Displaying 20 results from an estimated 6000 matches similar to: "zaphfc crashes Linux"
2004 Nov 20
2
zaphfc sound problems
hi list.
after my unsuccessfull experiences with mISDN i tried again to implement
a zaphfc based solution.
problem is: sound on calls via capi is stuttering/broken and therefore
unuseable.
my conf:
- cel 1300, 256mb ram
- avm b1 via capi connected to my outgoing ISDN
- acer surf pci via zaphafc and crosslink cable with termination as
internal bus
- siemens gigaset 3035 as internal phone
-
2004 Jun 30
6
zaphfc - hfc pci based ISDN card : point2point & DDI
hello,
anyone has worknig ISDN hfc-pci card in DDI (DID) point2point mode?
what kernel ?
and second question mISDN driver .. anyone has working solution with
mISDN and maybe fritz card?
what you suggest for DDI -> point2point mode (card,kernel,chan_..., ...) ?
thank you,
Tomaz
2003 Nov 19
7
FYI: Simple Small Asterisk install..
Hi,
If anyone is looking for a small Asterisk installation I have managed to
get it down to 296MB (If you remove the kernel source code.. could
probably be made smaller if some of the devel packages and asterisk
source is removed as well.)
To do it I used Trustix Secure Linux 2.0 (http://www.trustix.net), did a
minimum install with ssh support(92MB) and then added the required
packages
2004 Jan 14
7
Why I can not use the conference
Hi All,
The meetme.conf have created as below:
[rooms]
conf => 101
conf => 102
and extensions.conf as below:
exten => _1XX,1,MeetMe,${EXTEN}
why the warning printed when I called 101.
WARNING[27660]: File pbx.c, Line 1051 (pbx_extension_helper): No application 'MeetMe' for extension (ipcentrex, 101, 1)
And I found asterisk have not load the meetme.conf when it starts up.
2004 Aug 11
4
zaphfc problems...
asterisk-users-admin@lists.digium.com wrote:
> It's running Debian Sarge with the stock 2.4.26 kernel (I
> know it's still an "unstable" release, but I'd need to jump
> through all sorts of hoops to get Woody working properly).
I wouldn't make a fuss about this. sarge is at least as good
as woody and much more up to date for the stuff asterisk can
do /
2004 May 06
3
Dial internal phones problem - zaphfc
Sorry that I wrote in german :
Ich benutze asterisk mit dem zaphfc Treiber.
Jetzt hab ich folgendes Problem, habe 2 ISDN-Telefone angeschlossen.
zaphfc im nt-mode.
Anrufe von ausserhalb per sip (sipgate.de) kommen an.
Wenn ich aber intern zwischen den zwei Telefonen (Ascom Eurit 30) sprechen
m?chte geht das nur wie folgt :
Erst die Nebenstelle w?hlen und dann den H?rer am Telefon abnehmen.
2005 Mar 23
1
Zaphfc + PRI card problem
I have the latest bristuff, a zaphfc card for external calls and a PRI
card for connecting to a PBX as a channel bank.
With a BRI I would expect to be able to have two incoming calls going at
the same time, but when I try it, one call connects and the other gives
the following console message, a busy tone, and then a hangup:
Mar 23 19:18:35 WARNING[5595]: chan_zap.c:7512 zt_pri_error: PRI:
2005 Sep 23
1
zaphfc problem: overlapdial don't work after update bristuff
hello,
I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a
Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and
zaphfc driver - point2point mode -.
---------
| TELCO |
| BRI |
---------
|
| PBX external S0
--------
| PBX |
--------
| PBX internal P2P S0 NT Mode
|
| HFC-S Card P2P TE Mode
2004 Sep 29
0
Big zaphfc issues
I have a "Cologne Chip Designs GmbH ISDN network controller" in my
asterisk box, and an ISDN line connected up to it. I downloaded the
bri-stuff 0.1.0-RC4a package from junghanns.net and used that to compile
asterisk using these instructions:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20zaphfc%20install
When I try to call my asterisk box, my sip phone rings twice and then
the
2004 Jun 16
3
ZAPHFC - only for * 0.7.2?
I've got Zaphfc working running Asterisk v. 0.7.2
Then I have tried with Asterisk V. 1.0 and the latest from CVS - with no succes.
Has anybody got zaphfc working with newer version than 0.7.2 ?
NR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040616/32481fca/attachment.htm
2004 Sep 22
4
zaphfc NT-mode can't dial outgoing
Hi Guys,
i've successfully installed the current bristuff, everything works fine,
exept one thing:
As soon as i pick up the phone that is connected to the bri-card, asterisk
jumps into
extension s of the context that is specified in zapata.conf, if i have
immediate=no then
i hear the normal dialtone for about 1/10 of a second.
Any hints what i'm doing wrong? If i dial the number
2003 Jun 04
2
chan_capi with avm c2 only uses one BRI
hi all
it seems like whatever I do, I can't use more than 1 BRI on my AVM C2 with
chan_capi. Both channels seem to work, but not at the same time. And - yes -
they're connected to different NT boxes :)
Any ideas? kapejod?
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356
Computers are like air conditioners.
They stop working when you open
2005 Aug 21
2
Asterisk 1.0.9 on SuSE 9.2 with ISDN BRI & zaphfc?
I would like to know how to install asterisk 1.0.9 with zaphfc working
on a SuSE 9.2. I tried this:
- The rpms with SuSE 9.2 are asterisk 1.0.6
- bristuff works, except for zaphfc, which doesn't compile.
- The official asterisk download file doesn't contain isdn bri support
Any ideas?
Lars Dybdahl.
2004 Jan 24
1
Is there any plans for Digium ISDN BRI card?
Yes, i know that there are many ISDN card on the market.
But when i spend money for ISDN card, i prefer to be Digiums, to get all
support and help Asterisk :).
2004 Jun 07
1
Zaphfc and BRI problems in Portugal...
Hi -
Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time.
System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below:
Is there anything magic about Portuguese ISDN? The PCI bus in the
2005 Jul 16
3
Multiple ISDN BRI Units with Asterisk usingBristuff zaphfc in NT mode?
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zoltan Szecsei
Sent: zaterdag 16 juli 2005 12:54
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Multiple ISDN BRI Units with Asterisk
usingBristuff zaphfc in NT mode?
>> Maybe this is rather a hardware question,
2004 Sep 09
0
zaphfc errors
bri-stuff.0.1.0-RC4a on debian sid with 2.6.7 kernel
isdn sk:
Bus 0, device 18, function 0:
Network controller: Digi International Datafire Micro V (Europe) (rev 2).
IRQ 17.
Master Capable. Latency=16. Max Lat=16.
I/O at 0xe400 [0xe407].
Non-prefetchable 32 bit memory at 0xd8021000 [0xd80210ff].
i still receive error messages continuosly (every few seconds)
i
2005 Jul 16
1
Multiple ISDN BRI Units with Asterisk using Bristuff zaphfc in NT mode?
Maybe this is rather a hardware question, but I am posting it on this
list because the probability of someone else of you having tried this is
greater here than other places I can think of.
I have an ISDN card that is setup in NT mode using the zaphfc driver in
bristuff, and I got it working perfectly with one ISDN phone using a
crossover cable and 100 ohm termination at the end of the cable.
2004 May 25
1
D-Channel on span 1 up/down + frame slips with zaptelBRI
I have installed two HFC PCI A-cards running zaphfc from bristuff-0.0.2,
which seems to work quite fine, but I continously receive the messages
"D-Channel on span 1 up" followed by "D-Channel on span 1 down" with a few
seconds interval. Why is that? Bri intense debug log and configuration
files below.
I don't need ztdummy or zaprtc, do I? I get some frame slips as well,
2004 Sep 11
2
Leading '0's and what do 'pri_dialplan', 'pridialplan' and 'prilocaldialplan' in zapata.conf do?
Hi all,
I've been batting my head against a brick wall for the best part of the day
and still haven't got any further (apart from getting a big headache, that
is). I've searched the Wiki and Googled the hours away, but I still can't
find supportive documentation.
I've just replaced my ISDN Fritz!/chan_capi setup with a HFC/Zap
configuration and had the following problems:
1