I will reply to my own question in a case the answer is of use to others.
I rebooted my Asterisk server and now it seems to work OK again.
I suspect that after a while the zaphfc BRI interface has problems and needs a
reboot.
I have seen different problems like this, i.e. problems that occur over time
especially with answering calls, with the zaphfc drivers before.
A reboot usually cures it for a while, but it would be great if such a thing
wasn't needed.
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com on behalf of Rob Scott
Sent: Wed 3/23/2005 7:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Zaphfc + PRI card problem
I have the latest bristuff, a zaphfc card for external calls and a PRI
card for connecting to a PBX as a channel bank.
With a BRI I would expect to be able to have two incoming calls going at
the same time, but when I try it, one call connects and the other gives
the following console message, a busy tone, and then a hangup:
Mar 23 19:18:35 WARNING[5595]: chan_zap.c:7512 zt_pri_error: PRI:
received SETUP message for call that is not a new call, wicked!!!
Mar 23 19:18:37 WARNING[5595]: chan_zap.c:7512 zt_pri_error: PRI:
received SETUP message for call that is not a new call, wicked!!!
-- Channel 0/2, span 1 got hangup
Anyone know what this means?
I guess I should be able to have two simultaneous incoming calls over a
BRI card, no?
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3407 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20050324/eca7850b/attachment.bin