similar to: Cisco router for PRI termination?

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

Hello, I've got an ISDN PRI circuit terminating in a Cisco AS5350, which in turn is talking to an Asterisk server via SIP for call origination and termination. Seems simple enough, and it works for the most part, but: 1) Caller ID name data comes in on the PRI, but doesn't appear to get handed off to the Asterisk server via SIP, at least not in any format that Asterisk

HI, I have been pulling my hair out trying to get a Cisco MC3810 to interface my Asterisk box with a T1. I am able to make outgoing calls but incoing calls never reach my Asterisk box. The cisco give a fast busy when I try to call one of the DID's. When playing around with the dial-peers I can get the cisco to pick up the call, but then it forwards the call back to the ANI that is dialing.

I would think I could do this but for some reason I am stymied. I have a PRI from RCN connected to a cisco 3640 (in my day "cisco" is all lower case :-)). My config looks something like this on the cisco... --------------------------------------------------------- voice-card 3 dsp services dspfarm ! ip cef ! isdn switch-type primary-5ess ! controller T1 3/0 framing esf linecode

Hello, everyone. Right now, we are trying launch our own PBX system based on Asterisk(Fedora) with Cisco 2611. Cisco has 2 port FXO card installed on it. For testing, I have 2611 hooked into phone line with number of xxx-xxx-xxxx fine. (I'll call it F). Using softphone, I can dial in extension 1001 on asterisk, which should talk to cisco. After initial connection to Asterisk, I have try to

List users, It's been a while since I've posted here, but I've been hard at work pushing toward our large scale Asterisk goal and keeping up with this list can be a full time job by itself (I have19,543 unread list messages!!). This Friday, September 16th 2005, my team will be at the MCI Development Lab in Richardson, Texas testing our setup. We have a three server system

I'm experimenting (using for the first time) with using a cisco3620 to connect to the PSTN via a channelised E1 interface, with * handling all of the SIP calls. If anyone has any installation tips / help / documentation I would be most appreciative :) However, my first question is this: when I am in the setup, I see the following: Current interface summary Controller Timeslots

I see a lot of comments but no actual show runs. Can someone post a 7206 config. I am having a dickens of a time getting calls to pass. I currently have the following loaded. Cisco IOS Software, 7200 Software (C7200-IK9O3S-M), Version 12.3(8)T6, RELEASE SOFTWARE (fc2) Thanks !!! Jerry -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 /

Hi i test a new equipment on my backbone: a Cisco AS5300 with voice dsp ressource connected at a E1 Voice Link. I want that all call incoming on the cisco 5300 are sent to Asterisk and all Asterisk outgoing call are sent to Cisco AS5300. Actually, i configure the AS5300: isdn switch-type primary-net5 ! voice service voip sip ! voice class codec 400 codec preference 1 g711alaw codec

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Is any one else having problems with Voicepulse today? Suddenly, I can't register and calls to my Voicepulse numbers get a fast busy. Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

A colleague found some VMX files which omit the deviceType field. This allows -i vmx mode to parse them. Rich.

Hi all, I bought a couple phones for really cheap just for a simple solution. I'm trying to get a few 7910 to work with *. I'm just not sure how to get them to work. The 7910 just sits there "configuring IP" Here is a copy of my skinny.conf. the extensions.conf is default. I just want to bring the system up in default before a start making changes. Do I need to make

I have been transcoding a group of panoramic videos using ffmpeg2theora 0.26 i just completed transcoding Naples Cycle HDV.vwmovie the resulting video has some strange colors in it the source video can be got from http://www.eyesee360.com/videowarp/examples/ the resulting images and the theora file can be download from http://www.lightningridgecommunity.com/images/ tom at

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

I am routing outgoing calls through a sip gateway. The calls go through no problem, however the ringing in the callers ear begins as soon as the last digit is dialed. This has two nasty side effects. First, the caller hears 1-2 more rings than the callee. Second, and more importantly, if the callee's line is busy, the caller continues to get hear ringing, even though the gateway has

I have a problem that is almost certainly nat-related, but I can't figure out what's happening. Since moving the Sipura behind a NAT server (Linksys), I am no longer able to call between the two lines on the same Sipura. When I dial one extension from the other, it rings, but immediately after I pick up the ringing phone, the call is uncerimoniously dumped. I can tell the call

Since connecting a PRI to a Digium T100P, I have been seeing the following messages in syslog every few minutes: Jun 4 06:51:54 pbx asterisk[13435]: WARNING[1209214400]: chan_zap.c:6176 in zt_pri_error: PRI: Read on 56 failed: Unknown error 500 Jun 4 06:51:54 pbx asterisk[13435]: NOTICE[1209214400]: chan_zap.c:6913 in pri_dchannel: PRI got event: 8 on span 1 Sometimes, these messages come out

Heh guys, I just received a T400 card, I've been using a T100 for a little while, and it works fine when using a raw channelized T1. I'm relocating my asterisk machine, and PRI's will only be available, haven't found any good config info for PRI's, can someone point me to PRI config info, or let me know what changes I need to make in order to bring them up, I imagine,