similar to: Mitel 5010

I know this is not strictly an asterisk issue but it is related I guess. Just to let you know that after many calls to Mitel the consensus is that they will be releasing a new version of the 5220 that is dual boot (minet and SIP) next week or the week after. This firmware will only appear on NEW phones manufactured after the release date (no one could confirm but the 23rd of sept was

Hi, I think this is one area that needs to be developed. I am curently implementing a system for my home so cannot really justify the cost of financially supporting the development of this when all I really need to do is buy a telephone extension lead for my existing fax modem!!! I am more than willing to devote some testing/documentation time (I am not really a programmer) if that helps.

Hi All, I know that this may not strictly be an asterisk issue, but if anyone has any ideas on this prob it would be appreciated. I have a working asterisk setup using Suse 9.1, a BT ISDN BRI card (Fritz?), sipura 3000 and a few cisco 7940's. I wanted to do add faxing into the equation, so I thought I would try and setup the following: PSTN->asterisk->hylafax->pc At the moment

Hi All I have recently downloaded Asterisk and was so impressed I thought I would setup a home server and I went out and got myself a couple of cisco 7940's. (and a sipaura 3000!). thanks to various posts on this list and the voip-info site I have managed to get chan_sccp setup and working with the 7940's but the I tried to get the messages, services and softkeys working. It seems

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

Hi All, Here at my office we have two basic ISDN Access with two phone lines each. We would like to install an Asterisk PBX. The question is: How can I connect the ISDN lines to Asterisk? Is it possible to connect to a DIGIUM Wildcard TE410P card? Or this E1 card is only for PRI access? Any other suggested and tested hardware for a production box? Let me know, -Z --

When I installed my first home-PBX three years ago, I was looking at "cellsockets" -- devices which will accept certain cellular phones and provide an RJ11 jack, generating the ring-voltage and recognizing DTMF, which in turn makes your cell-phone look like a CO line. Pretty cool stuff, in theory, but it just didn't seem to be worth the cost, especially since it locks you to a

Has anyone else had issues with upgrading from SIP 2.2 to SIP 4.4 on the Cisco 7940? I'm following the directions outlined by Cisco. Is there a trick that I'm missing? Clues welcome.

Hi All, Has anyone had experiences with Asterisk and ISDN Gateways or cards? I am looking to setup a home phone system using asterisk and am looking to convert my two existing no's to a single isdn2e line. I was wandering if anyone could recommend which is better to use with asterisk - ISDN Card or gateway? also which brands are best with linux/asterisk? I have used eicon BRI cards for

Hi All, I'd really like to see a show of hands with regard to people's experience with FXO interfaces. I own a few X100p cards and have had nothing but problems with them. I also took part in Sipura's beta program, for the SPA-3000. While it can be an improvement over the X100p, it presently has echo problems that make it unusable. Sipura has not acknowledged the problem ( at least

I have tried sjphone - worked well, although I think my 3 year old IPAQ had a bit of a hard time keeping up with the pace as there was quite a delay in the speech. Probably says more about my ancient IPAQ than SJPhone. Sam Lex Lethol <lethol@gmail.com> wrote on 23/09/2004 15:31:39: > I tried the xten one and didn;t like at all.. > > Havent tried to SJPhone, but my guess is

Hi all, Has anyone had any experience getting asterisk to work with legacy phones? I have been trying to get some of our exisiting Plessey PKS2 (Masterline) Keystation phones to work with asterisk. They are 4 wire extensions (2 for voice and 2 for data) I have connected a test phone to the asterisk server via a digium 400tdm and it kinda works in that if I lift the receiver I hear dialtone

Good day everyone, I have Asterisk and Mitel 3300 ICP communicating via SIP. Calls to and from extensions on both sides are completing successfully (details on config coming soon). Problem is that calls from Asterisk to PSTN via E1 on Mitel 3300 ICP are rejected. What do I need to do to get Asterisk to route PSTN calls through it successfully? Here is an extract of the log on Asterisk whenever I

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either

Is anybody using Mitel phones? It appears that when you page a Mitel phone using asterisk's MeetMe, the paged phone will hang up the call its on to take the page. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110621/764a6fa9/attachment.htm>

Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system to work with *? I'm not getting inbound or outbound calls to work. (Inbound caller gets line busy tone.) SETTINGS FROM MITEL: I built a Crossover cable and connected it like this: PSTN--T1--ASTRISK--T1--OLD MITEL -Crossover Cable Pin-out: 1 - 4 2 - 5

Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows. Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card. All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card. Any advice would be great. Zaptel.conf span=1,0,1,d4,ami e&m=1-23 dchan=24

I have a small government department that wants me to implement a Asterisk installation, however, they connect to the Government PBX, a Mitel SX200, and want to keep the ability to do that. I know there is no chance to connect the digital extension lines, but would it be possible to have the pbx admins send analogue extensions over and have those lines interface through an FXO interface? Or

I have an Asterisk box, 1.4.30 with a PRI. A Mitel 3300 is connected to the Asterisk box via SIP trunking. When a user calls from the Mitel through the Asterisk box the user can speak but can not hear the far end. But - when I route the Mitel user to echo() it works, send and receive. The Mitel user also can record and playback greetings. One thing I have noticed is that when the Mitel user

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---