similar to: fwd on busy when calling multiple extensions at once

I am getting ready to install Asterisk and I was looking into the Polycom IP600 phones. I spoke with Polycom sales to verify the multiple line appearance and they said it would work. More specifically, if lines 1-3 all contain the same SIP registration info, the Polycom will only send out 1 SIP registration to the server and then handle the calls ringing on multiple lines. I was wondering if

I have 2 issues which I need to resolve on our production Asterisk server: We are currently using Polycom IP600 VOIP phones for our office which are capable of handling 2 calls per SIP registration. What we're finding is when staff are on the phone, Asterisk will pass them a second call which will show up on their display, and an audible beep is heard over the phone (regular call waiting). I

Hi, I'm testing a Polycom IP600. With firmware version 1.1 the phone reboots at any time. With firmware version 1.2, the first reboot was an endless reboot. Then I moved the phone to another lan port, then it worked fine. Then I installed again in the initial lan port and the phone works well. However after some time of inactivity (1 hour?), the IP600 stops to send and receive calls.

Hi, I am trying to write a dialplan that will use Dial() to call two local extensions. One extension will run an AGI script (a continuous background process, running until hangup), the other will connect the active channel to Jack() (also running as continuous process, until hangup). This is my current dialplan attempt: --------------------- [from-internal] exten = 514316XXXX,1,Answer() same

Hello, I recently upgraded to Sip 1.3.1 and noticed that the Reject Button is no longer appearent on the screen when a second incoming call comes in unless I press the hold button on the first call. Does anyone have a work around for this to reject a call while continuing to talk to the first party? I should also point out that I don't want it to be on *, as the situation varies from call

Hi All - I've got a load of Polycom phones, and for the most part, I think they're great, but one thing that is bugging the heck out of me (and my users) is the "on-hold" feature. When you're on a call, and another one comes in, it doesn't ring the second line appearance on the phone, even though I have it registered separately, and I've tried to make my

Is anyone successfully using one of these with Asterisk? I cannot get the phone to register, this message keeps coming up on the Asterisk console: Jul 29 14:11:39 NOTICE[1125350192]: chan_sip.c:7323 handle_request: Registration from '"000BEA801CA6" <sip:000BEA801CA6@hcs.net:5060>' failed for '204.194.36.138' The telephone LCD says "SIP registation

I am currently testing a new Asterisk installation. The server has a T100P connected to a PRI, and about 50 Polycom IP600 phones connected via the local network. Every couple hours, Asterisk randomly stops responding to all calls, both incoming on the PRI and calls from the SIP phones. I'm not sure how or where to start debugging it. When Asterisk stops working I can still connect to

Have a strange problem... When a C7960 calls the Polycom ip600, the ip600's first line button blinks, the ip600 display shows the proper callerid, but the phone does not ring at all. If I call the same ip600 from a bt102, the ip600 rings properly. If I call the same ip600 from another C7960, the ip600 rings properly. All phones and asterisk are on the same lan within a few feet. The

Hi list! Is anyone using the Kirk IP600/3 with SIP firmware connected to Asterisk? Any experiences / caveats? If anyone would be willing to share the dump of their IP600 config file, i would really appreciate it. Is there anything special i should put in my asterisk config? Thanks !!! Remco

Hello, I am looking at the Polycom phones. The ip600 has a very nice screen, is that the only real advantage over the ip500 and ip300.. Is it worth the extra dollars? Kind regards Michael Felder IT Medic Australia Pty. Ltd. P: 03 9557 2213 F: 03 9557 2214 M: 0419 568 217 E: Michael@ITMedic.com.au <blocked::mailto:Michael@ITMedic.com.au> http://www.ITMedic.com.au

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hello all, Has anyone used the SIP version of this phone with Asterisk? I see Polycom has a H.323 and MGCP version also, does anyone know if you flash the phone to swith protocols? Thanks in advance for the info. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm

Hi list! Does anyone have experiences with the updated model of the Kirk IP600? The V3 model is supposed to support SIP instead of only SCCP or H323 which would make the use with Asterisk a lot easier. I have only tested the Kirk IP600 V2 with SCCP / Skinny protocol which is still giving me severe headaches : - the standard Skinny driver in * doesn't work, only the version of Sergio

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

Hi All, This is the first time I'm submitting a patch, and I hope it fixes more than it breaks. I'm putting it here, since John Todd mentioned a while ago about the heavy load Mark and crew have at Digium (doing such good work), so I thought all of us could test this first, and if ok submit for inclusion in CVS later if appropriate. This is an extension to work done earlier (sorry I

Hi all, I've just updated to current CVS, and have 2 polycom IP phones, one is a IP600 and the other is a IP300. The IP600 shows the status of the IP300 and a ZAP line quite nicely, but the IP300 won't show the status of the IP600.... Is there any additional debug apart from "show hints" to see why this might not be working ?? -= Registered Asterisk Dial Plan Hints =-

Hello, is there a way to disable call waiting in sip? I`m using grandstream 101 and even when the phone is in use I hear ringing in the headset. It is pretty annoying , is there some way to disable this? I cant find anything like it in the grandstream docs. Thanks -- Anton Yurchenko<phila@dg.net.ua> Digital Generation

I'm going to try, Thanks very much Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Remco Barende Inviato: luned? 30 gennaio 2006 20.04 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Kirk IP600 Hi! Yes, it works (sort of) but I still have some issues.

Hello list: I have a very odd problem. Seemingly randomly, my Polycom IP600 phones will ring without a call being placed to it. That is to say, a random phone will ring. Nothing shows up under Caller ID. Even the buttons that light up to show an incoming call do not light up. If you pick up the handset, you can hear the phone ring through the speaker. Hanging up the phone makes it stop