similar to: Dlink DPH-80 DONT work with asterisk

I'm still a learning but I purchased a dph-140s to test with AAH 1.5. I think this is a rebadged ACT P104SLD which others seem to have working with *. It seems to be configured and registered similarly to the softphones I've been using just fine, but it does not receive or send audio (it will send audio to vm), or perform the loopback test. It seems to signal and receive calls fine. The

List, The D'Link phones are not reliable at this time. I am trying to get them fix their Firmware to my specifications. It is half done so far. However there are still hurdles. below email is self explanatory. At present if you want to use these phones, you need to buy D'Link's SIP Server and run this as one of your SIP servers in the blend to call to Asterisk. Seshu Kanuri "G

Hi, list! I'm playing on an Asterisk@home installation, since a month or two. I've had no trouble setting it up 'n running. I've bought a couple of DLINK's DPH-140S SIP Phones, to use with Asterisk. >From this phones, I can make & receive calls with no trouble, but, when I try to use some "interactive" function (eg Directory or Voicemail), the phone seems

Hello gentlemen, I am new here. I have a D-Link DPH-80S SIP phone (it's a non-US model), and I am trying to make it work with Asterisk. I tried versions 1.0.7 and yesterday's CVS and the behavior is the same. The phone registers with no problem, and can accept calls. But when I try to make outgoing call, there is a series of invite requests from the phone, to which asterisk responds

Hello Situation: I'm moving from a windows XP box to fedora 11. I used winXP to run skype with a dlink dph-50u USB adaptor so that I could talk on skype with my regular phone. Been working fine for months I'm now on fedora 11, able to run skype linux without problem, even the webcam work! Problem, cannot make the dlink dph-50u to work. After a lot of googling, cannot find anything. I

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

hi all after setting up chan_h323, I don't get any ring indications on my Dlink DPH-100H phone. Any idea how to debug this? roy

Hi, I'm playing around with Asterisk and DPH-100M (Dlink mgcp phone) on my debian box. I've got stable version of Asterisk (packaged for debian) working with dlink phone and 7910 from cisco (minimalistic extensions.conf and chan_skinny for 7910) Everything works fine. Now I'm trying to get CVS HEAD working with MGCP. I want to test chan_sccp

hi seems like things are closing in to something that might look like success. I have one problem left: I don't get ring indicator when I dial out from the h.323 phone... Sound is good, so it doesn't look like a codec problem. I'm using chan_capi with early B3. I also use gnugp to route the calls from the phones to asterisk, as the dlink dph-100h requires this. Debug output follows:

Does anyone have any experience ith configureing the sangoma A102 card for testing using a e1 cross cable i've configured and installed the cards properly even the lights on the card are green which proves that my cross cable is properly built too. my problem is with asterisk which gives me these errors PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got event: HDLC Bad FCS

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

Does anyone know if the E1 cards that digium sells work in India. Also are there any distributers for those cards in India. By E1 cards I mean E100P, TE410P or TE405P -- regards Vikram (http://www.vicramresearch.com)

Hello :-) all ssh Version we are use have the same Problem: when we start a deamon process, the windows hang on exit. OS Solaris 6 and 8 Solaris 9 and 10 come with a SUN emplentation of your openssh, the shell dosent hang on exit.... The Workarounds in the Web dosent fix the Problem... Frank -- kind regards / Mit freundlichen Gr??en Frank Beckmann Infrastructure Service Management

Why is SER considered a better SIPserver than asterisk , why is it that SER can handle more clients than asterisk can. And if this is just cause of say poor SIP handling code in asterisk then is there anything being done to fix it. Just wanted to know why SER claims to be better than asterisk as a SIP server. ? -- regards Vikram (http://www.vicramresearch.com)

I have 20+ asterisk servers and need to network them together so a phone on any of the servers can call a phone on any other server without any trouble. I can think of IAX trunks between every server. So every server will have an IAX trunk to every server and then prefix bases routing in the dialplan for each server (I can give a number to each server and use that as a prefix for that server).

Folks! This is to let all of you know that I am making D'Link make an all out effort to make D'Link Phone DPH80 and DPH100 work with Asterisk. I have provided the Asterisk Platform to D'Link's R&D Division located in Goa, India, where their IP phone's SIP Bios is undergoing modifications based on my recommendations/suggestions. I have also provided the test bed &

Hello After having installed my X100P, /proc/pci and /proc/interrupts dosent locate them. In my PCI list is it the Communication controller: Tiger Jet Network Inc ? then is dosent have a IRQ listed in /proc/pci.. All help appreciated Thanks and Regards Ajit ===========================/proc/pci================================== PCI devices found: Bus 0, device 0, function 0: Host

I have been using the D-Link DPH-540 wireless VOIP handset, and I really like this phone. We had tried the UStarcomm phone, but the phone is used in a noisy environment and the volume wasn't loud enough. The "problem" with the D-Link phone is the Li-ion battery needs to be replaced and D-Link doesn't sell a replacement battery and I haven't found any after-market batteries.

Hello! I am having issues trying to plot to a ong (or jpg) when the R-code in a bash script is executed from cron. I can generate a pdf file, but when I try to write to a png, the file is created, but nothing is written. If I execute the bash script from my console, everything works file. Any ideas? In my cron I have SHELL=/bin/bash - otherwise /bin/shell is used and the folowing enery, so

I neade to run a script under Wine but the script requires a cmd dos so atm dosent works (i neade to connect an ftp and upload some files) is thear any emulate that i can install on wine so that i have that posibility? Thank's Helen 8)