Hi, Is there a way to use swissvoice IP10 in MGCP mode behind NAT. I already use this fonctionnality with a PBX other then asterisk, and it work very well. In fact, I need to use this settings in the IP10 telnet session set xgcp rgw_name MAC_ADDR set tcid 0 notify_entity ca@[@IP PBX]:2427 In fact, the phone register with the MAC@ and not with the IP@, and the PBX reply the phone in the UDP or TCP open channel on the router or on the firewall. A channel is always open by the phone, so there is no problem. Is this fonctionnality possible with asterisk? If not yet, is it planned? Thanks. Fred.
Hello, I am having trouble registering a SIP telephone Zyxel Prestige 2000W to my Asterisk PBX. I am rather confident that Asterisk is working as there are other H323 telephones working fine and a couple of SJPhones working correctly. I keep getting: Jun 24 10:31:08 NOTICE[-1254138960]: chan_sip.c:6742 handle_request: Registration from '<sip:898@10.10.3.5;user=phone>' failed for '10.10.3.82' while my sip.conf has a section like this [898] type=friend username=phone secret=rombo callerid="Portatile SIP" <898> host=dynamic canreinvite=no disallow=all allow=gsm allow=ulaw allow=alaw context=sip I even tried without the username=, but I get the same message. Anybody can help me? Thanks l. -- Creato con M2, il rivoluzionario client e-mail di Opera: http://www.opera.com/m2/