What kind of channelbank/FXS port are you connecting to?
I've seen problems connecting to some of the older versions of the
Adtran Total Access 750's. I wouldn't doubt there would be problems on
other channelbanks with older firmwares. Of course, no firmware on CAC
AB1's
I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P
card, and it worked fine on the first try with current CVS.
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Monday, December 29, 2003 10:09 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Update.
As I mentioned in my first post (below), I had managed to get the phone
to
accept a download from asterisk, but it still said PLEASE PROGRAM ME
after
the download was completed. After further investigation it does appear I
downloaded SOMETHING to the phone, because if I select the services
button
on the front of the phone, I get into a menu that says:
Services> Asterisk PBX
Asterisk slot 2
<available>
<available>
If I select the first one in the list, the phone does change from PLEASE
PROGRAM ME to "** Asterisk PBX**" and there's a VMail softkey!!
However,
if
I pick up the handset and replace it, I'm back to "PLEASE PROGRAM
ME"
again.
Is this normal?
My second problem is that when I dial voicemail from this handset now,
which
is ADSI-enabled, I see the following message on the text screen:
Comedian Mail
(C) 2002 LSS, Inc.
Downloading Scripts
I don't see any activity on the console in terms of logging, and I don't
see
any way to elevate ADSI logging. Within less than a second, I see:
Comedian Mail
download refused.
Services is full
At this point the voicemail's welcome script plays and the display
changes
to:
Comedian Mail
(C) 2002 LSS, Inc.
Load Cancelled
ADSI Unavailable
at this point voicemail's works like it used to before ADSI.
Is any of this ringing any bells with anyone? Any tips appreciated ...
I've
looked around but I'm really not finding any documentation on how to
make
this work.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Darren Nickerson" <darren.nickerson@ifax.com>
To: <asterisk-users@lists.digium.com>
Sent: Monday, December 29, 2003 8:12 PM
Subject: [Asterisk-Users] Programming an unlocked ADSI phone?
> Folks,
>
> I have an Astra 480 that was delivered without any programming. On the
main> LCD, it says:
>
> PLEASE PROGRAM ME
> Asterisk
>
> I thought I would program it, so I added adsi=yes for this extension
to> zapata.conf, and then I created an extension:
>
> ;;
> ;; Temp hack for programming phones
> ;;
> exten => 998,1,ADSIProg(asterisk.adsi)
> exten => 998,2,Hangup
>
> Dialing 998 from the phone worked - the phone said a download was
available> and asked me to accept, which I did. I saw:
>
> Connected to Asterisk CVS-12/17/03-02:39:14 currently running on
testbed> (pid = 31583)
> -- Starting simple switch on 'Zap/5-1'
> -- Executing ADSIProg("Zap/5-1", "asterisk.adsi")
in new stack
> -- ADSI Available on CPE. Attempting Upload.
> -- Executing Hangup("Zap/5-1", "") in new stack
> == Spawn extension (default, 998, 2) exited non-zero on 'Zap/5-1'
> -- Hungup 'Zap/5-1'
> -- Starting simple switch on 'Zap/5-1'
> -- Hungup 'Zap/5-1'
>
> When it's done and asterisk hangs up though, my phone seems unchanged.
Still> asks to be programmed.
>
> I can't seem to find a how-to on the wiki, or in the PDF. Looks like
an> addition might make sense, and I'd be glad to help if I could get this
> sorted out. Am I missing something obvious?
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
Darren Nickerson
2003-Dec-30 14:18 UTC
[Asterisk-Users] Programming an unlocked ADSI phone?
Thanks for the reply Tim - I was beginning to think nobody used this stuff
;-)
As you can tell, I'm a relative newcomer to ADSI - I'm really not sure
what
to expect once the phone gets programmed, but I would not expect to see
(PLEASE PROGRAM ME) still, and I would have hoped it would not have broken
voicemail so readily.
I'm not using a channel bank at all ... I have a very simple setup using two
x100p FXO cards and one TDM400P FXS card.
As I mentioned below it does appear that SOMETHING was loaded into the
phone, and it does appear to at least TRY to use ADSI when accessing
voicemail.
It's odd ... it's like everything worked but I'm left saying ...
okayyyyy,
now what? The phone isn't incredibly functional at this point - even if I do
go into the services menu and select 'Asterisk PBX' this selection only
persists until I use the phone once. Also, there aren't soft keys for
anything useful like transferring a call ... how WOULD one do that with this
phone anyway?
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Tim Thompson" <tthompson@amatechtel.com>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, December 30, 2003 3:48 PM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
What kind of channelbank/FXS port are you connecting to?
I've seen problems connecting to some of the older versions of the
Adtran Total Access 750's. I wouldn't doubt there would be problems on
other channelbanks with older firmwares. Of course, no firmware on CAC
AB1's
I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P
card, and it worked fine on the first try with current CVS.
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Monday, December 29, 2003 10:09 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Update.
As I mentioned in my first post (below), I had managed to get the phone
to
accept a download from asterisk, but it still said PLEASE PROGRAM ME
after
the download was completed. After further investigation it does appear I
downloaded SOMETHING to the phone, because if I select the services
button
on the front of the phone, I get into a menu that says:
Services> Asterisk PBX
Asterisk slot 2
<available>
<available>
If I select the first one in the list, the phone does change from PLEASE
PROGRAM ME to "** Asterisk PBX**" and there's a VMail softkey!!
However,
if
I pick up the handset and replace it, I'm back to "PLEASE PROGRAM
ME"
again.
Is this normal?
My second problem is that when I dial voicemail from this handset now,
which
is ADSI-enabled, I see the following message on the text screen:
Comedian Mail
(C) 2002 LSS, Inc.
Downloading Scripts
I don't see any activity on the console in terms of logging, and I don't
see
any way to elevate ADSI logging. Within less than a second, I see:
Comedian Mail
download refused.
Services is full
At this point the voicemail's welcome script plays and the display
changes
to:
Comedian Mail
(C) 2002 LSS, Inc.
Load Cancelled
ADSI Unavailable
at this point voicemail's works like it used to before ADSI.
Is any of this ringing any bells with anyone? Any tips appreciated ...
I've
looked around but I'm really not finding any documentation on how to
make
this work.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Darren Nickerson" <darren.nickerson@ifax.com>
To: <asterisk-users@lists.digium.com>
Sent: Monday, December 29, 2003 8:12 PM
Subject: [Asterisk-Users] Programming an unlocked ADSI phone?
> Folks,
>
> I have an Astra 480 that was delivered without any programming. On the
main> LCD, it says:
>
> PLEASE PROGRAM ME
> Asterisk
>
> I thought I would program it, so I added adsi=yes for this extension
to> zapata.conf, and then I created an extension:
>
> ;;
> ;; Temp hack for programming phones
> ;;
> exten => 998,1,ADSIProg(asterisk.adsi)
> exten => 998,2,Hangup
>
> Dialing 998 from the phone worked - the phone said a download was
available> and asked me to accept, which I did. I saw:
>
> Connected to Asterisk CVS-12/17/03-02:39:14 currently running on
testbed> (pid = 31583)
> -- Starting simple switch on 'Zap/5-1'
> -- Executing ADSIProg("Zap/5-1", "asterisk.adsi")
in new stack
> -- ADSI Available on CPE. Attempting Upload.
> -- Executing Hangup("Zap/5-1", "") in new stack
> == Spawn extension (default, 998, 2) exited non-zero on 'Zap/5-1'
> -- Hungup 'Zap/5-1'
> -- Starting simple switch on 'Zap/5-1'
> -- Hungup 'Zap/5-1'
>
> When it's done and asterisk hangs up though, my phone seems unchanged.
Still> asks to be programmed.
>
> I can't seem to find a how-to on the wiki, or in the PDF. Looks like
an> addition might make sense, and I'd be glad to help if I could get this
> sorted out. Am I missing something obvious?
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
When you push your services button, are there any "<available>"
slots.
If not, delete the 3rd or 4th ones....
Don't know if it matters, but I have:
Comedian Mail
Asterisk PBX
<available>
<Aastra SL>
The only "selectable" ones are the Comedian Mail and the Asterisk PBX.
You might try deleting them all and reloading.
And "#" is the Transfer button. 8-)
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Tuesday, December 30, 2003 9:29 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Update #2
According to the helpful folks at Sayson, this phone actually has two
'slots', and the ADSI stuff needs to be downloaded to both (the second
one
kicks in when the phone is idle for more than 1s). I had only
downloaded
asterisk.adsi to the first slot, which explains why I was seeing the
default
(PLEASE PROGRAM ME) triggered from slot 2. I downloaded to the second
slot
and all is well now ... at least the phone now identifies itself as I
asked
it to, and seems to be programmed ;-)
It seems to me that asterisk.adsi is pretty vanilla - not much
functionality. Has anyone built a better mousetrap that they'd care to
share?
My second problem remains ... when I connect to voicemail now I see:
Comedian Mail
download refused
Services is full
but I don't see any errors in Asterisk's console. What's up with
that???
I am now seeing some really cool functionality once I get past this
point.
As I'm checking voicemail by navigating the menus, I see stuff like:
>Old Messages
Message 1 of 5
Unknown
Tue Dec 23 07:46:02
Sweet!
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Darren Nickerson" <darren.nickerson@ifax.com>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, December 30, 2003 4:18 PM
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
> Thanks for the reply Tim - I was beginning to think nobody used this
stuff> ;-)
>
> As you can tell, I'm a relative newcomer to ADSI - I'm really not
sure
what> to expect once the phone gets programmed, but I would not expect to
see> (PLEASE PROGRAM ME) still, and I would have hoped it would not have
broken> voicemail so readily.
>
> I'm not using a channel bank at all ... I have a very simple setup
using
two> x100p FXO cards and one TDM400P FXS card.
>
> As I mentioned below it does appear that SOMETHING was loaded into the
> phone, and it does appear to at least TRY to use ADSI when accessing
> voicemail.
>
> It's odd ... it's like everything worked but I'm left saying
...
okayyyyy,> now what? The phone isn't incredibly functional at this point - even
if I
do> go into the services menu and select 'Asterisk PBX' this selection
only> persists until I use the phone once. Also, there aren't soft keys for
> anything useful like transferring a call ... how WOULD one do that
with
this> phone anyway?
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
> ----- Original Message -----
> From: "Tim Thompson" <tthompson@amatechtel.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Tuesday, December 30, 2003 3:48 PM
> Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> What kind of channelbank/FXS port are you connecting to?
>
>
> I've seen problems connecting to some of the older versions of the
> Adtran Total Access 750's. I wouldn't doubt there would be
problems
on> other channelbanks with older firmwares. Of course, no firmware on
CAC> AB1's
>
>
> I have the AAstra 480, Adtran 750 Channelbank (updated firmware),
T100P> card, and it worked fine on the first try with current CVS.
>
> Tim Thompson
> Commercial Sales Engineer
> http://www.amatechtel.com
> (806) 722-2227
>
>
> -----Original Message-----
> From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
> Sent: Monday, December 29, 2003 10:09 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
>
> Update.
>
> As I mentioned in my first post (below), I had managed to get the
phone> to
> accept a download from asterisk, but it still said PLEASE PROGRAM ME
> after
> the download was completed. After further investigation it does appear
I> downloaded SOMETHING to the phone, because if I select the services
> button
> on the front of the phone, I get into a menu that says:
>
> Services
> > Asterisk PBX
> Asterisk slot 2
> <available>
> <available>
>
> If I select the first one in the list, the phone does change from
PLEASE> PROGRAM ME to "** Asterisk PBX**" and there's a VMail
softkey!!
However,> if
> I pick up the handset and replace it, I'm back to "PLEASE PROGRAM
ME"
> again.
> Is this normal?
>
> My second problem is that when I dial voicemail from this handset now,
> which
> is ADSI-enabled, I see the following message on the text screen:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Downloading Scripts
>
> I don't see any activity on the console in terms of logging, and I
don't> see
> any way to elevate ADSI logging. Within less than a second, I see:
>
> Comedian Mail
> download refused.
>
> Services is full
>
> At this point the voicemail's welcome script plays and the display
> changes
> to:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Load Cancelled
> ADSI Unavailable
>
> at this point voicemail's works like it used to before ADSI.
>
> Is any of this ringing any bells with anyone? Any tips appreciated ...
> I've
> looked around but I'm really not finding any documentation on how to
> make
> this work.
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
>
> ----- Original Message -----
> From: "Darren Nickerson" <darren.nickerson@ifax.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Monday, December 29, 2003 8:12 PM
> Subject: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> > Folks,
> >
> > I have an Astra 480 that was delivered without any programming. On
the> main
> > LCD, it says:
> >
> > PLEASE PROGRAM ME
> > Asterisk
> >
> > I thought I would program it, so I added adsi=yes for this extension
> to
> > zapata.conf, and then I created an extension:
> >
> > ;;
> > ;; Temp hack for programming phones
> > ;;
> > exten => 998,1,ADSIProg(asterisk.adsi)
> > exten => 998,2,Hangup
> >
> > Dialing 998 from the phone worked - the phone said a download was
> available
> > and asked me to accept, which I did. I saw:
> >
> > Connected to Asterisk CVS-12/17/03-02:39:14 currently running on
> testbed
> > (pid = 31583)
> > -- Starting simple switch on 'Zap/5-1'
> > -- Executing ADSIProg("Zap/5-1",
"asterisk.adsi") in new stack
> > -- ADSI Available on CPE. Attempting Upload.
> > -- Executing Hangup("Zap/5-1", "") in new
stack
> > == Spawn extension (default, 998, 2) exited non-zero on
'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> > -- Starting simple switch on 'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> >
> > When it's done and asterisk hangs up though, my phone seems
unchanged.> Still
> > asks to be programmed.
> >
> > I can't seem to find a how-to on the wiki, or in the PDF. Looks
like
> an
> > addition might make sense, and I'd be glad to help if I could get
this> > sorted out. Am I missing something obvious?
> >
> > -Darren
> >
> > --
> > Darren Nickerson
> > Senior Sales & Support Engineer
> > iFAX Solutions, Inc. www.ifax.com
> > darren.nickerson@ifax.com
> > +1.215.438.4638 ext 8106 office
> > +1.215.243.8335 fax
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
Andrew Kohlsmith
2003-Dec-31 09:22 UTC
[Asterisk-Users] Programming an unlocked ADSI phone?
> And "#" is the Transfer button. 8-)Any way to map that to a soft button? How do I use # in a call if not? Regards, Andrew
Have you tried deleting those services and adding them back in by
checking voicemail 1st (dial 8500) then dial your 8600 for AdsiProg
You should be able to just hit the "#" during the call, but you will
also have to make sure you have the |Tt defined in your extensions.conf
file as well.
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Wednesday, December 31, 2003 10:02 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Yes, there are 2 available slots. When I push services, I see:
Services> Asterisk PBX
Asterisk PBX
<available>
<available>
As I mentioned, the only soft-key I seem to have is 'VMail', and when I
select that I still get:
Comedial Mail
download refused
Services is full
And yet somehow there does seem to be some ADSI functionality later on,
when
it falls back to a voice prompt after the download is refused and I'm
navigating the voice prompts, reading the messages.
It troubles me that Asterisk isn't very chatty about the ADSI stuff ...
when
I access VMail all I see is:
-- Starting simple switch on 'Zap/5-1'
-- Executing VoiceMailMain("Zap/5-1", "") in new stack
(here's where the ADSI stuff seems to happen on the phone, download
refused etc)
-- Playing 'vm-login' (language 'en')
[snip rest of log]
There's no indication that any ADSI transactions are going on here, but
that
tell-tale tone can be heard and the little rotating animated cursor on
the
phone means _something_ is definitely going on at the ADSI level. Am I
missing a debug option that could show me more about what may be going
wrong?
I'll get with Sayson tech support today to see if they can make any
sense of
this.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Tim Thompson" <tthompson@amatechtel.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, December 31, 2003 9:59 AM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
When you push your services button, are there any "<available>"
slots.
If not, delete the 3rd or 4th ones....
Don't know if it matters, but I have:
Comedian Mail
Asterisk PBX
<available>
<Aastra SL>
The only "selectable" ones are the Comedian Mail and the Asterisk PBX.
You might try deleting them all and reloading.
And "#" is the Transfer button. 8-)
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Tuesday, December 30, 2003 9:29 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Update #2
According to the helpful folks at Sayson, this phone actually has two
'slots', and the ADSI stuff needs to be downloaded to both (the second
one
kicks in when the phone is idle for more than 1s). I had only
downloaded
asterisk.adsi to the first slot, which explains why I was seeing the
default
(PLEASE PROGRAM ME) triggered from slot 2. I downloaded to the second
slot
and all is well now ... at least the phone now identifies itself as I
asked
it to, and seems to be programmed ;-)
It seems to me that asterisk.adsi is pretty vanilla - not much
functionality. Has anyone built a better mousetrap that they'd care to
share?
My second problem remains ... when I connect to voicemail now I see:
Comedian Mail
download refused
Services is full
but I don't see any errors in Asterisk's console. What's up with
that???
I am now seeing some really cool functionality once I get past this
point.
As I'm checking voicemail by navigating the menus, I see stuff like:
>Old Messages
Message 1 of 5
Unknown
Tue Dec 23 07:46:02
Sweet!
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Darren Nickerson" <darren.nickerson@ifax.com>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, December 30, 2003 4:18 PM
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
> Thanks for the reply Tim - I was beginning to think nobody used this
stuff> ;-)
>
> As you can tell, I'm a relative newcomer to ADSI - I'm really not
sure
what> to expect once the phone gets programmed, but I would not expect to
see> (PLEASE PROGRAM ME) still, and I would have hoped it would not have
broken> voicemail so readily.
>
> I'm not using a channel bank at all ... I have a very simple setup
using
two> x100p FXO cards and one TDM400P FXS card.
>
> As I mentioned below it does appear that SOMETHING was loaded into the
> phone, and it does appear to at least TRY to use ADSI when accessing
> voicemail.
>
> It's odd ... it's like everything worked but I'm left saying
...
okayyyyy,> now what? The phone isn't incredibly functional at this point - even
if I
do> go into the services menu and select 'Asterisk PBX' this selection
only> persists until I use the phone once. Also, there aren't soft keys for
> anything useful like transferring a call ... how WOULD one do that
with
this> phone anyway?
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
> ----- Original Message -----
> From: "Tim Thompson" <tthompson@amatechtel.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Tuesday, December 30, 2003 3:48 PM
> Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> What kind of channelbank/FXS port are you connecting to?
>
>
> I've seen problems connecting to some of the older versions of the
> Adtran Total Access 750's. I wouldn't doubt there would be
problems
on> other channelbanks with older firmwares. Of course, no firmware on
CAC> AB1's
>
>
> I have the AAstra 480, Adtran 750 Channelbank (updated firmware),
T100P> card, and it worked fine on the first try with current CVS.
>
> Tim Thompson
> Commercial Sales Engineer
> http://www.amatechtel.com
> (806) 722-2227
>
>
> -----Original Message-----
> From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
> Sent: Monday, December 29, 2003 10:09 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
>
> Update.
>
> As I mentioned in my first post (below), I had managed to get the
phone> to
> accept a download from asterisk, but it still said PLEASE PROGRAM ME
> after
> the download was completed. After further investigation it does appear
I> downloaded SOMETHING to the phone, because if I select the services
> button
> on the front of the phone, I get into a menu that says:
>
> Services
> > Asterisk PBX
> Asterisk slot 2
> <available>
> <available>
>
> If I select the first one in the list, the phone does change from
PLEASE> PROGRAM ME to "** Asterisk PBX**" and there's a VMail
softkey!!
However,> if
> I pick up the handset and replace it, I'm back to "PLEASE PROGRAM
ME"
> again.
> Is this normal?
>
> My second problem is that when I dial voicemail from this handset now,
> which
> is ADSI-enabled, I see the following message on the text screen:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Downloading Scripts
>
> I don't see any activity on the console in terms of logging, and I
don't> see
> any way to elevate ADSI logging. Within less than a second, I see:
>
> Comedian Mail
> download refused.
>
> Services is full
>
> At this point the voicemail's welcome script plays and the display
> changes
> to:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Load Cancelled
> ADSI Unavailable
>
> at this point voicemail's works like it used to before ADSI.
>
> Is any of this ringing any bells with anyone? Any tips appreciated ...
> I've
> looked around but I'm really not finding any documentation on how to
> make
> this work.
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
>
> ----- Original Message -----
> From: "Darren Nickerson" <darren.nickerson@ifax.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Monday, December 29, 2003 8:12 PM
> Subject: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> > Folks,
> >
> > I have an Astra 480 that was delivered without any programming. On
the> main
> > LCD, it says:
> >
> > PLEASE PROGRAM ME
> > Asterisk
> >
> > I thought I would program it, so I added adsi=yes for this extension
> to
> > zapata.conf, and then I created an extension:
> >
> > ;;
> > ;; Temp hack for programming phones
> > ;;
> > exten => 998,1,ADSIProg(asterisk.adsi)
> > exten => 998,2,Hangup
> >
> > Dialing 998 from the phone worked - the phone said a download was
> available
> > and asked me to accept, which I did. I saw:
> >
> > Connected to Asterisk CVS-12/17/03-02:39:14 currently running on
> testbed
> > (pid = 31583)
> > -- Starting simple switch on 'Zap/5-1'
> > -- Executing ADSIProg("Zap/5-1",
"asterisk.adsi") in new stack
> > -- ADSI Available on CPE. Attempting Upload.
> > -- Executing Hangup("Zap/5-1", "") in new
stack
> > == Spawn extension (default, 998, 2) exited non-zero on
'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> > -- Starting simple switch on 'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> >
> > When it's done and asterisk hangs up though, my phone seems
unchanged.> Still
> > asks to be programmed.
> >
> > I can't seem to find a how-to on the wiki, or in the PDF. Looks
like
> an
> > addition might make sense, and I'd be glad to help if I could get
this> > sorted out. Am I missing something obvious?
> >
> > -Darren
> >
> > --
> > Darren Nickerson
> > Senior Sales & Support Engineer
> > iFAX Solutions, Inc. www.ifax.com
> > darren.nickerson@ifax.com
> > +1.215.438.4638 ext 8106 office
> > +1.215.243.8335 fax
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
After looking a litter deeper in the code, it looks as though the
Comedian Mail will only load in the 1st slot of your ADSI phone and the
asterisk loads in the 2nd.
So....if you delete the 1st slot that you had listed as Asterisk, then
dial the 8500 extension it will hopefully work.
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Tim Thompson
Sent: Wednesday, December 31, 2003 1:42 PM
To: asterisk-users@lists.digium.com
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
Have you tried deleting those services and adding them back in by
checking voicemail 1st (dial 8500) then dial your 8600 for AdsiProg
You should be able to just hit the "#" during the call, but you will
also have to make sure you have the |Tt defined in your extensions.conf
file as well.
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Wednesday, December 31, 2003 10:02 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Yes, there are 2 available slots. When I push services, I see:
Services> Asterisk PBX
Asterisk PBX
<available>
<available>
As I mentioned, the only soft-key I seem to have is 'VMail', and when I
select that I still get:
Comedial Mail
download refused
Services is full
And yet somehow there does seem to be some ADSI functionality later on,
when
it falls back to a voice prompt after the download is refused and I'm
navigating the voice prompts, reading the messages.
It troubles me that Asterisk isn't very chatty about the ADSI stuff ...
when
I access VMail all I see is:
-- Starting simple switch on 'Zap/5-1'
-- Executing VoiceMailMain("Zap/5-1", "") in new stack
(here's where the ADSI stuff seems to happen on the phone, download
refused etc)
-- Playing 'vm-login' (language 'en')
[snip rest of log]
There's no indication that any ADSI transactions are going on here, but
that
tell-tale tone can be heard and the little rotating animated cursor on
the
phone means _something_ is definitely going on at the ADSI level. Am I
missing a debug option that could show me more about what may be going
wrong?
I'll get with Sayson tech support today to see if they can make any
sense of
this.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Tim Thompson" <tthompson@amatechtel.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, December 31, 2003 9:59 AM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
When you push your services button, are there any "<available>"
slots.
If not, delete the 3rd or 4th ones....
Don't know if it matters, but I have:
Comedian Mail
Asterisk PBX
<available>
<Aastra SL>
The only "selectable" ones are the Comedian Mail and the Asterisk PBX.
You might try deleting them all and reloading.
And "#" is the Transfer button. 8-)
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Tuesday, December 30, 2003 9:29 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Update #2
According to the helpful folks at Sayson, this phone actually has two
'slots', and the ADSI stuff needs to be downloaded to both (the second
one
kicks in when the phone is idle for more than 1s). I had only
downloaded
asterisk.adsi to the first slot, which explains why I was seeing the
default
(PLEASE PROGRAM ME) triggered from slot 2. I downloaded to the second
slot
and all is well now ... at least the phone now identifies itself as I
asked
it to, and seems to be programmed ;-)
It seems to me that asterisk.adsi is pretty vanilla - not much
functionality. Has anyone built a better mousetrap that they'd care to
share?
My second problem remains ... when I connect to voicemail now I see:
Comedian Mail
download refused
Services is full
but I don't see any errors in Asterisk's console. What's up with
that???
I am now seeing some really cool functionality once I get past this
point.
As I'm checking voicemail by navigating the menus, I see stuff like:
>Old Messages
Message 1 of 5
Unknown
Tue Dec 23 07:46:02
Sweet!
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Darren Nickerson" <darren.nickerson@ifax.com>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, December 30, 2003 4:18 PM
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
> Thanks for the reply Tim - I was beginning to think nobody used this
stuff> ;-)
>
> As you can tell, I'm a relative newcomer to ADSI - I'm really not
sure
what> to expect once the phone gets programmed, but I would not expect to
see> (PLEASE PROGRAM ME) still, and I would have hoped it would not have
broken> voicemail so readily.
>
> I'm not using a channel bank at all ... I have a very simple setup
using
two> x100p FXO cards and one TDM400P FXS card.
>
> As I mentioned below it does appear that SOMETHING was loaded into the
> phone, and it does appear to at least TRY to use ADSI when accessing
> voicemail.
>
> It's odd ... it's like everything worked but I'm left saying
...
okayyyyy,> now what? The phone isn't incredibly functional at this point - even
if I
do> go into the services menu and select 'Asterisk PBX' this selection
only> persists until I use the phone once. Also, there aren't soft keys for
> anything useful like transferring a call ... how WOULD one do that
with
this> phone anyway?
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
> ----- Original Message -----
> From: "Tim Thompson" <tthompson@amatechtel.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Tuesday, December 30, 2003 3:48 PM
> Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> What kind of channelbank/FXS port are you connecting to?
>
>
> I've seen problems connecting to some of the older versions of the
> Adtran Total Access 750's. I wouldn't doubt there would be
problems
on> other channelbanks with older firmwares. Of course, no firmware on
CAC> AB1's
>
>
> I have the AAstra 480, Adtran 750 Channelbank (updated firmware),
T100P> card, and it worked fine on the first try with current CVS.
>
> Tim Thompson
> Commercial Sales Engineer
> http://www.amatechtel.com
> (806) 722-2227
>
>
> -----Original Message-----
> From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
> Sent: Monday, December 29, 2003 10:09 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
>
> Update.
>
> As I mentioned in my first post (below), I had managed to get the
phone> to
> accept a download from asterisk, but it still said PLEASE PROGRAM ME
> after
> the download was completed. After further investigation it does appear
I> downloaded SOMETHING to the phone, because if I select the services
> button
> on the front of the phone, I get into a menu that says:
>
> Services
> > Asterisk PBX
> Asterisk slot 2
> <available>
> <available>
>
> If I select the first one in the list, the phone does change from
PLEASE> PROGRAM ME to "** Asterisk PBX**" and there's a VMail
softkey!!
However,> if
> I pick up the handset and replace it, I'm back to "PLEASE PROGRAM
ME"
> again.
> Is this normal?
>
> My second problem is that when I dial voicemail from this handset now,
> which
> is ADSI-enabled, I see the following message on the text screen:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Downloading Scripts
>
> I don't see any activity on the console in terms of logging, and I
don't> see
> any way to elevate ADSI logging. Within less than a second, I see:
>
> Comedian Mail
> download refused.
>
> Services is full
>
> At this point the voicemail's welcome script plays and the display
> changes
> to:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Load Cancelled
> ADSI Unavailable
>
> at this point voicemail's works like it used to before ADSI.
>
> Is any of this ringing any bells with anyone? Any tips appreciated ...
> I've
> looked around but I'm really not finding any documentation on how to
> make
> this work.
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
>
> ----- Original Message -----
> From: "Darren Nickerson" <darren.nickerson@ifax.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Monday, December 29, 2003 8:12 PM
> Subject: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> > Folks,
> >
> > I have an Astra 480 that was delivered without any programming. On
the> main
> > LCD, it says:
> >
> > PLEASE PROGRAM ME
> > Asterisk
> >
> > I thought I would program it, so I added adsi=yes for this extension
> to
> > zapata.conf, and then I created an extension:
> >
> > ;;
> > ;; Temp hack for programming phones
> > ;;
> > exten => 998,1,ADSIProg(asterisk.adsi)
> > exten => 998,2,Hangup
> >
> > Dialing 998 from the phone worked - the phone said a download was
> available
> > and asked me to accept, which I did. I saw:
> >
> > Connected to Asterisk CVS-12/17/03-02:39:14 currently running on
> testbed
> > (pid = 31583)
> > -- Starting simple switch on 'Zap/5-1'
> > -- Executing ADSIProg("Zap/5-1",
"asterisk.adsi") in new stack
> > -- ADSI Available on CPE. Attempting Upload.
> > -- Executing Hangup("Zap/5-1", "") in new
stack
> > == Spawn extension (default, 998, 2) exited non-zero on
'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> > -- Starting simple switch on 'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> >
> > When it's done and asterisk hangs up though, my phone seems
unchanged.> Still
> > asks to be programmed.
> >
> > I can't seem to find a how-to on the wiki, or in the PDF. Looks
like
> an
> > addition might make sense, and I'd be glad to help if I could get
this> > sorted out. Am I missing something obvious?
> >
> > -Darren
> >
> > --
> > Darren Nickerson
> > Senior Sales & Support Engineer
> > iFAX Solutions, Inc. www.ifax.com
> > darren.nickerson@ifax.com
> > +1.215.438.4638 ext 8106 office
> > +1.215.243.8335 fax
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
I wanted to give you some guidance on the configuration of the phone....
Here is sniplet of configuration Aastra 390 and 480 Phones...
In an ADSI script for the 1st Slot:
;
; Asterisk default ADSI script
;
;
; Begin with the preamble requirements
;
DESCRIPTION "Asterisk PBX" ; Name of vendor
VERSION 0x00 ; Version of stuff
;SECURITY "_AST" ; Security code
SECURITY 0x9BDBF7AC ; Security code
FDN 0x0000000F ; Descriptor number
In an ADSI script for the 2nd Slot:
;
; Asterisk default ADSI script
;
;
; Begin with the preamble requirements
;
DESCRIPTION "Asterisk PBX" ; Name of vendor
VERSION 0x00 ; Version of stuff
;SECURITY "_AST" ; Security code
SECURITY 0x78921D49 ; Security code
FDN 0x85EFD9DA ; Descriptor number
You wouldn't need to program any other slots than these 2, and the 1st
slot is the only one that MUST contain programming. This is because the
first slot is triggered when the phone rings or when the phone is placed
off-hook. The second slot (the Self Launching slot) is triggered when
the phone has had no activity for a certain amount of time. Programming
in this slot can be identical to slot 1, or it can be completely
different, such as for advertising purposes.
How to clear the ADSI Scripts from the phone....
Hit options.
Choose Time/Date
Set the time to Jan 1 12:00am
Hit done
Hit done
Hit options
Hit Mute or Flash
A display giving the CPE ID and other stuff will appear
QUICKLY press the # key
Hope this helps.....
-gcc
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Darren
Nickerson
Posted At: Wednesday, December 31, 2003 2:58 PM
Posted To: Asterisk User Group
Conversation: [Asterisk-Users] Programming an unlocked ADSI phone?
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Tim,
Thanks for your continued participation in this thread.
The truth is, it's not clear to me how to delete a service ... the
services menu only allows me to 'Select' or 'Quit'.
It's also not clear to me how you managed to get Comedian Mail
downloaded to Slot 1 without unlocking it with a code.
When you did the ADSIProg originally (presumably you only did this
once), did you download to both slots, or just the second one?
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Tim Thompson" <tthompson@amatechtel.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, December 31, 2003 2:42 PM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
Have you tried deleting those services and adding them back in by
checking voicemail 1st (dial 8500) then dial your 8600 for AdsiProg
You should be able to just hit the "#" during the call, but you will
also have to make sure you have the |Tt defined in your extensions.conf
file as well.
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Wednesday, December 31, 2003 10:02 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Yes, there are 2 available slots. When I push services, I see:
Services> Asterisk PBX
Asterisk PBX
<available>
<available>
As I mentioned, the only soft-key I seem to have is 'VMail', and when I
select that I still get:
Comedial Mail
download refused
Services is full
And yet somehow there does seem to be some ADSI functionality later on,
when it falls back to a voice prompt after the download is refused and
I'm navigating the voice prompts, reading the messages.
It troubles me that Asterisk isn't very chatty about the ADSI stuff ...
when I access VMail all I see is:
-- Starting simple switch on 'Zap/5-1'
-- Executing VoiceMailMain("Zap/5-1", "") in new stack
(here's where the ADSI stuff seems to happen on the phone, download
refused etc)
-- Playing 'vm-login' (language 'en')
[snip rest of log]
There's no indication that any ADSI transactions are going on here, but
that tell-tale tone can be heard and the little rotating animated cursor
on the phone means _something_ is definitely going on at the ADSI level.
Am I missing a debug option that could show me more about what may be
going wrong?
I'll get with Sayson tech support today to see if they can make any
sense of this.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Tim Thompson" <tthompson@amatechtel.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, December 31, 2003 9:59 AM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
When you push your services button, are there any "<available>"
slots.
If not, delete the 3rd or 4th ones....
Don't know if it matters, but I have:
Comedian Mail
Asterisk PBX
<available>
<Aastra SL>
The only "selectable" ones are the Comedian Mail and the Asterisk PBX.
You might try deleting them all and reloading.
And "#" is the Transfer button. 8-)
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Tuesday, December 30, 2003 9:29 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Update #2
According to the helpful folks at Sayson, this phone actually has two
'slots', and the ADSI stuff needs to be downloaded to both (the second
one kicks in when the phone is idle for more than 1s). I had only
downloaded asterisk.adsi to the first slot, which explains why I was
seeing the default (PLEASE PROGRAM ME) triggered from slot 2. I
downloaded to the second slot and all is well now ... at least the phone
now identifies itself as I asked it to, and seems to be programmed ;-)
It seems to me that asterisk.adsi is pretty vanilla - not much
functionality. Has anyone built a better mousetrap that they'd care to
share?
My second problem remains ... when I connect to voicemail now I see:
Comedian Mail
download refused
Services is full
but I don't see any errors in Asterisk's console. What's up with
that???
I am now seeing some really cool functionality once I get past this
point. As I'm checking voicemail by navigating the menus, I see stuff
like:
>Old Messages
Message 1 of 5
Unknown
Tue Dec 23 07:46:02
Sweet!
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Darren Nickerson" <darren.nickerson@ifax.com>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, December 30, 2003 4:18 PM
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
> Thanks for the reply Tim - I was beginning to think nobody used this
stuff> ;-)
>
> As you can tell, I'm a relative newcomer to ADSI - I'm really not
sure
what> to expect once the phone gets programmed, but I would not expect to
see> (PLEASE PROGRAM ME) still, and I would have hoped it would not have
broken> voicemail so readily.
>
> I'm not using a channel bank at all ... I have a very simple setup
using
two> x100p FXO cards and one TDM400P FXS card.
>
> As I mentioned below it does appear that SOMETHING was loaded into the
> phone, and it does appear to at least TRY to use ADSI when accessing
> voicemail.
>
> It's odd ... it's like everything worked but I'm left saying
...
okayyyyy,> now what? The phone isn't incredibly functional at this point - even
if I
do> go into the services menu and select 'Asterisk PBX' this selection
only> persists until I use the phone once. Also, there aren't soft keys for
> anything useful like transferring a call ... how WOULD one do that
with
this> phone anyway?
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
> ----- Original Message -----
> From: "Tim Thompson" <tthompson@amatechtel.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Tuesday, December 30, 2003 3:48 PM
> Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> What kind of channelbank/FXS port are you connecting to?
>
>
> I've seen problems connecting to some of the older versions of the
> Adtran Total Access 750's. I wouldn't doubt there would be
problems
on> other channelbanks with older firmwares. Of course, no firmware on
CAC> AB1's
>
>
> I have the AAstra 480, Adtran 750 Channelbank (updated firmware),
T100P> card, and it worked fine on the first try with current CVS.
>
> Tim Thompson
> Commercial Sales Engineer
> http://www.amatechtel.com
> (806) 722-2227
>
>
> -----Original Message-----
> From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
> Sent: Monday, December 29, 2003 10:09 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
>
> Update.
>
> As I mentioned in my first post (below), I had managed to get the
phone> to
> accept a download from asterisk, but it still said PLEASE PROGRAM ME
> after the download was completed. After further investigation it does
> appear
I> downloaded SOMETHING to the phone, because if I select the services
> button on the front of the phone, I get into a menu that says:
>
> Services
> > Asterisk PBX
> Asterisk slot 2
> <available>
> <available>
>
> If I select the first one in the list, the phone does change from
PLEASE> PROGRAM ME to "** Asterisk PBX**" and there's a VMail
softkey!!
However,> if
> I pick up the handset and replace it, I'm back to "PLEASE PROGRAM
ME"
> again. Is this normal?
>
> My second problem is that when I dial voicemail from this handset now,
> which is ADSI-enabled, I see the following message on the text screen:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Downloading Scripts
>
> I don't see any activity on the console in terms of logging, and I
don't> see
> any way to elevate ADSI logging. Within less than a second, I see:
>
> Comedian Mail
> download refused.
>
> Services is full
>
> At this point the voicemail's welcome script plays and the display
> changes
> to:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Load Cancelled
> ADSI Unavailable
>
> at this point voicemail's works like it used to before ADSI.
>
> Is any of this ringing any bells with anyone? Any tips appreciated ...
> I've looked around but I'm really not finding any documentation on
how
> to make
> this work.
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
>
> ----- Original Message -----
> From: "Darren Nickerson" <darren.nickerson@ifax.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Monday, December 29, 2003 8:12 PM
> Subject: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> > Folks,
> >
> > I have an Astra 480 that was delivered without any programming. On
the> main
> > LCD, it says:
> >
> > PLEASE PROGRAM ME
> > Asterisk
> >
> > I thought I would program it, so I added adsi=yes for this extension
> to
> > zapata.conf, and then I created an extension:
> >
> > ;;
> > ;; Temp hack for programming phones
> > ;;
> > exten => 998,1,ADSIProg(asterisk.adsi)
> > exten => 998,2,Hangup
> >
> > Dialing 998 from the phone worked - the phone said a download was
> available
> > and asked me to accept, which I did. I saw:
> >
> > Connected to Asterisk CVS-12/17/03-02:39:14 currently running on
> testbed
> > (pid = 31583)
> > -- Starting simple switch on 'Zap/5-1'
> > -- Executing ADSIProg("Zap/5-1",
"asterisk.adsi") in new stack
> > -- ADSI Available on CPE. Attempting Upload.
> > -- Executing Hangup("Zap/5-1", "") in new
stack
> > == Spawn extension (default, 998, 2) exited non-zero on
'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> > -- Starting simple switch on 'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> >
> > When it's done and asterisk hangs up though, my phone seems
unchanged.> Still
> > asks to be programmed.
> >
> > I can't seem to find a how-to on the wiki, or in the PDF. Looks
like
> an
> > addition might make sense, and I'd be glad to help if I could get
this> > sorted out. Am I missing something obvious?
> >
> > -Darren
> >
> > --
> > Darren Nickerson
> > Senior Sales & Support Engineer
> > iFAX Solutions, Inc. www.ifax.com
> > darren.nickerson@ifax.com
> > +1.215.438.4638 ext 8106 office
> > +1.215.243.8335 fax
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
Cheryl Millossi
2003-Dec-31 19:39 UTC
[Asterisk-Users] Programming an unlocked ADSI phone?
Hi Darren (and anyone interested in this issue),
Just an FYI that the factory reset procedure that wipes out the programming in
these phones is different for the 390 than the 480 phone. If any of you need
this procedure, or information on ADSI programming or the 390/480 phones in
general for this market (Asterisk), please feel free to contact me directly
(Sorry but I rarely have the chance to keep up with the discussions here).
Anyway, I'm off home now. I wish you all a wonderful New Year!
Regards and Best Wishes,
Cheryl Millossi
Sayson Technologies, Ltd.
604-629-5014 (Tel)
604-732-8726 (Fax)
__________________
Confidentiality Notice
The information contained in this communication is confidential and/or
proprietary business or technical data. If you are not the intended recipient,
you are hereby notified that any dissemination, copying or distribution of this
communication, or the taking of any action in reliance on the contents of this
communication, is strictly prohibited. If you have received this communication
in error, please immediately notify us by telephone (604-730-1842) or
electronically by return message, and delete or destroy all copies of this
communication.
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: December 31, 2003 4:15 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
I've tried it several times, and your ADSI clearing tip didn't check out
on
my phone ... in particular:
Hit options
Hit Mute or Flash
When I hit options, then the mute button (I don't have a flash button)
I'm
still left in the options screen.
-d
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "PBX" <pbx@tuxnetworking.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, December 31, 2003 6:42 PM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
I wanted to give you some guidance on the configuration of the phone....
Here is sniplet of configuration Aastra 390 and 480 Phones...
In an ADSI script for the 1st Slot:
;
; Asterisk default ADSI script
;
;
; Begin with the preamble requirements
;
DESCRIPTION "Asterisk PBX" ; Name of vendor
VERSION 0x00 ; Version of stuff
;SECURITY "_AST" ; Security code
SECURITY 0x9BDBF7AC ; Security code
FDN 0x0000000F ; Descriptor number
In an ADSI script for the 2nd Slot:
;
; Asterisk default ADSI script
;
;
; Begin with the preamble requirements
;
DESCRIPTION "Asterisk PBX" ; Name of vendor
VERSION 0x00 ; Version of stuff
;SECURITY "_AST" ; Security code
SECURITY 0x78921D49 ; Security code
FDN 0x85EFD9DA ; Descriptor number
You wouldn't need to program any other slots than these 2, and the 1st
slot is the only one that MUST contain programming. This is because the
first slot is triggered when the phone rings or when the phone is placed
off-hook. The second slot (the Self Launching slot) is triggered when
the phone has had no activity for a certain amount of time. Programming
in this slot can be identical to slot 1, or it can be completely
different, such as for advertising purposes.
How to clear the ADSI Scripts from the phone....
Hit options.
Choose Time/Date
Set the time to Jan 1 12:00am
Hit done
Hit done
Hit options
Hit Mute or Flash
A display giving the CPE ID and other stuff will appear
QUICKLY press the # key
Hope this helps.....
-gcc
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Darren
Nickerson
Posted At: Wednesday, December 31, 2003 2:58 PM
Posted To: Asterisk User Group
Conversation: [Asterisk-Users] Programming an unlocked ADSI phone?
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Tim,
Thanks for your continued participation in this thread.
The truth is, it's not clear to me how to delete a service ... the
services menu only allows me to 'Select' or 'Quit'.
It's also not clear to me how you managed to get Comedian Mail
downloaded to Slot 1 without unlocking it with a code.
When you did the ADSIProg originally (presumably you only did this
once), did you download to both slots, or just the second one?
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Tim Thompson" <tthompson@amatechtel.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, December 31, 2003 2:42 PM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
Have you tried deleting those services and adding them back in by
checking voicemail 1st (dial 8500) then dial your 8600 for AdsiProg
You should be able to just hit the "#" during the call, but you will
also have to make sure you have the |Tt defined in your extensions.conf
file as well.
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Wednesday, December 31, 2003 10:02 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Yes, there are 2 available slots. When I push services, I see:
Services> Asterisk PBX
Asterisk PBX
<available>
<available>
As I mentioned, the only soft-key I seem to have is 'VMail', and when I
select that I still get:
Comedial Mail
download refused
Services is full
And yet somehow there does seem to be some ADSI functionality later on,
when it falls back to a voice prompt after the download is refused and
I'm navigating the voice prompts, reading the messages.
It troubles me that Asterisk isn't very chatty about the ADSI stuff ...
when I access VMail all I see is:
-- Starting simple switch on 'Zap/5-1'
-- Executing VoiceMailMain("Zap/5-1", "") in new stack
(here's where the ADSI stuff seems to happen on the phone, download
refused etc)
-- Playing 'vm-login' (language 'en')
[snip rest of log]
There's no indication that any ADSI transactions are going on here, but
that tell-tale tone can be heard and the little rotating animated cursor
on the phone means _something_ is definitely going on at the ADSI level.
Am I missing a debug option that could show me more about what may be
going wrong?
I'll get with Sayson tech support today to see if they can make any
sense of this.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Tim Thompson" <tthompson@amatechtel.com>
To: <asterisk-users@lists.digium.com>
Sent: Wednesday, December 31, 2003 9:59 AM
Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
When you push your services button, are there any "<available>"
slots.
If not, delete the 3rd or 4th ones....
Don't know if it matters, but I have:
Comedian Mail
Asterisk PBX
<available>
<Aastra SL>
The only "selectable" ones are the Comedian Mail and the Asterisk PBX.
You might try deleting them all and reloading.
And "#" is the Transfer button. 8-)
Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227
-----Original Message-----
From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
Sent: Tuesday, December 30, 2003 9:29 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
Update #2
According to the helpful folks at Sayson, this phone actually has two
'slots', and the ADSI stuff needs to be downloaded to both (the second
one kicks in when the phone is idle for more than 1s). I had only
downloaded asterisk.adsi to the first slot, which explains why I was
seeing the default (PLEASE PROGRAM ME) triggered from slot 2. I
downloaded to the second slot and all is well now ... at least the phone
now identifies itself as I asked it to, and seems to be programmed ;-)
It seems to me that asterisk.adsi is pretty vanilla - not much
functionality. Has anyone built a better mousetrap that they'd care to
share?
My second problem remains ... when I connect to voicemail now I see:
Comedian Mail
download refused
Services is full
but I don't see any errors in Asterisk's console. What's up with
that???
I am now seeing some really cool functionality once I get past this
point. As I'm checking voicemail by navigating the menus, I see stuff
like:
>Old Messages
Message 1 of 5
Unknown
Tue Dec 23 07:46:02
Sweet!
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax
----- Original Message -----
From: "Darren Nickerson" <darren.nickerson@ifax.com>
To: <asterisk-users@lists.digium.com>
Sent: Tuesday, December 30, 2003 4:18 PM
Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
> Thanks for the reply Tim - I was beginning to think nobody used this
stuff> ;-)
>
> As you can tell, I'm a relative newcomer to ADSI - I'm really not
sure
what> to expect once the phone gets programmed, but I would not expect to
see> (PLEASE PROGRAM ME) still, and I would have hoped it would not have
broken> voicemail so readily.
>
> I'm not using a channel bank at all ... I have a very simple setup
using
two> x100p FXO cards and one TDM400P FXS card.
>
> As I mentioned below it does appear that SOMETHING was loaded into the
> phone, and it does appear to at least TRY to use ADSI when accessing
> voicemail.
>
> It's odd ... it's like everything worked but I'm left saying
...
okayyyyy,> now what? The phone isn't incredibly functional at this point - even
if I
do> go into the services menu and select 'Asterisk PBX' this selection
only> persists until I use the phone once. Also, there aren't soft keys for
> anything useful like transferring a call ... how WOULD one do that
with
this> phone anyway?
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
> ----- Original Message -----
> From: "Tim Thompson" <tthompson@amatechtel.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Tuesday, December 30, 2003 3:48 PM
> Subject: RE: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> What kind of channelbank/FXS port are you connecting to?
>
>
> I've seen problems connecting to some of the older versions of the
> Adtran Total Access 750's. I wouldn't doubt there would be
problems
on> other channelbanks with older firmwares. Of course, no firmware on
CAC> AB1's
>
>
> I have the AAstra 480, Adtran 750 Channelbank (updated firmware),
T100P> card, and it worked fine on the first try with current CVS.
>
> Tim Thompson
> Commercial Sales Engineer
> http://www.amatechtel.com
> (806) 722-2227
>
>
> -----Original Message-----
> From: Darren Nickerson [mailto:darren.nickerson@ifax.com]
> Sent: Monday, December 29, 2003 10:09 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Programming an unlocked ADSI phone?
>
> Update.
>
> As I mentioned in my first post (below), I had managed to get the
phone> to
> accept a download from asterisk, but it still said PLEASE PROGRAM ME
> after the download was completed. After further investigation it does
> appear
I> downloaded SOMETHING to the phone, because if I select the services
> button on the front of the phone, I get into a menu that says:
>
> Services
> > Asterisk PBX
> Asterisk slot 2
> <available>
> <available>
>
> If I select the first one in the list, the phone does change from
PLEASE> PROGRAM ME to "** Asterisk PBX**" and there's a VMail
softkey!!
However,> if
> I pick up the handset and replace it, I'm back to "PLEASE PROGRAM
ME"
> again. Is this normal?
>
> My second problem is that when I dial voicemail from this handset now,
> which is ADSI-enabled, I see the following message on the text screen:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Downloading Scripts
>
> I don't see any activity on the console in terms of logging, and I
don't> see
> any way to elevate ADSI logging. Within less than a second, I see:
>
> Comedian Mail
> download refused.
>
> Services is full
>
> At this point the voicemail's welcome script plays and the display
> changes
> to:
>
> Comedian Mail
> (C) 2002 LSS, Inc.
> Load Cancelled
> ADSI Unavailable
>
> at this point voicemail's works like it used to before ADSI.
>
> Is any of this ringing any bells with anyone? Any tips appreciated ...
> I've looked around but I'm really not finding any documentation on
how
> to make
> this work.
>
> -Darren
>
> --
> Darren Nickerson
> Senior Sales & Support Engineer
> iFAX Solutions, Inc. www.ifax.com
> darren.nickerson@ifax.com
> +1.215.438.4638 ext 8106 office
> +1.215.243.8335 fax
>
>
> ----- Original Message -----
> From: "Darren Nickerson" <darren.nickerson@ifax.com>
> To: <asterisk-users@lists.digium.com>
> Sent: Monday, December 29, 2003 8:12 PM
> Subject: [Asterisk-Users] Programming an unlocked ADSI phone?
>
>
> > Folks,
> >
> > I have an Astra 480 that was delivered without any programming. On
the> main
> > LCD, it says:
> >
> > PLEASE PROGRAM ME
> > Asterisk
> >
> > I thought I would program it, so I added adsi=yes for this extension
> to
> > zapata.conf, and then I created an extension:
> >
> > ;;
> > ;; Temp hack for programming phones
> > ;;
> > exten => 998,1,ADSIProg(asterisk.adsi)
> > exten => 998,2,Hangup
> >
> > Dialing 998 from the phone worked - the phone said a download was
> available
> > and asked me to accept, which I did. I saw:
> >
> > Connected to Asterisk CVS-12/17/03-02:39:14 currently running on
> testbed
> > (pid = 31583)
> > -- Starting simple switch on 'Zap/5-1'
> > -- Executing ADSIProg("Zap/5-1",
"asterisk.adsi") in new stack
> > -- ADSI Available on CPE. Attempting Upload.
> > -- Executing Hangup("Zap/5-1", "") in new
stack
> > == Spawn extension (default, 998, 2) exited non-zero on
'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> > -- Starting simple switch on 'Zap/5-1'
> > -- Hungup 'Zap/5-1'
> >
> > When it's done and asterisk hangs up though, my phone seems
unchanged.> Still
> > asks to be programmed.
> >
> > I can't seem to find a how-to on the wiki, or in the PDF. Looks
like
> an
> > addition might make sense, and I'd be glad to help if I could get
this> > sorted out. Am I missing something obvious?
> >
> > -Darren
> >
> > --
> > Darren Nickerson
> > Senior Sales & Support Engineer
> > iFAX Solutions, Inc. www.ifax.com
> > darren.nickerson@ifax.com
> > +1.215.438.4638 ext 8106 office
> > +1.215.243.8335 fax
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users