similar to: FXO/FXS card

So I took a chance with an X100P knock-off on eBay. I'm running Asterisk + FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel 2.6.16.16. Everything has been fine up until now. I compile the 1.2.5 Zaptel drivers without a problem, get the udev configuration in, modprobe zaptel, and finally modprobe wcfxo. At this point, I get the message: ZT_CHANCONFIG failed on channel

I am considering a G5/XServe for a conferencing system. I need to put a TDM card in the machine for timing. Is anyone out there using Asterisk on Mac with zaptel drivers? I am looking at using Linux for the OS. If so what is your experience? Have a great day! Geoff

Does the voicetronix card work with Asterisk? -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of woody+asterisk@solutionsfirst.com.au Sent: Monday, February 02, 2004 11:06 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Pictures of new multiport FXO/FXS from digum > -----Original Message-----

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12

I've got a number (10) Cisco 7960's connected to my network. All the phones work perfectly except one. The asterisk console keeps throwing up: Jun 22 15:39:15 NOTICE[-1147470928]: chan_sip.c:5887 sip_poke_noanswer: Peer '4001' is now UNREACHABLE! Jun 22 15:39:27 NOTICE[-1147470928]: chan_sip.c:4925 handle_response: Peer '4001' is now REACHABLE! Jun 22 15:42:08

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

Has anyone been able to sucessfully use 2-4 X101P clones with Asterisk on a single system ? I'm using one Encore MD 3200 modem sucessfully, alongside a TDM400P (3 FXS, 1 FXO) and would like to be able to use up to 4 X101P on a single system. In most cases I'll have 2 or 3 instead. I understand all the issues with interrupt sharing and PC motherboard quality. Just need to know if any

Hello ! I 'm trying T.38 faxig with spandsp using rxfax/txfax as fax terminal. As another endpoint I 'm using Grandstream HT 486 ATA and a fax machine. Has anybody success with the HT486 as T.38 terminal ? ATA as originator: I managed only onetimes a successfull T.38 fax session. The other times the HT486 did not initiate a re-invite with T.38 parameters. Or shall the Terminator

It's that time again. I'm stuck with a bunch of older Powermac G4's that I either need to repurpose or give the heave ho. I've not tried CentOS on Mac hardware before. Would the following config be suitable for a (somewhat slow) workstation? PowerMac G4 400mhz 256mb RAM 40gig ATA disk Some sort of dual-head ATI video setup with 64mb VRAM (I've forgotten which cards they

One of the suggestions I got for dealing with my analog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically

Hi, Firstly it appears you are not passing the extension to be dialed to the Dial command, so the driver is dialing badly. It should be something like dial(vpb/1-2/102) since this is a line port. Admittedly the driver needs to check better that the number it is trying to dial is legit but it doesn't :) P. --- You Wrote --- From: "Jacky" <jacky.taiwan@msa.hinet.net>

Hi guys I know this has been asked on the list before, but my hard drive crashed and I lost all of the past posts, I need to know what motherboard works ok for asterisk, I have no problems with the Dual and Quad Xeon processor boards I have used. Now I plan on building a Pentium 4 3.0 with hyper-threading. I looked through the wiki and could not find the recommended P4 board. Does anyone have

I have searched for how to locate echo cancelation on SIP clients, but cant find anything and echocancel=y doesnt seem to have any effect. Configuration: CVS-HEAD from last month iPAQ h5500 with SJPhone (gsm/ulaw/alaw) Problem description: When I place or receive a call I hear a faint delayed echo of myself. The other party hears a really bad nonmuted echo that makes the call unusable. Aside

Been using a few different FXO interfaces (X100P, Voicetronix, and SPA-3000) at a couple sites and they've all run into nasty issues at times. I'm looking at moving one of my offices and am in the market for a solution for connecting 4 FXOs. I got excited about recent offerings from Digium and Sangoma in the way of new cards but I hear they're causing troubles for more than a few.

at http://wiki.openpbx.org/tiki-index.php?page=Easy+route+to+building+OpenPBX.org there is the following adduser command: adduser --no-create-home --ingroup openpbx --disabled-password --disabled-login openpbx This does NOT seem to be the right format for Centos. So far, using man, I have come up with; adduser -M -g openpbx What else do I need?

I have just bought a powermac G5 to expand my recording studio and cannot open my .exe software! My mac has PPC processor and cannot run most wine things (Crossover, Darwine) or has failed when I have tried. I cannot record until this is done so please HELP THIS POOR LAD IN NEED!

Hello, What do you think of this project www.openpbx.org ? Something like ser and openser ! Kinds Regards Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com

Hiya, There is another plugin which supports mounpoins AFAIK. http://www.oddsock.org/tools/dsp_oddcast/ Try it. > -----Original Message----- > From: owner-icecast@xiph.org [mailto:owner-icecast@xiph.org]On > Behalf Of Bryan Walls > Sent: Friday, March 30, 2001 8:28 PM > To: icecast@xiph.org > Subject: Re: [icecast] newby question: Is there a way to direct > streamstoamount

First off, I'm sorry for sending so many messages to the list-serv. Hopefully this will be my last for a while! I was going to use my WRT54G router as a small Asterisk box, but I forgot that I had a spare eMachines computer (Intel Celeron 633 MHz, 20GB HD, 64mb RAM). Will this machine work OK for a very simple dedicated home Asterisk box? Also, what is easiest linux distribution to use and

Hi All, Does anyone here on the list have CentOS 5.1 running on a PS3? I would like to look at integrating a couple of PS3 nodes into our cluster for it's ability to use the Cell processor inside and was wondering if anyone had any experiences.