similar to: Spurious ring burst on TDM400 FXS port

Folks, I recently swapped a TDM400 FXS card that was working perfectly into a new server (running recent CVS), and it's either misbehaving (unlikely), or I've missed something obvious (much more probable). Everything seems to be working, but I can't get any dialtone from it when I plug a phone into any of the 4 ports!! All of the jacks are lit (green lights) but they all seem dead

Hi all, I just got my long awaited FXS modules for a TDM400 card, and was a bit puzzled about how my phones and the FXS interface worked together. Here goes: In Sweden (that's where I am located) phones traditionally are connected in daisy chain configuration. This means that a phone in on-hook condition passes the line through back onto the outer pair of the RJ11, back into the wall

Does anyone know (appoximately) the max loop length that the FXS module on a Wildcat TDM400 card will drive an analog phone(over standard - say cat3 or 26 gage twisted-pair wire). It's clearly not going to be 18kft, but perhaps 4000 feet? Thanks Elliot Eichen elliot.eichen@tbx25.tonebridge.com

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it will not ring, although I can call out from it. I have also tried my GPO 332L

I have been trying for some time now to make the hook flash work on the FXS port. I am using Asterisk 1.4.10.1 with zaptel 1.4.4. When I "manually" flash the hook I can manage to find the duration to put a call on hold. However when pushing the flash button it never works. The phone's flashtime seems to be too short. I tried to set a shorter flashtime in the zapata.conf file, but it

I've been having trouble with making outbound calls to my TELCO from a TDM400 card (FXS KS signalling) after upgrading from 1.6-beta9 to 1.6.0. The problem is completely intermittent. When it fails, I get this message: [Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) At some point, it starts working, but I don't know what

I have a TMD400 card installed in a PC with one fxs (installed in slot 2) and two fxos (installed in slots 3 & 4).? fxos work fine but I am unable to get a dial tone for any devices connected to the fxs.? I have correctly connected the power supply to the card and I have even tried moving the card from slot 1 to 2 on the board. Below is from the console when I try to route a call from FXO on

Im having a problem getting the 2 cards working together. I added the TDM with 3 FXO and 1 FXS board. The TE405p is working fine. THe TDM registers and identifies the FXO's and FXS but cant get them to go off hook. I hope someone can help. Asterisk seems to THINK its dialing it sends manager status as dialing, and it just sits there with no tones, on the phone dialing out. If I dial,

Hi all, I have been looking at the code for both the zaptel driver (wctdm.c/wcfxs.c) and the asterisk channel driver (chan_zap.c) trying to figure out how much of this that has been implemented. So far I can see that the current stable 1.0.9.1 zaptel driver don't have the SETPOLARITY ioctl that would be required to properly signal the Swedish/Dutch CLIP, but the 1.2 beta1 has this

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf

I have mailed the list on this topic, asked on the IRC channel, and even called Digium. I have two customers who are pretty upset about this, and it hasn't helped my standing with them that I have so far in several months not been able to help them. It seems a simple request: I have a system with two X101Ps and a TDM30. Customer is talking on the phone, his Zap FXS interface using one

Hi, I'm using Samba 2.0.7 and I'm experimenting with shares at the moment. I created a share on my SuSE 6.4 box and accessed it from a Win2000 machine. Than I deleted this share entirely, and expected that I wouldn't be able to see it anymore from the win2000 box (after refreshing the view in windows explorer) but the opposite happened. What could be the explanation and the

Hi, all Did anyone tried TDM400 card on old main board (Intel 440LX chipset -- PII)? The reason I am asking is because TDM400 needs PCI2.2 and main board is PCI2.1 I do not want to upgrade yet. Thanks, Rudolf

I recently swapped 2 FXO modules on to what had previously been a 4 FXS version of the TDM400 board. The FXS ports are recognized - the FXO ports don't appear to be recognized (ie modprobe wcfxo and ztcfg both say channel 1 isn't there). Has anyone experienced this problem? All software is current as of this AM. If the old FXS modules are re-installed all works just dandy (other than

When configuring a TE410P which is only attached to a single E1 together with a TDM400, how should one count the channels for the next Zap interface? Must I put 4 span lines in zapata.conf and define all channels up to 124? thus having the TDM400's start at 125? Or can I comment out the 3 spans I don't use and start at channel 32 for the TDM400? (this would get nasty when adding extra

Hi all, We have tested both tdm400 and BRI 1 port HFC based with mISDN driver and with both cards we have the same problem... so probably it's due to our misconfiguration, but we couldn't find anything useful on google. With TDM400 we can place and receive calls, but if we receive a call from TDM400 and we reject it from a sip phone , asterisk send the hangup but the line continue to

Hello, I have the following configuration : E100P -> * -> TDM400 -> Modem When I receive FAXes, about 20% of them are corrupted : pages are not always complete. If the fax is complex or with numerous pages, it's usually a mess. Before that, I was using spandsp with success. Unfortunately it's too picky with some broken fax (training failed). Since this failure only occurs with

I've got an old Dell Optiplex (Pentium-II, 1998 Vintage) which is successfully running an X100P card. I'm hoping to upgrade to a TDM400. Has anybody tried running these cards in old Optiplex machines? I'm not particularly worried about horsepower - more about the motherboard having a PCI bus that's able to power up the card... -Ronan

Hello, I have a TDM400 with 2 FXS modules and 2 FXO modules, as follows: Zap/1 - internal phone Zap/2 - internal modem Zap/3 - exchange Zap/4 - exchange Recently I upgraded zaptel (and kernel modules) from 1.0.9-1.1 to 1.0.9.1 and upgraded asterisk to 1.0.9.dfsg.1-3, which are Debian versions for Debian/sarge of the packages I believe the Debian maintainers created (not in Debian) The above

Hi, I'm running * 1.2.7.1 on Red Hay 9.0 w/ a TDM 400 2 x FXS, 1 x FXO. I'm using a VTech cordless that makes three short beeps when someone another extension is picked up, presumably this lets you know if someone is trying to listen in.. Everything works, except the VTech now makes the three beeps everytime you try to use it, even if another extension is in use. It seems as though the