similar to: Using Asterix and Hylafax with Eicon DIVA E1

Hi Guys Just wondering if you can help me and give me some pointers on what could be wrong in my setup. Everything seems to be installed. I have Asterisk 1.2.12.1 FreePBX 1.2.3 IAXModem 0.1.15 Chan_capi 0.7.0 The IAXmodem registers, faxgetty is starting in /var/log/messages but it just doesn't seem to pickup the call. In Chan_capi it says fax detected but no fax

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

We're having some difficulty connecting a T1 fax board card to asterisk, with E&M Wink. We've successfully connected it to other E&M Wink T1s, but have been unable to get asterisk to hear it's dialing. Asterisk can dial down to it with no problem, and it hears all the digits, but whenever it sends digits down to asterisk, * always only "gets" the first one. This is

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

Hi, does anyone have any recommended (read tried and tested) way of making asterisk be able to handle incoming faxes. I've a PC running asterisk with a digium E1 card in and simply want to be able to route a call to some application which will take a fax call and save the fax as an image. I guess the bits I'm unsure of are how to terminate a fax call without a modem (if this is

Hi, Anbody having "Agile Web Development with Rails" soft copy please send me sansflair-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Thanks and Regards, San -- Posted via http://www.ruby-forum.com/. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to this group,

Folks, I've been following recent discussions regarding echo and echo training with much interest, since it's a problem we've never been able to eliminate here. We're facing two challenges presently, and they may be related (or not): a) Cisco 7960s in the office here echo back to our staff, but the customer hears decent sound. b) We've yet to be able to pass faxes through

Hi Guys, I know no doubt this has been covered on the list a zillion time before, but can anyone point me to some good resources on using Asterix as a VoIP gateway? I would like to get two TDM400P cards in two machines attached to separate adsl connections (in two different physical locations). I'd then like to be able to plug POTS telephones into each of them (I understand I will need FXS

Hi, I've been having some problems with my internet connection, it cuts out for aprox 30 seconds at a time and after that i have to do a reload in asterix for it to re-register my sip account with broadvoice otherwise it won't accept any connection till i reload, is there a way for it to automatically re-register or am I missing something else ? Thx. Armand

New to Asterix and perhaps someone can help. The plnned configuration is that the Quintums are to register to the Asterix and the signalling to be handled by the Asterix but the media (G 729 code) to be directed to the service provider. Thanks Shaun

I just installed the new version of SJPhone and it appears that it cannot work with * anymore? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040111/25c910bb/attachment.htm

T.38 is often put forward as the solution for reliable FAX over VOIP. Just wondering for anyone using T.38 (with any equipment), how well does it work as compared to a FAX PSTN call? Thanks. Jim James H. Thompson jht@lj.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041129/3ea08b2c/attachment.htm

Hello, I just received a couple SX440isdn phones and was wondering if they can be plugged into a Diva 4BRI port in NT mode and work with asterisk+chan_capi? I know they probably work fine with mutliHFC cards with either bristuff of chan_misdn but since I have some spare Divas, I was curious about their potential as phone ports. The Diva's 3 and 4 ports are already set to NT mode at boot

Hello, just recently I totally dumped my windows totally. Now I would like to install a few games for my boys with wine. I'm a newby to wine (generally I'm really satisfied with Linux alone), so - where can I get help in general, and for the two games in the subject line especially? Thank you in advance for any help, Martin --

Hi All, I have an Asterisk IP-PABX which I need to make the H323 channel up with an SBC (ACME). Does anybody have any example configuration guide for this? I am really really new with Asterisk, well PABX in general. So any help will be really appreciated. Thanks in advance. Kr, Sema ARCA -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everybody !!! I'm a french student working on an Asterisk's projet . I think it's very easy for you : configure 2 CISCO 7910 and Asterisk in order to make call between both. (Scuse for my poor english ;) ) I have install Debian and Asterisk thanks to the CD Xorcom Rapid. I have set-up DHCP and TFTP servers for the IP phones. On the tftp, i have put the *.bin files for my phone,

Dear all, I just installed asterixnow, but no graphical interface start automaticaly neither linux nor some other, just command line. Shall I do something or shall I install something more ? Many Thanks in advance for any help. Giancarlo -------------- next part -------------- An HTML attachment was scrubbed... URL:

I want to add a server of VoIP under my server, but I don't have de doawnload and i don't have the tutotrial. please help me -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20081022/47da91cd/attachment-0003.html>

Hello, I'm attempting to get Asterisk running for the first time in my company. As I've never used it before, I am creating a small testbed with which to learn Asterisk and get the kinks worked out before attempting to roll it out. I have * compiled and running, and built the sample config files as suggested by the Wiki. I got my Snom 190 configured to use DHCP, and have created an

Hi , I am a newbie with Asterix and not sure if Asterix is a right tool for my needs. Let's suppose this scenario : I have a telephone line in one office( all calls are paid to telephone operator). In other offices I have only internet connections. Is it possible to use Asterix so that I can make telephone calls from ALL offices( without direct telecom connection) ? if so, what telephone