similar to: RE: Asterisk-Users digest, Vol 1 #3413 - 14 msgs

Hi, I just got my TDM400P card (2 modules) and i installed it no probs. The card is detected fine, but for some reason when I add the card to zaptel.conf i get the following error: --snip-- ZT_CHANCONFIG failed on channel 2: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? --snip-- My /etc/zaptel.conf looks

Hi, I restarted my * box before and now my second X100P card has stopped showing up in Asterisk. It shows up in my dmesg in Gentoo, but only 1 channel is being registered: [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found -- Registered channel 1, FXS Kewlstart signalling == Registered channel type 'Zap' (Zapata Telephony

Hi All, Something really weird is going on. I just stopped and started my asterisk server, and it just decided to stop starting. I only made one change to the config file for the musiconhold.conf, and now for some strange unknown reason, i'm getting the errors: [chan_modem_i4l.so]Apr 28 15:26:42 WARNING[16384]: loader.c:240 ast_load_resource:

Does anyone know a place in Australia that sells a power supply suitable for the IAXy? I haven't had any luck tracking one down. -- jeremy bogan [ jeremy@segpub.com.au ] segment publishing - design.develop.host

For some unknown reason, two of my IAX peers started registering on strange ports. Nothing has changed in the config, but they cannot make calls to me, however I can still make calls to them. In my IAX2 peers, the following is showing: user1/user1 203.XXX.XXX.XXX (D) 255.255.255.255 4585 OK (21 ms) user2/user2 203.XXX.XXX.XXX (D) 255.255.255.255 11280 OK (37 ms) I've

Hi , I have an asterix (1.2.7.1) box with 3 TDM400P and 10 FXO modules, and zaptel (1.2.5). The problem is that 6 modules can't be initaized and i get the folowing error: May 7 09:17:37 WARNING[7739] chan_zap.c: Unable to specify channel 9: No such device May 7 09:17:37 ERROR[7739] chan_zap.c: Unable to open channel 9: No such device here = 0, tmp->channel = 9, channel = 9 ztcfg output

Hi, I have configured tdm400p alone and it works fine for me. But now i tried to add 2 x100p in the same machine with the following configs, but asterisk refuses to load, can someone guide me what i have done wrong. Following r the configs and output. TIA, Azher >> ./asterisk -vvvvvc [chan_zap.so] => (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found --

Hi all, Does anyone know of any providers that can offer local numbers based in the UK via IAX or SIP? We're looking at getting a number based in the UK. Thanks! -- jeremy bogan [ jeremy@segpub.com.au ] segment publishing - design.develop.host

Hello, I am having problems configuring a TDM400P 4 Port FXO card with groundstart signalling. The box has 2 X100P's, 1 TDM04B and 1 TDM40B. I can configure it for loopstart and it works, just not groundstart, which I need for this installation. What am I missing? Thanks! Mark /etc/zaptel.conf #two X100P FXO Cards # fxsls=1-2 # TDM400P 4 Port FXO (TDM04B) fxsgs=3-6 # TDM400P 4 Port

Hi- I'm totally stumped configuring my TDM400P with one FXS and one FXO module. Before I got the FXO module, I used to have an X101P, and everything was working very well. Now * doesn't seem to recognize the FXO channel. I've searched the wiki and the list archives. Stock Debian 3.0 stable installation. Any advice? Thanks. -- David Here's my configuration: modprobe zaptel

Hi there, I have a TDM400P (1 x fxs, 1 x fxo) which I'm attempting to run on linux 2.6 (gentoo), without much success at the moment. I have previously had it working on a 2.4 installation, but when I moved to a new box and installed a 2.6-based system, it failed to work. In both cases I'm using whatever (libpri, zaptel, asterisk) is checked out by default (I assume that means HEAD)

Hello all! I have tried and tried to resolve this one to no avail. Hopefully one of you can help... The system in question is a Compaq Evo D600 (iirc) business desktop, with a 1.4GHz Pentium 4 and 512mb of RAM, running a stock install of PoundKey 1.2. It has two Digium cards installed: a TDM400P with four FXO modules, and a TE110P hooked to a Carrier Access Adit 600 which serves 8

Hello, After installing on Ubuntu 10.04 using the tutorial on http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html I have a running instance of Asterisk. PROBLEM: result of dahdi_cfg: DAHDI Tools Version - 2.2.1 DAHDI Version: 2.2.1 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)

I think I have a bad FXS module on my TDM400P. Channel map: >> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >> Channel 02: FXS Kewlstart (Default) (Slaves: 02) >> >> 2 channels configured. >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) The zaptel loads ok, but the wctdm reports No such device or address and stays loaded. The

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected

Hi, I bought the Digium Asterisk Developers kit a few weeks ago, got the x101p and a tdm400p cards, both seemed to be working fine up until today, now the tdm400p seems to have gone to the great PBX in the sky ...... If I left the reciever on the analog phone I don't get a dial tone and nothing appears on the asterisk console, If I use my cellphone and dial in I see Asterisk Ready.

I am having trouble with chan_zap.so not loading. When I load it from modules.conf, Asterisk bails out without any error message. When I load it from the console, it just says "Unable to load module chan_zap.so" no matter what verbose level I am using. dmesg says: Zaptel Version: 1.4.4 Zaptel Echo Canceller: MG2 Freshmaker version: 73 Freshmaker passed register test Module 0:

This has got to be a stupid error I'm making... I have been experimenting with different hardware and software configurations before I decide what to use as a production platform. Up until just recently things were going well. But now it appears I'm unable to get access to my TDM400p from Asterisk. I know the TDM card works fine, used it in another machine where it performed flawlessly.

Hello all, Ok it is Sunday afternoon and I am going crazy. I have been running in circles so long that I can't think straight. As an example, I sent this message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2, DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422 at the end of installing dahdi-linux and dahdi-tools I get: