Displaying 20 results from an estimated 1000 matches similar to: "Source for MD3200 modem cards?"
2005 Mar 26
3
Asterisk with Winmodem
I've read that it is possible to setup * using a winmodem (linmodem). I was wondering if anyone on the list has setup * with a winmodem and if so how they did it. I have a pctel modem (pct789) I'd like to play with.
Thanks for your help
Jared
2012 Jan 06
3
ZFS + Dell MD1200's - MD3200 necessary?
We are looking at building a storage platform based on Dell HW + ZFS
(likely Nexenta).
Going Dell because they can provide solid HW support globally.
Are any of you using the MD1200 JBOD with head units *without* an
MD3200 in front? We are being told that the MD1200''s won''t "daisy
chain" unless the MD3200 is involved.
We would be looking to use some sort of
2004 Jul 21
1
Digium card x100p
hi, i've a question. is it possible to buy digium x100p card from italy
in some store (also online) without ordering it from USA?
on more, did anyone buy a modem with intel chipset 537 or md3200 and where
(in italy)?
Thanks
__________________________________________________________________
Tiscali ADSL Senza Canone, paga solo quello che consumi!
Non perdere la promozione valida fino al 27
2006 May 02
1
Need help configuring TE100P and 3 X100Pclonewith MD3200 chipset
This is a system for our lab. I have no problem getting rid of X100P
clones. But I am just curious why can they work. Even the drivers are
not loading correctly.
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kerry
Garrison
Sent: Tuesday, May 02, 2006 10:51 AM
To: 'Asterisk Users Mailing List -
2007 Aug 08
4
How to use a modem under CentOS
I have a modem in my system that comes up with this in lspci:
01:07.0 Communication controller: Agere Systems 56k WinModem (rev 01)
What programs under CentOS, if any, can use this modem and how?
Thanks.
mhr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20070807/fbeb461b/attachment-0001.html>
2005 Feb 01
3
X100P Clone
I'm new to asterisk and fror a cupple of days I heave been googleing the
net for digium "clones", because it's very hard for me to get a digium
card (X100P).
Does anyone Know another substitute for X100P (I know that intel based
modem with chip 537/MD3200 is working but I did not find any of those) ?
I made it work with an Intel 536 (with a costumised driver that I found
on
2005 Jan 10
4
Generic modem question
Does asterisk support the intel 537/md3200 chipset? I don't want to start
any flames here, I know all about using generic crap in asterisk,[*] which
I really don't approve of other than for testing, but I have a customer
demanding a generic chipset for his one backup analog line. He will not
spend the money for a Digium card and says he will find another
company if I can not provide a
2004 Dec 22
3
E1 card for Asterisk
Hello Folks,
I'm trying to decide here between a few cards for connecting an Asterisk box to a
single E1 channel (either PRI or R2 signaling):
- Digium E100P: has been replaced by the TE110P below, but can still be had at
places like digitnetworks.com for $475, and I guess there's always a place for
good-olde-obsolete cards in the world as long as they work :-)
- Digium TE110P:
2005 May 18
0
Asterisk with Intel modems 537 or MD3200
I've just give a look to the website
http://www.voip-info.org/wiki-Asterisk+Hardware
If I understand very well, the Intel modems marked with 537 or MD3200 chipset should work with Asterisk ?!
If it is true, I'd like to know how to configure Asterisk ?
Thanks a lot.
---------------------------------
D?couvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails,
2004 Jun 07
3
meetme application
Hi there,
I know this question is kind of stupid. But, I don't know anywhere
else to ask. I've received some answers when I asked about the need of having
a zaptel interface to make the meetme application work, that said that it was
better to have a real hardware then the zaptelrtc software modules.
So, my question is, would any of the following cards work with the meetme
2005 Aug 09
2
X100P Wildcard - Hassle free clone?
Now that the X100P is no longer being offered by Digium, what is the
best solution? I seem to have run into a few posts where people talk
about problems they've had with their X100P clone cards (dropping
calls, echos, etc) other people seem to not have any problems.
Of the three chipsets that will work: Intel 537EP, Ambient MD3200, and
Motorola 62802 (as seen here
2005 Feb 06
0
Intel 537EP is NOT the MD3200 aka X100P [Re: Intel 537EP chipset, revisited]
It seems the information out there on this topic was confusing enough to
cause me to waste a lot of time, and that this topic is rehashed
periodically. So now it's my turn....
I had a modem with an Intel 537EP chip on it and thought it might work
with the zaptel drivers. Initially, it seemed the only issue would be
the PCI device & vendor codes. Then, I ran into the problem that
2007 Dec 01
2
Slightly OT: Conexant fax/modem not faxing with sendfax
On Nov 30, 2007 6:35 PM, Kingsly John <member+centos at kingsly.net> wrote:
>
> What you have isn't a "real" modem .. it's just a winmodem that is usable
> under linux. "real" modems don't need drivers to work.
>
> 11/30 00:31:52 dem mdm_command: string 'AT+FCLASS=2.0'
> 11/30 00:31:52 dem mdm_command: string 'ERROR' ->
2004 Jan 21
11
Digium X100P for $43
Digium X100P / new cards are is available on ebay for $43.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309
<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3073050567&category=3309
>
Hope this helps to who want to play with X100P! Are these being sold by
Digium ? I don't know ??
- SamW
-------------- next part --------------
An HTML
2004 Apr 16
1
Windows Drivers for Wildcard FXO Card
And if you want to use it with windows telephony software, such as
answering machine or modem communications software, you can probably
take the drivers for the Intel MD3200 based modem, modify the .inf for
the Digium vendor and device ID.
I have not tried this, but since the MD3200 modem works that way in
Linux, the X100P may work that way in Windows. Then you would have a
$100 winmodem! Let
2006 May 02
3
Need help configuring TE100P and 3 X100P clone with MD3200 chipset
I can either get the TE100P working or the 3 X100P clones working, but
never both. I have the TE100P connected to a channel bank, and X100P
clones to lines from the phone company.
This is my zaptel.conf
span=1,1,0,d4,ami
fxsks=1-24
loadzone=us
fxols=25-27
loadzone=us
I then do
[root@asterix root]# modprobe zaptel
[root@asterix root]# modprobe wcte11xp
ZT_CHANCONFIG failed on channel
2006 May 02
0
Need help configuring TE100P and 3 X100P clonewith MD3200 chipset
Hmm, I don't have /etc/modprobe.conf, and wctdm is giving me problems.
Which device is it talking about?
[root@asterix /]# modprobe wctdm
/lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
2006 Oct 31
1
+Ura +md3200 nao encaminha ligacao
Salve Salve Galera.
Tenho a seguinte situacao:
Uma placa MD3200 ligada em uma linha telefonica comum(PTSN) e
funcionando "belezinha"...
Tenho configurado um URA, onde ele atende a ligacao que chegou no
canal e solicita o numero do ramal de destino da liga??o:
Acontece que ao discar o ramal de destino, ele nao encaminha a
ligacao, ficando mudo e posteriormente caindo a liga?ao.
Fiz
2004 Jun 10
1
Intel 537EP chipset, revisited
Hello everyone.
I hope that this isn't a sore topic, but I've spent a week now reading
through everything I could dig up from the archives on this topic, and
I'm not yet satisfied with any conclusions presented there. I've also
spent a few days hacking on the Asterisk code, trying to understand how
things work better, and I'm still not ready to give up. I well-realize