Hi list! Does anyone have experiences with the updated model of the Kirk IP600? The V3 model is supposed to support SIP instead of only SCCP or H323 which would make the use with Asterisk a lot easier. I have only tested the Kirk IP600 V2 with SCCP / Skinny protocol which is still giving me severe headaches : - the standard Skinny driver in * doesn't work, only the version of Sergio Chersovani is working but with some stability problems - audible echo - i have 2 kirk handsets and 2 Siemens handsets, the first 2 Kirk handsets always ring on an incoming call, the Siemens handsets only sometimes ring (don't know if this is caused by a problem in the SCCP driver or poor support of the IP600 for non-Kirk phones??) Because of my earlier experiences I am hesitating to try the V3 version. Experiences anyone? Thanks!
Garth van Sittert
2007-Jun-29 09:20 UTC
[asterisk-users] Kirk IP600 V3 DECT Wireless server
Hi Remco I have used the IP600 v3 with SIP support on Asterisk... apparently I was the 1st person globally to run it at a site. The 1st firmware was a bit buggy at times, but seems to be much better on the later versions. Kind Regards Garth Garth van Sittert BSc (Physics & Computer Science) ----------------- Mobile: +27 (0)83 791 6662 Email: garth at bitco.co.za Phone: 08600 BITCO MSN: garthvs at hotmail.com Web: www.bitco.co.za Remco Barendse wrote:> Hi list! > > Does anyone have experiences with the updated model of the Kirk IP600? > The V3 model is supposed to support SIP instead of only SCCP or H323 which > would make the use with Asterisk a lot easier. > > I have only tested the Kirk IP600 V2 with SCCP / Skinny protocol which is > still giving me severe headaches : > > - the standard Skinny driver in * doesn't work, only the version of > Sergio Chersovani is working but with some stability problems > - audible echo > - i have 2 kirk handsets and 2 Siemens handsets, the first 2 Kirk handsets > always ring on an incoming call, the Siemens handsets only sometimes ring > (don't know if this is caused by a problem in the SCCP driver or poor > support of the IP600 for non-Kirk phones??) > > Because of my earlier experiences I am hesitating to try the V3 version. > > Experiences anyone? > > Thanks! > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >