similar to: How to demo the Power of Asterisk

Is anybody using Mitel phones? It appears that when you page a Mitel phone using asterisk's MeetMe, the paged phone will hang up the call its on to take the page. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110621/764a6fa9/attachment.htm>

Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system to work with *? I'm not getting inbound or outbound calls to work. (Inbound caller gets line busy tone.) SETTINGS FROM MITEL: I built a Crossover cable and connected it like this: PSTN--T1--ASTRISK--T1--OLD MITEL -Crossover Cable Pin-out: 1 - 4 2 - 5

Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows. Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card. All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card. Any advice would be great. Zaptel.conf span=1,0,1,d4,ami e&m=1-23 dchan=24

I have a small government department that wants me to implement a Asterisk installation, however, they connect to the Government PBX, a Mitel SX200, and want to keep the ability to do that. I know there is no chance to connect the digital extension lines, but would it be possible to have the pbx admins send analogue extensions over and have those lines interface through an FXO interface? Or

I have an Asterisk box, 1.4.30 with a PRI. A Mitel 3300 is connected to the Asterisk box via SIP trunking. When a user calls from the Mitel through the Asterisk box the user can speak but can not hear the far end. But - when I route the Mitel user to echo() it works, send and receive. The Mitel user also can record and playback greetings. One thing I have noticed is that when the Mitel user

I know this is not strictly an asterisk issue but it is related I guess. Just to let you know that after many calls to Mitel the consensus is that they will be releasing a new version of the 5220 that is dual boot (minet and SIP) next week or the week after. This firmware will only appear on NEW phones manufactured after the release date (no one could confirm but the 23rd of sept was

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---

Hi, Some Mitel products, which are CentOS 6.x or 7.x servers based with some telephony services added, are only supported on VMware virtualisation platform, even all if theses CentOS guests are certified on last CentOS/Redhat Virtualization or Microsoft Hyper V platforms. So, at he moment we have three bad choises : - Migrate part of our virtualization services from KVM/libvirt to VMware ; -

Hi, I have a client using Mitel 5212 phones in SIP mode with a 1.4.21.1 Asterisk server (and a couple of previous 1.4 versions). They're mostly happy with the combination except for this one issue. For incoming calls only, either originating from other local SIP phones or from a PRI, calls won't get bridged (remote party get's hung up) if the call is answer too quickly on the

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

Does anyone know if this phone can or does work with Asterisk ? I have a potential client who wants to throw away their current mitel ip system (keeps crashing on a regular basis - not good for a phone-based company), but are reluctant to purchase new handsets. Thanks. Julian.

So I reached the point where my PRI is accepting incoming calls, but I cannot dialout. I must be doing something stupid, but I can't figure it out. The Asterisk box is sitting between the Mitel and the phone company, and has PRI lines to each. Asterisk was built from CVS r1-0 Log for a call from mitel heading outbound: ------------------------- -- Accepting call from '' to

We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get over 500 frame errors and over a 500 slip errors per hour. When the errors reach 1000 per hour the Mitel will take it's T1 card offline. At that point no calls can be routed from the Asterisk server to the Mitel and the TE110P reports a Yellow alarm. What can be causing all these Frame and Slip errors? We have been

I've got a new setup (different building) where Asterisk is sitting between the PBX and phone company on a E&M T1 line. Mitel PBX <-> Asterisk <-> Phone company Inbound works. Asterisk gets the in-band digits from the phone company and hands the call off to the Mitel just fine. Outbound is weird. Asterisk seems to expect that the mitel will send routing information

How would you categorize a Yellow Alarm sensed by the Asterisk side in a Legacy PBX integration? We have a Mitel SX200 connected to an Asterisk(1.2.4) with a TE110P. Twice today (first time in over a month) we received a Yellow Alarm on the TE110P. I have been able to clear it easily by restarting zaptel. Thanks in advance! -------------- next part -------------- An HTML attachment was

Has anyone here had any experience with Mitel 5220 IP phones with Asterisk? Basic features are working good, but I'm looking for more advanced features like sending text to the display or having the lights on when an extension is in use via the hint subscription. Thanks.

first, thx for --with-storages=maildir second, there is a problem when user exceed their quota < status INBOX (messages) > NO Internal error [2003-05-06 15:35:56] in logfile: imap(user): Can't create directory /var/mail/user/.INBOX: Disk quota exceeded 'user' is not able to get list of messages and delete some of them :( third, in logfile: imap(user2): maildir flags

Hello, I'm investigating a situation where there was a hundreds of minutes of calls from an internal SIP extension to an 855 number in Cambodia, resulting in a crazy ($25,000+) bill from the phone company. I'm investigating, but can anyone provide some feedback on what's happened here? I'm investigating how this happened as well as what types of arrangements can be made with the

Hi All, Our experience with * to date has been a bit limited. It's a 4xCisco 7960 network, linking our head office with a faraday caged datacenter. As a way of putting voicecomms into a sealed room, it was quick and easy to deploy, and works very well. As typically happens, we've now thought about extending the use of asterisk - and a new opportunity has cropped up. In three months