similar to: Mitel 5010 +5220

Does anyone know if this phone can or does work with Asterisk ? I have a potential client who wants to throw away their current mitel ip system (keeps crashing on a regular basis - not good for a phone-based company), but are reluctant to purchase new handsets. Thanks. Julian.

Hi, I think this is one area that needs to be developed. I am curently implementing a system for my home so cannot really justify the cost of financially supporting the development of this when all I really need to do is buy a telephone extension lead for my existing fax modem!!! I am more than willing to devote some testing/documentation time (I am not really a programmer) if that helps.

Hi All, I know that this may not strictly be an asterisk issue, but if anyone has any ideas on this prob it would be appreciated. I have a working asterisk setup using Suse 9.1, a BT ISDN BRI card (Fritz?), sipura 3000 and a few cisco 7940's. I wanted to do add faxing into the equation, so I thought I would try and setup the following: PSTN->asterisk->hylafax->pc At the moment

Has anyone here had any experience with Mitel 5220 IP phones with Asterisk? Basic features are working good, but I'm looking for more advanced features like sending text to the display or having the lights on when an extension is in use via the hint subscription. Thanks.

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---

Hi All I have recently downloaded Asterisk and was so impressed I thought I would setup a home server and I went out and got myself a couple of cisco 7940's. (and a sipaura 3000!). thanks to various posts on this list and the voip-info site I have managed to get chan_sccp setup and working with the 7940's but the I tried to get the messages, services and softkeys working. It seems

Hi Folks, Just in case there are any Mitel gurus here: 1) Is it possible to convince a non-dual mode 5220 phone to 'upgrade' to the SIP firmware? I have inherited one that's Minet only. 2) I have a 5310 conference unit and 5235 phone in SIP mode, but someone's lost the connecting lead. Can anyone recommend anywhere in the UK for a replacement lead or confirm the pin-out so I can

Have some 5220's that are MiNet only and I was wondering if anyone has ever reflashed it to MiNet/SIP. Tried to fake out the phone by redirecting it to a TFTP server with the SIP image, it loads it, freaks out, and reboots. tia

Hi All, Has anyone had experiences with Asterisk and ISDN Gateways or cards? I am looking to setup a home phone system using asterisk and am looking to convert my two existing no's to a single isdn2e line. I was wandering if anyone could recommend which is better to use with asterisk - ISDN Card or gateway? also which brands are best with linux/asterisk? I have used eicon BRI cards for

I have a small government department that wants me to implement a Asterisk installation, however, they connect to the Government PBX, a Mitel SX200, and want to keep the ability to do that. I know there is no chance to connect the digital extension lines, but would it be possible to have the pbx admins send analogue extensions over and have those lines interface through an FXO interface? Or

Hello, Long time subscriber/reader of this list - thank you for all the great ideas. Scenario: We currently provide a hosted ACD system using Mitel phones (speaking the Minet protocol) to an NCI based server solution. The logic behind this choice was the emulation of key system features etc... Many of our clients have asked for basic call queue functionality: - Agents having the ability to

Hi All, Here at my office we have two basic ISDN Access with two phone lines each. We would like to install an Asterisk PBX. The question is: How can I connect the ISDN lines to Asterisk? Is it possible to connect to a DIGIUM Wildcard TE410P card? Or this E1 card is only for PRI access? Any other suggested and tested hardware for a production box? Let me know, -Z --

When I installed my first home-PBX three years ago, I was looking at "cellsockets" -- devices which will accept certain cellular phones and provide an RJ11 jack, generating the ring-voltage and recognizing DTMF, which in turn makes your cell-phone look like a CO line. Pretty cool stuff, in theory, but it just didn't seem to be worth the cost, especially since it locks you to a

Has anyone else had issues with upgrading from SIP 2.2 to SIP 4.4 on the Cisco 7940? I'm following the directions outlined by Cisco. Is there a trick that I'm missing? Clues welcome.

Anyone had any luck configuring the hold button successfully on a Mitel 5220 SIP phone? Xfer works great. Call completion works fine both directions. Audio has been beautiful. With a working system hold button, this would be a really usable phone. The hold button does make the call appear to be on hold: the light is blinking, the other party is still silently connected, I can pick up a call on

Rene, We are using the 5220 with Asterisk with no problems. The current firmware for the phone is 3.1.0.10, which you can download from http://sipdnld.mitel.com/ If you post your sip.conf file we can see if there's any errors. Cheers Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system to work with *? I'm not getting inbound or outbound calls to work. (Inbound caller gets line busy tone.) SETTINGS FROM MITEL: I built a Crossover cable and connected it like this: PSTN--T1--ASTRISK--T1--OLD MITEL -Crossover Cable Pin-out: 1 - 4 2 - 5