I think there are issues with combining flash-hook supervised transfers
with meetme conference bridges. Can you find out if that took place, i.e.
someone tries to transfer into a meetme conference?
Mark
On Thu, 6 Nov 2003, Andy Hester wrote:
> Wondered if anybody might have some ideas about what could be causing
> this....
>
> I have a T100p hooked up to an Adit 600 with 12 channels of voice off of a
> T-1 coming in.
> I have a t100p connected to a zhone z-plex with 24 fxs going to my
stations.
>
> Some of the station are 2 line phones. These have 2 zap channels that are
> dialed when the extension is matched.
> Also, some extension require ringing 2 phones at the same time. For example
> the boss wants his assistants phone to ring also when someone calls him.
>
> Then the calls roll to a receptionist if not answered.
> Finally the call goes to voicemail
>
> This has been working fine for weeks now, but today the customer told me
> that one of the phones configured this way was hearing 3 to 4 other
> conversations on their phone. The phone did not give dialtone, but in
> picking up the handset you could hear someone shuffling paper working at
> their desk etc. When certain other extensions were on calls, you could
hear
> clearly the person they were connected to, but not the person in the
office.
> I checked all the wiring and couldn't find any problem. I rebooted the
> channelbank thinking maybe somehow it had gotten screwy. No change. Then,
> just for grins, I stopped and restarted *. Voila, the problem was gone.
>
> Can anyone think of a scenario that could cause * to do this?
>
> Thanks,
> Andy
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>