similar to: X100P remote hangup detection problem

It seems the information out there on this topic was confusing enough to cause me to waste a lot of time, and that this topic is rehashed periodically. So now it's my turn.... I had a modem with an Intel 537EP chip on it and thought it might work with the zaptel drivers. Initially, it seemed the only issue would be the PCI device & vendor codes. Then, I ran into the problem that

Hi, I recently decided to change my setup from AsteriskNow to plain-asterisk 1.4, which I wanted to set up and configure myself on a server running Debian Etch 64bit version. Hardware: Asrock motherboard, model 775Dual880-Pro, with a Celeron D running at 2.8GHz, 1GB memory, standard Nvidia GF4MX videocard, and one X100P clone card. Running the AsteriskNow, everything worked fine, except for

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

I still have echo during the first 15 seconds (or so) of each call, and the exact same thing is happening with either of two X100P in the same 2.2ghz system. asterisk# cat /proc/interrupts CPU0 0: 198457690 XT-PIC timer 1: 60 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 0 XT-PIC usb-uhci 8: 1

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

Hi! The X100P is working - partly. I can make outgoing calls. But the card has got a problem detecting incoming calls. Even in verbose mode I don't see any hint that the card detects a call. At the moment I'm using the card behind my old ISDN telephone system. Could it be a problem with the line voltage? Can I adjust anything when loading the kernel module? Bye! Michael

I was studying the asterisk-users list archives to learn if anyone has had success with an X100P on a sparc. I noticed some postings on the subject. I am wondering if anyone has learned anything new? I have an Ultra-60 running Gentoo with 2.6.10 and udev. I built * 1.0.5 and have been enjoying various SIP configurations, with 2 sipura phones and 2 UIP200 phones (got them working!) in my home,

Thanks for the reply Bill. I am aware of the interrupts problem. To solve it I have already disabled my serial ports freeing up interrupts 3 and 4 and these are allocated to the two cards. This was done 2 months ago and has not solved the problem. Is there any way that something can wake up every now and then and generate these two interrupts? My current /proc/interrupts is as follows:

PROBLEM: My x100p only does bad things. When I plug the line from the wall into the card, other phones in my house go nuts, no dialtone, crazy clicking, random tones, etc. Following the steps below, the line is screwed up any time I test after step 2. Just plugging the line from the wall into the x100p takes my other phones off line. External calls to my line hear busy. Obviously, can't

Hi, I have problem with X100P clone card.I can not force it to work under Asterisk 1.4.27.1 and DAHDI Version: 2.2.0.2. I looked over and over on configuration and could not see any mistakes. Here are relevant configuration files. /etc/dahdi/system.conf > fxsks=1 > echocanceller=mg2,1 > loadzone = hu > defaultzone = hu > dahdi_tool > OK Wildcard X100P

Ok, I have 2 PC's that are identical. I loaded Redhat9 on the first and Asterisk and installed a x100p card and it works fine. I ghost the first PC and install the ghost on the second PC. Everything comes up on the 2nd PC but I can't get it's x100p card to load. The systems sees the card, it's on interrupt 11. It shows up in /proc/pci and /etc/sysconfig/hwconf and lspci shows it

Yo all, I have a problem with a Dutch (KPN) PSTN-line, connected to an X100P. The call wil sound OK at first, but after 10-20 minutes, the audio will start to crackle. Soon after that, this crackle turns into a continuous noise and the parties won't be able to hear eachother anymore. It also sometimes happens that the party on the TDM400P hears a very loud, short-delay echo of themselves,

Hi. I have a x100p card installed on my asterisk box... my zapata.conf file includes the following lines: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 echocancel=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 Basically, the zapata.conf file generated by make samples. Then in my extensions.conf I have this: [default] include => demo And demo is

Systems: Definity G3rV6 Suse 9.1 with two X100P cards. I'm having trouble getting Asterisk to interface with my Definity. I can call out fine (Asterisk to Definity), but if I call either X100P (DID from Definity), strange things happen. I figure I should probably get dialtone, punch in an Asterisk station number and get it to ring. Asterisk picks up fine, but I can't figure out what to

Does anyone know if there is a zapata.conf option to tell * to listen for a dialtone before dialing? I've got a couple of analog phones on a pstn line shared with a x100p * fx line. If someone is on the analog phone and another person initiates a call through * to use the same line, * dials over the top of the existing conversation. Is there a way to have * detect dialtone before dialing?

Hi All, Googling X100P Clone I found several information about these cards and seems that some winmodem has the same chip used from the original X100P. Here below a list winmodem which should work as X100P clone: 1057 Motorola 5608 SM56 PCI Fax Voice Modem E159 Tiger Jet Network Inc 0001 Tiger 300/320 PCI interface I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the

I've had the same thing happen, only on the single port T1 card and a channel bank, and one of the FXO channels also having a phone attached elsewhere... I just wound up putting that channel in a different context and running Exten => s,1,Hangup (I'm just using the line for outbound dialing) -----Original Message----- From: asterisk-users-admin@lists.digium.com

I have two X100P cards that were working just fine for months. When I run modprobe wcfxo today I got the following error: ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.19/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.19/misc/wcfxo.o: insmod wcfxo failed The output of dmesg said that wcfxo:Out of space to write register 06 with e0. What?s

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-15" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> <span class="postbody">Hello! <br> <br> I have a

I can either get the TE100P working or the 3 X100P clones working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel