similar to: Swissv oice IP10 behind NAT

Hi there, tonight I upgraded one of my ip10 phones to "Appli 1.0.0 build 3" with "Boot 0.3.6" This firmware is dated Dec.19, 2003. For Robert (aka "info lists") this fixed the multiplied digits problem (which I never had). Since there is no website of Swissvoice I guess you'll have to e-mail them if you want upgrade... Unfortunately the upgrade did

I am installing a used DG104S.... I got it to ring from gnophone, but all I got was fast busies. so I upgraded based on Pavel's link: ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip So I now have: PROM Version: 3.0B22-D RUNTIME Version: 3.0B44-D But when I pick the phone up I get: ggdbg>000001604 DIM: 0 DSP ERROR: Reason= DIM ERROR: State Timeout 000001604 DIM:

taken from bug 881 (now resolved) :-( ---------------------------------------------------------------------- markster - 05-19-2004 09:21 CDT ---------------------------------------------------------------------- As it turns out the 10S cannot conference on the device. From Jean-Francois at Swissvoice: Hi Mark, IP10S have not the capabilities to mix by itself 2 RTP flows, that why it refuses

Hi there, here some questions and experiences after playing for one day with 3 Swissvoice ip10s and the latest * CVS: QUESTIONS: - what is the user option "enter voice mail number" good for? It doesn't appear to be of any practical use - does anyone have some Swissvoice info that I cannot find on their web site like the guide to MGCP XML (.svd), guide to configuration file

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

Has anyone had success getting the Swiss IP10S and the SIP ( IP10 SP v0.0.1 (Build 4)) firmware working with Asterisk? If so do you have copies of what worked in sip.conf and phone configuration files? I can't seem to get the phone to register, it tries but is denied with a Forbidden (which I am guessing is authentication). I tried without a secret, but the phone seems to use swissvoice

Hi, Does anybody know the place to download the firmware for swissvoice ip10s I have several phones with application IP10 H3 v1.0.0 (Build 1) I'm looking for newer H.323 and also MGCP firmwares Are the SIP firmware available, according to web its targeted to Q1 2004, but we have week left in Q2 I sent several email to swissvoice support,, no answers Regards Juri

I had the telnet window to the phone open by chance and noticed this line twice when I tried to call the IP10: WARNING: may need to undo rtp port operation here The warning line appeared immediately when I picked up the handset. I have no idea what this means. I also tried calling the phone from a POTS phone and I got the same warning. What is even better is that this coincides with the

hallo, does anybody successfully managed to get swissvoice ip10s with h323 firmware work with asterisk ? mgcp firmware works fine, but with h323 i'm still getting one way audio. regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/

I have set up a new SwissVoice phone and it can receive calls but I cannot make calls out from it. The setup is simple for now, 2 phones: SwissVoice is ext 7726 and Cisco 7960 (SIP) is ext 7999. I can call from the Cisco phone and it rings on the SwissVoice phone but when I dial from the SwissVoice phone I get a busy tone upon dialing the second digit. The log reads as follows: -- Endpoint

Hello, I registered at Wiki but can't post on it. So, I just registered on this mailing list, just to request a new fonctionnality in HDT : - Adding a simple benchmark test, like https://cpubenchmark.net/cpu_list.php. It's useful to determine which distro/desktop I can install on an old computer. PS : I asked Linux Mint to add HDT to their ISO and they done it (since Linux Mint 19.3).

Hi Everyboy ! I read that LVM2 is not cluster aware (specially with OCFS2) from different post on internet forum... If it's true, could someone could confirm this information and point me where i can find this affirmation in documentation ? I do some test with OCFS2 on LVM2 and it's seems to run correctly , so i have some interrogation about this fact ! If it's true that LVM2 are

I just installed the new R 0.65.1 The fonctionnality to upgrade and install packages is a very great idea. But the file PACKAGES at http://www.ci.tuwien.ac.at:80/R/src/contrib/ is outdated : 3 of the 4 packages i try to install failed with a 404 not found : the package version are newer than the entry in the PACKAGES file : survival4 survival4_1.4-0.tar.gz Version: 1.1-0 rpart rpart_1.0-7.tar.gz

Hello R Gurus, I have a matrix for which I am doing a heatmap using heatmap.2. I want to put the rownames on the lefthand side instead of the right side of the heatmap. how can i put the rownames on left hand side: I have already tried axis but could not make it work ccc<-structure(c(1, 0.283300333755851, 0.237863231117007, 0.0148696794159253, -0.0780756406815149, -0.106161465097659,

Hello I have a problem with my MGCP voice gateway. I use D-Link DG104S Boot PROM Version 3.0B38-D Firmware Version 3.0T86-D I tried asterisk v 0.7.2 and I am using latest CVS version now. When I dial a number very fast, or when I use a redial function, my asterisk receives coupled digits. My co-worker called number 245005111, these are a few lines of my debug. The identifier of first digit

HDT is kind of discontinued... I didn't had time to work on it since a couple of years. It lacks of many updates to be considered valid on recent systems. That said, adding a kind of bogomips to the report could have been an idea yes. But adding a full-featured benchmark was kind out of the scope of HDT. There is already plenty of tools doing that perfectly. Le mar. 17 d?c. 2019 ? 10:10,

Hi, I would like to know if it is possible to change the IP address of a Samba NT4 PDC? So far I could only find the guide regarding Samba AD DCs. What do I need to take into account, and what are the general steps apart from re-configuring networking? Thank you very much, Benjamin

Hi there, from my logfile (with Swissvoice ip10 phones): WARNING[23575]: chan_mgcp.c:847 mgcp_indicate: Don't know how to indicate condition 14 Anyone has a clue as to what this means? Cheers, Philipp

I've two net2phone MAX IP10 with propietary net2phone firmware loaded and want to use with my Asterisk box.<BR><BR>I know that is possible to change the firmware to enable the SIP features on this phones. Any one knows where to get the firmware?<BR><BR>You can check the phone features at:<BR><A

To this point, whenever I've plugged a storage device (flash drive, mp3 player) into a USB plug, it's magically mounted and I get an icon on my desktop. I've just got a card reader and it doesn't automount. I can mount it manually with "mount /dev/sdb1 /mnt/temp" and that works fine. I would prefer to have it automount and give me the desktop icon. Unfortunately, I