without problems getting drivers working, etc. Onboard LAN would be nice to keep from using a slot. Plan to use RedHat 8 for the OS. Please provide your input as soon as possible. I need to build a demo box with 2 ports FXO and use the new

Hello all, Recently I bought a TDM02B digium card to conect to the PSTN. We pluged it on a Pentium IV 2,8 Ghz, Asus Motherboard, but when we try to start asterisk, the box hangs. Someone have the same card running with asterisk in a similar machine? Could you tell me your box hardware details? Thanks for your time, Ismael Gil.

Hello folks, I'm very interested in the Digium/Asterisk combination but need some clarification. I would like to setup a SOHO for business and home use. Scenario One: I have one analog line, 4 analog telephones. Do I need a TDM400P + 4 FXS modules (Green) + X100P? Scenario Two: 2 analog lines, 1 selective ring number for fax, 8 analog phones. Is this what I need? 2 TDM400Ps and 8 FXS

I've finally got my Adit 600 and are configuring it right now. But I have to say, there aren't much documentation for it. I've setup MGCP and Asterisk seems to find it. But all channels (40 FXS channels) are "Down"! But the MGCP itself is "Up" according to the statistics. I can't find any documents how to set each channel to "Up" in the CLI. Any

Hello all. My company currently has an older Executone PBX system that we are outgrowing. Rather than wait until the last minute to make a hasty decision, I thought it would be a good idea to do some research and compare options first. My expertise is in computers and networking, and telephony systems are mostly foreign to me. What we currently have are 5 incoming POTS lines and 25

Hello all, please, can anyone advertise me some channel banks, which can operate with E1 (30 FXS)? Rack-mountable option is welcome. I've tried to google, but I've not found nothing appropriate. More than one E1 link is welcome too. Everyone channel banks, which I've found, was between T1 and FXS(O), but I have Digium E1 card and I want use for one line 30 channels and not only 24.

Hi: I had an fxo card from Digitnetworks and it was working fine on my Asterisk box. I then replaced it with TDM04B. I changed the zaptel and zapata to include the four channels. When I run ztcfg, I get configuration errors: Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04:

Hello All, I'm looking to get some feedback on which solution of providing FXS is going to have the best results with faxing. I'm only looking to see what method is going to provide the best digitization into Asterisk, not for transmission from Asterisk to else where. Any recommendations of specific channel banks are welcome. I will need to provide approximatly 216 FXS Ports and need

On Wed, Feb 17, 2016 at 8:14 AM, Mitul Limbani <mitul at enterux.in> wrote: > Sangoma 50 port FXS Thanks. Will I now stack 20 boxes in order to achieve the 1000 FXS lines? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160217/0d4c2800/attachment.html>

I get seg. fault with my * box. at the crash time i had about 35 Bridged Channel. i have: - dual xeon box (3.2Ghz) - 2Gb of memory - E7501 chipset motherboard. - U320 scsi disks - intel Gb ethernet device. - i only use sip for clients (no fxs in box) - TE405P for fxo (with 4 atran TA750). - ulaw is used as codec and echo cancellationo is enabled. but the core dump file has nothing to show with