Hi: I had an fxo card from Digitnetworks and it was working fine on my Asterisk box. I then replaced it with TDM04B. I changed the zaptel and zapata to include the four channels. When I run ztcfg, I get configuration errors: Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) Any suggestions beside the power plug I should try? Thanks ____________________________________________________ Sell on Yahoo! Auctions ? no fees. Bid on great items. http://auctions.yahoo.com/
Chawki - If you don't find help on the listserv, you can purchase 1 (60) minute Tech Support package from us for $79.95 and one of our in-house engineers will assist you. Does not matter that you purchased your Digium board from another reseller. (60) Minute Engineering Support Package http://www.voipsupply.com/product_info.php?manufacturers_id=22&products_id=220 Cory Andrews Purchasing / EVP VOIPSupply.com v ? 716.630.1555 X22 e ? Cory@VOIPSupply.com chawki hammoud wrote:>Hi: > >I had an fxo card from Digitnetworks and it was >working fine on my Asterisk box. I then replaced it >with TDM04B. I changed the zaptel and zapata to >include the four channels. When I run ztcfg, I get >configuration errors: > > >Channel map: > >Channel 01: FXS Kewlstart (Default) (Slaves: 01) >Channel 02: FXS Kewlstart (Default) (Slaves: 02) >Channel 03: FXS Kewlstart (Default) (Slaves: 03) >Channel 04: FXS Kewlstart (Default) (Slaves: 04) > >4 channels configured. > >ZT_CHANCONFIG failed on channel 1: No such device or >address (6) > >Any suggestions beside the power plug I should try? > >Thanks > > > > > >____________________________________________________ >Sell on Yahoo! Auctions ? no fees. Bid on great items. >http://auctions.yahoo.com/ >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > >
I ha the same problem, could be irq issue if you have zaptel.conf and zapata.conf configured properly. modprobe ??? had been loaded? check dmesg check irq's cat /proc/interrupts lspci -vv look for the card information JR> Hi: > > I had an fxo card from Digitnetworks and it was > working fine on my Asterisk box. I then replaced it > with TDM04B. I changed the zaptel and zapata to > include the four channels. When I run ztcfg, I get > configuration errors: > > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > Channel 03: FXS Kewlstart (Default) (Slaves: 03) > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > 4 channels configured. > > ZT_CHANCONFIG failed on channel 1: No such device or > address (6) > > Any suggestions beside the power plug I should try? > > Thanks > > > > > > ____________________________________________________ > Sell on Yahoo! Auctions ? no fees. Bid on great items. > http://auctions.yahoo.com/ > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Is it a revision I board? ----- Original Message ----- From: "chawki hammoud" <cyhammoud@yahoo.com> To: <Asterisk-Users@lists.digium.com> Sent: Tuesday, July 12, 2005 9:44 AM Subject: [Asterisk-Users] Help Configuring TDM04B Hi: I had an fxo card from Digitnetworks and it was working fine on my Asterisk box. I then replaced it with TDM04B. I changed the zaptel and zapata to include the four channels. When I run ztcfg, I get configuration errors: Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address (6) Any suggestions beside the power plug I should try? Thanks ____________________________________________________ Sell on Yahoo! Auctions - no fees. Bid on great items. http://auctions.yahoo.com/ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users