similar to: TDM400 FXO outgoing call only

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

My TDM400/zaptel 1.2.10/Asterisk 1.2.13 suddenly stopped bridging outgoing FXO calls. If I make a call (from an FXS channel) to a PSTN destination, and the other side answers, Asterisk will show continued ringback on the FXS channel, while the PSTN side hears silence. No error message appears. If a call from PSTN terminates on the same FXO, Asterisk can still ring the FXS channel, and when

Hi, I'm running * 1.2.7.1 on Red Hay 9.0 w/ a TDM 400 2 x FXS, 1 x FXO. I'm using a VTech cordless that makes three short beeps when someone another extension is picked up, presumably this lets you know if someone is trying to listen in.. Everything works, except the VTech now makes the three beeps everytime you try to use it, even if another extension is in use. It seems as though the

When a caller hangs up (e.g. after leaving a voicemail), my British Telecom exchange sends a continuous tone for about 15s and then silence. I can't get asterisk to recognise this tone as a hangup indication. I have tried indications.conf with both country=uk and country=us. My zapata.conf has busydetect=yes, callprogress=yes and I've tried setting busycount from 1 through 7 I am using

I need to increase reliability at an office as SIP/Internet provider outages are causing some issues. What would be the least expensive analogue card that people are using reliably? Thanks! jlc

Hi all, I have hit a wall configuring a TDM400, I have set these up before without issue but today I just can't seem to figure out what I am doing wrong. On an incoming call the following is produced in the Asterisk console with verbose 4 -- Starting simple switch on 'Zap/2-1' Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring Begin)... Mar 22

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

Hi, Has anyone ever experienced crosstalk with sangoma analogue cards on 64bit? We have exhausted every test to try and replicate this and find a solution with Sangoma tech support, but we can not fix it. We are about to try the card and four *seperate* UK BT lines in a 32bit system. The current system is a 4gb, dual core cpu with pbx in a flash 1.4, Zaptel and Asterisk 1.4.21-2 Currently we

Hi! Is possible to use X100p TDM400P, Tdm410p, Tdm400, A400p, Ax400p or any others digium card FXO for use Fax modem? Thanks.

Hi, I have two asterisk with the Digium TDM400 installed on the first and the TDM800 installed on the second. Both systems are linux Debian 4.0 whith kernel 2.6.18 and asterisk 1.2.24. Often the cards stop answering calls, and I can't make or receive calls; I need to reboot the system or manually reload the zaptel modules to restore it. I've tried zaptel versions 1.2.18, 1.2.19 and 1.2.20

-------------------------------------------------------------------------------------------- Originally posted at http://forums.digium.com/viewtopic.php?t=18045 -------------------------------------------------------------------------------------------- Hi! I'm trying to configure a DISA setup (Asterisk 1.4.11). Only, executing DISA seems to prevent any DTMF detection capability when using

Hi all, Can someone give me a simple rational explanation why a $5 analog handset gives me no echo whatsoever on an analog PSTN line, but PSTN-VoIP devices such as the TDM400 and Sipuras do and thus require software-based echo cancellation. Surely a $5 analog handset does not have an "echo canceller". The echo I mean is when I hear myself while talking to another party. I have heard

Hey, anyone know if it's possible to receive faxes through a Junghanns bristuff quadbri card? In germany, currently I have faxes coming in on DID line into QuadBRI and then passing to Digium TDM400 (analog) and into faxmachine. But the reliability of TDM card is spotty, so I want to maybe just accept faxes in on ISDN card and save on asterisk system ...? keeping digital signal strong ...

Hi, all Did anyone tried TDM400 card on old main board (Intel 440LX chipset -- PII)? The reason I am asking is because TDM400 needs PCI2.2 and main board is PCI2.1 I do not want to upgrade yet. Thanks, Rudolf

I recently swapped 2 FXO modules on to what had previously been a 4 FXS version of the TDM400 board. The FXS ports are recognized - the FXO ports don't appear to be recognized (ie modprobe wcfxo and ztcfg both say channel 1 isn't there). Has anyone experienced this problem? All software is current as of this AM. If the old FXS modules are re-installed all works just dandy (other than

Hi all !!! I would like to install asterisk in Xen domU using TDM400 hardware. Somebody know a howto or tutorial about that ? Thanks in advance roberto -- Ing. Roberto Pereyra ContenidosOnline http://www.contenidosonline.com.ar

Hello, I have the following configuration : E100P -> * -> TDM400 -> Modem When I receive FAXes, about 20% of them are corrupted : pages are not always complete. If the fax is complex or with numerous pages, it's usually a mess. Before that, I was using spandsp with success. Unfortunately it's too picky with some broken fax (training failed). Since this failure only occurs with

Hi, I have a FAX machine connected to a TDM400 card FXS port. When I receive a fax call through X100 and transfer it to that extension, the FAX machine display REC, but nothing happen (no fax received). There is something special to be done for this configuration? Thanks, Dan

Has anyone had success with the TDM400 in production? I have multiple boxes where these cards lock up and the only thing that will fix them is to unload *, modprobe -r wctdm, modprobe wctdm, load asterisk. Does not matter if it is a FXS/FXO module. I know this topic has been discussed many times before, but my questions is not "is anyone else having this problem" since I know that

I am having an issue where my TDM400P FXO module stops acknowledging incoming rings after running for about a month. My system is an AMD Athlon XP 2800+ with 256MB RAM, ABIT NF7S motherboard, Slackware (Linux 2.4.26) and Asterisk from CVS Stable (1.0). All outbound dialing continues to work during this condition. Stopping and restarting Asterisk does not resolve this issue. The only resolution is