Hello After having installed my X100P, /proc/pci and /proc/interrupts dosent locate them. In my PCI list is it the Communication controller: Tiger Jet Network Inc ? then is dosent have a IRQ listed in /proc/pci.. All help appreciated Thanks and Regards Ajit ===========================/proc/pci=================================PCI devices found: Bus 0, device 0, function 0: Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 33). Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff]. Bus 0, device 0, function 1: IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208). Master Capable. Latency=16. I/O at 0xffa0 [0xffaf]. Bus 0, device 1, function 0: ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0). Bus 0, device 1, function 1: Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 131). IRQ 5. Master Capable. Latency=64. Min Gnt=52.Max Lat=11. I/O at 0xd800 [0xd8ff]. Non-prefetchable 32 bit memory at 0xf3ffc000 [0xf3ffcfff]. Bus 0, device 1, function 3: USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7). IRQ 11. Master Capable. Latency=64. Max Lat=80. Non-prefetchable 32 bit memory at 0xf3ffe000 [0xf3ffefff]. Bus 0, device 1, function 2: USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7). IRQ 11. Master Capable. Latency=64. Max Lat=80. Non-prefetchable 32 bit memory at 0xf3ffd000 [0xf3ffdfff]. Bus 0, device 1, function 4: Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 2). IRQ 10. Master Capable. Latency=64. Min Gnt=2.Max Lat=24. I/O at 0xda00 [0xdaff]. Non-prefetchable 32 bit memory at 0xf3fff000 [0xf3ffffff]. Bus 0, device 1, function 6: Modem: Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link HAMR5600 compatible) (rev 160). IRQ 10. Master Capable. Latency=64. Min Gnt=52.Max Lat=11. I/O at 0xde00 [0xdeff]. I/O at 0xdc00 [0xdc7f]. Bus 0, device 2, function 0: PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0). Master Capable. No bursts. Min Gnt=8. Bus 0, device 11, function 0: Communication controller: Tiger Jet Network Inc. Model 300 128k (rev 0). IRQ 11. Master Capable. Latency=64. Min Gnt=1.Max Lat=128. I/O at 0xd600 [0xd6ff]. Non-prefetchable 32 bit memory at 0xf3ffb000 [0xf3ffbfff]. Bus 1, device 0, function 0: VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 33). Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff]. Non-prefetchable 32 bit memory at 0xefee0000 [0xefefffff]. I/O at 0xbc80 [0xbcff]. ===========================/proc/interrupts================================ CPU0 0: 48259 XT-PIC timer 1: 233 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 272 XT-PIC eth0 8: 1 XT-PIC rtc 11: 60 XT-PIC usb-ohci, usb-ohci 12: 26 XT-PIC PS/2 Mouse 14: 4516 XT-PIC ide0 15: 0 XT-PIC ide1 NMI: 0 ERR: 0 =============================================================
Ajit Kallingal wrote:>Hello >After having installed my X100P, /proc/pci and /proc/interrupts dosent >locate them. >In my PCI list is it the Communication controller: Tiger Jet Network Inc ? >then is dosent have a IRQ listed in /proc/pci.. > >All help appreciated >Thanks and Regards >Ajit > >===========================/proc/pci=================================>PCI devices found: > Bus 0, device 0, function 0: > Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 33). > Master Capable. Latency=64. > Non-prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff]. > Bus 0, device 0, function 1: > IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208). > Master Capable. Latency=16. > I/O at 0xffa0 [0xffaf]. > Bus 0, device 1, function 0: > ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0). > Bus 0, device 1, function 1: > Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 >Ethernet (rev 131). > IRQ 5. > Master Capable. Latency=64. Min Gnt=52.Max Lat=11. > I/O at 0xd800 [0xd8ff]. > Non-prefetchable 32 bit memory at 0xf3ffc000 [0xf3ffcfff]. > Bus 0, device 1, function 3: > USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7). > IRQ 11. > Master Capable. Latency=64. Max Lat=80. > Non-prefetchable 32 bit memory at 0xf3ffe000 [0xf3ffefff]. > Bus 0, device 1, function 2: > USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7). > IRQ 11. > Master Capable. Latency=64. Max Lat=80. > Non-prefetchable 32 bit memory at 0xf3ffd000 [0xf3ffdfff]. > Bus 0, device 1, function 4: > Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI >Audio Accelerator (rev 2). > IRQ 10. > Master Capable. Latency=64. Min Gnt=2.Max Lat=24. > I/O at 0xda00 [0xdaff]. > Non-prefetchable 32 bit memory at 0xf3fff000 [0xf3ffffff]. > Bus 0, device 1, function 6: > Modem: Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link >HAMR5600 compatible) > >(rev 160). > IRQ 10. > Master Capable. Latency=64. Min Gnt=52.Max Lat=11. > I/O at 0xde00 [0xdeff]. > I/O at 0xdc00 [0xdc7f]. > Bus 0, device 2, function 0: > PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0). > Master Capable. No bursts. Min Gnt=8. > Bus 0, device 11, function 0: > Communication controller: Tiger Jet Network Inc. Model 300 128k (rev 0). > IRQ 11. > Master Capable. Latency=64. Min Gnt=1.Max Lat=128. > I/O at 0xd600 [0xd6ff]. > Non-prefetchable 32 bit memory at 0xf3ffb000 [0xf3ffbfff]. > Bus 1, device 0, function 0: > VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI >Accelerator+3D (rev > >33). > Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff]. > Non-prefetchable 32 bit memory at 0xefee0000 [0xefefffff]. > I/O at 0xbc80 [0xbcff]. > >===========================/proc/interrupts================================>> CPU0 > 0: 48259 XT-PIC timer > 1: 233 XT-PIC keyboard > 2: 0 XT-PIC cascade > 5: 272 XT-PIC eth0 > 8: 1 XT-PIC rtc > 11: 60 XT-PIC usb-ohci, usb-ohci > 12: 26 XT-PIC PS/2 Mouse > 14: 4516 XT-PIC ide0 > 15: 0 XT-PIC ide1 >NMI: 0 >ERR: 0 >============================================================>_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users > > >Did you 'modprobe wcfxs' ? And 'ztcfg -vv' ?
The "Tiger Jet Network Inc" is the X100P..> Hello > After having installed my X100P, /proc/pci and /proc/interrupts dosent > locate them. > In my PCI list is it the Communication controller: Tiger Jet Network Inc ? > then is dosent have a IRQ listed in /proc/pci.. > > All help appreciated > Thanks and Regards > Ajit > > ===========================/proc/pci=================================> PCI devices found: > Bus 0, device 0, function 0: > Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 33). > Master Capable. Latency=64. > Non-prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff]. > Bus 0, device 0, function 1: > IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208). > Master Capable. Latency=16. > I/O at 0xffa0 [0xffaf]. > Bus 0, device 1, function 0: > ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0). > Bus 0, device 1, function 1: > Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 > Ethernet (rev 131). > IRQ 5. > Master Capable. Latency=64. Min Gnt=52.Max Lat=11. > I/O at 0xd800 [0xd8ff]. > Non-prefetchable 32 bit memory at 0xf3ffc000 [0xf3ffcfff]. > Bus 0, device 1, function 3: > USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7). > IRQ 11. > Master Capable. Latency=64. Max Lat=80. > Non-prefetchable 32 bit memory at 0xf3ffe000 [0xf3ffefff]. > Bus 0, device 1, function 2: > USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7). > IRQ 11. > Master Capable. Latency=64. Max Lat=80. > Non-prefetchable 32 bit memory at 0xf3ffd000 [0xf3ffdfff]. > Bus 0, device 1, function 4: > Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI > Audio Accelerator (rev 2). > IRQ 10. > Master Capable. Latency=64. Min Gnt=2.Max Lat=24. > I/O at 0xda00 [0xdaff]. > Non-prefetchable 32 bit memory at 0xf3fff000 [0xf3ffffff]. > Bus 0, device 1, function 6: > Modem: Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link > HAMR5600 compatible) > > (rev 160). > IRQ 10. > Master Capable. Latency=64. Min Gnt=52.Max Lat=11. > I/O at 0xde00 [0xdeff]. > I/O at 0xdc00 [0xdc7f]. > Bus 0, device 2, function 0: > PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0). > Master Capable. No bursts. Min Gnt=8. > Bus 0, device 11, function 0: > Communication controller: Tiger Jet Network Inc. Model 300 128k (rev 0). > IRQ 11. > Master Capable. Latency=64. Min Gnt=1.Max Lat=128. > I/O at 0xd600 [0xd6ff]. > Non-prefetchable 32 bit memory at 0xf3ffb000 [0xf3ffbfff]. > Bus 1, device 0, function 0: > VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI > Accelerator+3D (rev > > 33). > Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff]. > Non-prefetchable 32 bit memory at 0xefee0000 [0xefefffff]. > I/O at 0xbc80 [0xbcff]. > > ===========================/proc/interrupts================================> > CPU0 > 0: 48259 XT-PIC timer > 1: 233 XT-PIC keyboard > 2: 0 XT-PIC cascade > 5: 272 XT-PIC eth0 > 8: 1 XT-PIC rtc > 11: 60 XT-PIC usb-ohci, usb-ohci > 12: 26 XT-PIC PS/2 Mouse > 14: 4516 XT-PIC ide0 > 15: 0 XT-PIC ide1 > NMI: 0 > ERR: 0 > ============================================================> _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users-- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze
On Fri, 2003-09-05 at 00:08, Ajit Kallingal wrote:> Hello > After having installed my X100P, /proc/pci and /proc/interrupts dosent > locate them. > In my PCI list is it the Communication controller: Tiger Jet Network Inc ? > then is dosent have a IRQ listed in /proc/pci..Until you load the drivers, it won't show up in the interupts file. -- Steven Critchfield <critch@basesys.com>
Possibly Parallel Threads
- DevKit TDM400P module won't load
- TE110P doesn't appear in /proc/zaptel
- FW: [Asterisk-Users, Andrew] Will Echo problems EVER be solved, I'm scared
- insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)
- Good network printer/scanner for Centos/Linux