tuned@fan.priv.at
2005-Sep-23 01:41 UTC
[Asterisk-Users] zaphfc problem: overlapdial don't work after update bristuff
hello,
I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a
Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and
zaphfc driver - point2point mode -.
---------
| TELCO |
| BRI |
---------
|
| PBX external S0
--------
| PBX |
--------
| PBX internal P2P S0 NT Mode
|
| HFC-S Card P2P TE Mode
---------
| * |
| BOX |
---------
Since nearly one year it runs Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b
fine. after dialing the internal S0 number (61) I get overlapdial and
dialtone.
[example dial the PBX S0 with Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b]
-- Accepting AUTHENTICATED call from 192.168.255.1, requested format = 8,
actual format = 8
-- Executing Dial("IAX2/ogo@call_saar/1",
"Zap/g1/61|60") in new stack
-- Called g1/61
Sep 23 10:27:50 NOTICE[229390]: chan_zap.c:8725 pri_dchannel: SETUP_ACK for
'Zap/1-1'
-- Accepting overlap call from '' to '<unspecified>'
on channel 0/2, span 1
-- Starting simple switch on 'Zap/2-1'
^^^^^^^^
here I get a dialtone from PBX and I can dial
start dialing for 8 seconds
for different reasons I tried to update on latest bristuff-0.2.0-RC8n.
after update the zaphfc overlap dial don't work anymore.
when I dial the S0 bus it jumps directly into 's' extension,
which does not exisist in the context and I get 'no number' from PBX.
zapata.conf:
------------
[channels]
switchtype = euroisdn
signalling = bri_cpe
pridialplan=local
echocancel=yes
immediate=no
overlapdial=yes
group = 1
faxdetect=both
context=fromisdn
channel => 1-2
zaptel.conf:
------------
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
extension.conf:
[fromisdn]
; example dial to BRI on other location
exten => _0.,1,Dial(IAX2/call_saar/${EXTEN}@intern,60)
exten => _0.,2,Congestion
exten => _0.,102,Hangup
Johann Steinwendtner
2005-Sep-23 04:46 UTC
[Asterisk-Users] zaphfc problem: overlapdial don't work after update bristuff
I had the same problem. It seems that a fix into bristuff for .at
does not work very well.
I 've patched chan_zap.c
Best regards
Hans
old:
} else {
if (pri->nodetype == BRI_CPE) {
/* fix for .at p2p bri lines */
pri->pvts[chanpos]->exten[0] = 's';
new:
} else {
if ((pri->nodetype == BRI_CPE) && (!pri->overlapdial)) {
/* fix for .at p2p bri lines */
pri->pvts[chanpos]->exten[0] = 's';
tuned@fan.priv.at schrieb:> hello,
>
> I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a
> Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and
> zaphfc driver - point2point mode -.
>
>
> ---------
> | TELCO |
> | BRI |
> ---------
> |
> | PBX external S0
> --------
> | PBX |
> --------
> | PBX internal P2P S0 NT Mode
> |
> | HFC-S Card P2P TE Mode
> ---------
> | * |
> | BOX |
> ---------
>
> Since nearly one year it runs Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b
> fine. after dialing the internal S0 number (61) I get overlapdial and
> dialtone.
>
> [example dial the PBX S0 with Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b]
> -- Accepting AUTHENTICATED call from 192.168.255.1, requested format
> = 8, actual format = 8
> -- Executing Dial("IAX2/ogo@call_saar/1",
"Zap/g1/61|60") in new stack
> -- Called g1/61
> Sep 23 10:27:50 NOTICE[229390]: chan_zap.c:8725 pri_dchannel: SETUP_ACK
> for 'Zap/1-1'
> -- Accepting overlap call from '' to
'<unspecified>' on channel 0/2,
> span 1
> -- Starting simple switch on 'Zap/2-1'
> ^^^^^^^^
> here I get a dialtone from PBX and I can dial
> start dialing for 8 seconds
>
> for different reasons I tried to update on latest bristuff-0.2.0-RC8n.
> after update the zaphfc overlap dial don't work anymore.
> when I dial the S0 bus it jumps directly into 's' extension,
> which does not exisist in the context and I get 'no number' from
PBX.
>
> zapata.conf:
> ------------
> [channels]
> switchtype = euroisdn
> signalling = bri_cpe
> pridialplan=local
> echocancel=yes
> immediate=no
> overlapdial=yes
> group = 1
> faxdetect=both
> context=fromisdn
> channel => 1-2
>
> zaptel.conf:
> ------------
> loadzone=nl
> defaultzone=nl
> span=1,1,3,ccs,ami
> bchan=1-2
> dchan=3
>
> extension.conf:
>
> [fromisdn]
> ; example dial to BRI on other location
> exten => _0.,1,Dial(IAX2/call_saar/${EXTEN}@intern,60)
> exten => _0.,2,Congestion
> exten => _0.,102,Hangup
>
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>