I get seg. fault with my * box. at the crash time i had about 35 Bridged Channel. i have: - dual xeon box (3.2Ghz) - 2Gb of memory - E7501 chipset motherboard. - U320 scsi disks - intel Gb ethernet device. - i only use sip for clients (no fxs in box) - TE405P for fxo (with 4 atran TA750). - ulaw is used as codec and echo cancellationo is enabled. but the core dump file has nothing to show with "gdb". this is the output of gdb: Program terminated with signal 11, Segmentation fault. #0 0xb7fbbce4 in ?? ()
Hi,> -----Original Message----- > I get seg. fault with my * box. at the crash time i had about 35 > Bridged Channel. > i have: > - dual xeon box (3.2Ghz) > - 2Gb of memory > - E7501 chipset motherboard. > - U320 scsi disks > - intel Gb ethernet device. > - i only use sip for clients (no fxs in box) > - TE405P for fxo (with 4 atran TA750). > - ulaw is used as codec and echo cancellationo is enabled. > > but the core dump file has nothing to show with "gdb". > > this is the output of gdb: > > Program terminated with signal 11, Segmentation fault. > #0 0xb7fbbce4 in ?? ()Hmm without knowing anything else about your specific situation: A signal 11 most often is caused by a hardware malfunction, for instance a rotten bit in your memory or something.Any chance you could do some heavy diagnostics on that machine ? http://www.bitwizard.nl/sig11/ Best regards, Florian
asterisk-users-bounces@lists.digium.com wrote:> - dual xeon box (3.2Ghz) > - 2Gb of memory > - E7501 chipset motherboard. > - U320 scsi disks > - intel Gb ethernet device. > - i only use sip for clients (no fxs in box) > - TE405P for fxo (with 4 atran TA750). > - ulaw is used as codec and echo cancellationo is enabled. > > but the core dump file has nothing to show with "gdb". > > this is the output of gdb: > > Program terminated with signal 11, Segmentation fault. #0 > 0xb7fbbce4 in ?? () _______________________________________________What Linux (assuming you're running Linux) distribution are you running? I have seen lots of this kind of problems before. We had lots of stability problems with GNUgk on Debian Woody. Once we moved to Sarge we had no problems at all, with uptime going from a couple of days to several months when we had no need for GNUgk anymore. -- Andreas Sikkema Rits tele.com Van Vollenhovenstraat 3 3016 BE Rotterdam t: +31 (0)10 2245544 f: +31 (0)10 2245540