similar to: Re: Asterisk-Users Digest, Vol 5, Issue 113

I'm going to install asterisk with four digium cards. Can anyone mention a brand that carries boards with 4 compatible pci slots? Thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

What they are probably marketing is putting in their own equipment out there. I install a product that does exactly that. A paradyne jet fusion. It takes care of the part of which channels are data and which are voice. If it's anything like these, the lines will come out on pairs. You will then have to use channelbank and FXO/FXS cards to get it into your phone system. The jet Fusion

All, Thanks for taking time to read. I am wanting someone to tell me that I have a clue here and that the following proposed setup would (possibly) work. Currently existing are 4 pots lines with qty. 10 AT&T 954/854 phones. Would like to convert to asterisk and at the same time do a mild feature upgrade. Proposing to get: PIII 800MHz or better >=256MB RAM

Hi guys, I've run into a problem that I can't figure out on a bunch of handsets I have running into a Rhino Equipment 24-port FXS channel bank hooked up to a T100P and running asterisk-0.9.0 and the associated stable Zaptel release. The sidetone (your own voice that you hear in your handset, built in for comfort) is noticeably louder than it should be, and it doesn't seem to

Can anyone share any advice / documentation on how to configure a Tellabs 2572 T1 echo canceller? I connected one between a T100P and an Adtran TA750 FXO/FXS channelbank, but when echo cancellation is active I get a LOT of snap-crackle-pop (and other problems) on the line. The 2572 has a bunch of configuration options and they're impossible to guess without documentation, which I cannot find

(to mods: sorry for any extra work I've put you through. Posting from my work account, as proper) Hello all, I'm back. I've got that lucky feeling that this will all work out very soon, and I hope that that is true. The issue: In my * server I have a t100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm

I've got an * system that is having some real problems with 1.0.2. The biggest problem is that calls going through my T100P get choppy for about 10 seconds every 1 or 2 minutes. Asterisk is running on a debian stable system with current packages. The T100P is plugged into a Adit Channelbank with 8 POTS lines hooked up to the Channelbank. I've watched the vritual memory and CPU status on

Wondered if anybody might have some ideas about what could be causing this.... I have a T100p hooked up to an Adit 600 with 12 channels of voice off of a T-1 coming in. I have a t100p connected to a zhone z-plex with 24 fxs going to my stations. Some of the station are 2 line phones. These have 2 zap channels that are dialed when the extension is matched. Also, some extension require ringing 2

In my * server I have a T100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm on the card starts blinking red. Running zttool confirmed that yes, it is a red alarm. I've read a few previous posts on this type of setup and I'm not too much closer. What should I be checking next? A different cable? The

Hi ! I am connecting to Adit 600 thru a T100P card I have configured 1-16 FXS channels and 17-24 FXO. Everything looks fine on Asterisk side I get a tone on all FXS channels, but when I try to dialout thru one of the FXO channels 17-24 it doesn't connect to the POTS line and echoes back my voice. I use fxsls and fxols for the T1 channels and ls on Adit side. Whats wrong here ? here is my Adit

Hello, I am connecting Asterisk to an Adit 600 via a T100P. Unfortunately I am not able to get any lights on the T100P and the Adit 600 only shows red. I have already modprobed the t100p. Has anyone successfully connected these before? I've tried both a cross-over cable and a standard cat 5 cable, but I can't seem to get them to work. Any suggestions? Thanks! Craig

Has anyone ever heard of this so called Dynamic Impedance matching on the ADIT 600? I called their support and they've never heard of it. We are of course having echo problems are on the far end due to digital/analog conversion on the local end using a channel bank. We have purchased an ADIT 600 and yes the complaints are "far less" however we're still getting them. While I have

> -----Original Message----- > From: john lawler [mailto:maillist@tgice.com] > Sent: Wednesday, January 07, 2004 1:38 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] yet another question on DID trunks > > Hey Steven, > > Sorry to bother you yet again w/ a question on my seemingly endless > quest to get DID trunks setup for a customer. > >

Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too expensive. Can anyone recommend a decent channelbank that won't break the bank? TIA, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year

Hello, I new to this, but with the help of mailing lists archives and IRC I am able to build my PBX. Thanks to all who had help me to reach till here. I am stuck at a point where I can't find the solution on mailing lists or even on IRC. I have individual 4 DID (Direct Inward Line) coming from Telco and terminating into TA 750 to FXS card. Many of them told that Phone instrument terminates

I am having trouble getting my T100P and ADIT 600 talking. I have 2 FXO 8 port cards in the ADIT and a T1 controller card. I have a T1 x-over cable connecting two together. Here are copies of the relevant bits of my zaptel.conf and Zapata.conf Zaptel.conf span=1,0,0,esf,b8zs loadzone=us defaultzone=us Zapata.cfg context=default signalling=fxs_ks group=1 channel => 1-24 My

Hello, I don't have any experience with channel banks and would appreciate any feedback on my theory outlined below: We have a single T1 entering the building with channels 1-12 being voice lines and 13-24 being a 768k internet connection. This T1 terminates to an Adit 600 (T1-1). Here's what I know. Channels 11-12 go out the Adit 600's 25-pair connector to a wiring block (and

Does anyone have any recommendations on how to connect 160 analogue phones to an asterisk PBX? Background information: A client wishes to replace their current PBX with a new VoIP system. Currently they have 2 PRIs. I intent to set up 2 asterisk PBXs with Debian GNU/Linux on raided drives. These drives will be mounted only read-only to recover gracefully from power-cycles. I am considering 2

Hello, I have been researching Echo Can's for a while now, and wanted to post this out to the list to solicit feedback (and if my assumptions are correct, hopefully help others out)... If anyone out there knows anything about wiring up an Echo Can, and my outline below is incorrect, please let the me/list know.. I have posted the Documents I received from Tellabs at:

Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm