asterisk users - Dec 2004 - Dead TDM400P ?

Hi,
 
I bought the Digium Asterisk Developers kit a few weeks ago, got the x101p and a
tdm400p cards,
both seemed to be working fine up until today, now the tdm400p seems to have
gone to the great PBX in the sky ......
 
If I left the reciever on the analog phone I don't get a dial tone and
nothing appears on the asterisk console, If I use my cellphone and dial in I see
 
Asterisk Ready.
*CLI>     -- Starting simple switch on 'Zap/1-1'
    -- Executing Dial("Zap/1-1", "Zap/2|20") in new stack
    -- Called 2
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/2-1 is ringing
    -- Hungup 'Zap/2-1'
  == Spawn extension (incoming, s, 1) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'
 
If I pickup the handset (which is not ringing) the console does not change, but
I do hear "brrrrr brrrr" line ringing (sounds like a far off garbled
electronic ringing)

is my TDM400p dead ?

 

I've tried going back to a ver simple test configuration as per the digium
FAQ http://www.digium.com/index.php?menu=faq#Configuration_1  but this has made
no difference .....


ZTCFG -VVreports

Zaptel Configuration
=====================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.


The Light on the TDM400P does com on when I load the module .....

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041208/e06444ac/attachment.htm

Have you tried different phones? This sounds a little like an issue I
had with older Siemens phones we had around and since you appear to be
in Europe you could be seeing similar problems. Oh, these worked
intermittently.

They work now with a patch that changes ringing frequency in wcfxs.c

Hi,
 
we are based in Ireland ....
I've tried 3 different handsets - a philips elegance, an Audioline Tel 35
and a generic BT telephone, all give the same result.



------------------------------

Date: Wed, 8 Dec 2004 18:51:10 +0100
From: Wilson Pickett <wilson.pickett@gmail.com>
Subject: Re: [Asterisk-Users] Dead TDM400P ?
To: Asterisk Users Mailing List - Non-Commercial Discussion
        <asterisk-users@lists.digium.com>
Message-ID: <da8589df04120809515eaef21@mail.gmail.com>
Content-Type: text/plain; charset=US-ASCII

Have you tried different phones? This sounds a little like an issue I
had with older Siemens phones we had around and since you appear to be
in Europe you could be seeing similar problems. Oh, these worked
intermittently.

They work now with a patch that changes ringing frequency in wcfxs.c


------------------------------

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 3907 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20041208/acb0c33f/attachment.bin