asterisk users - Apr 2007 - x100p not showing in core show channels

Hi,

I recently decided to change my setup from AsteriskNow to plain-asterisk
1.4, which I wanted to set up and configure myself on a server running
Debian Etch 64bit version.

Hardware:
Asrock motherboard, model 775Dual880-Pro, with a Celeron D running at
2.8GHz, 1GB memory, standard Nvidia GF4MX videocard, and one X100P clone
card.

Running the AsteriskNow, everything worked fine, except for incoming
calls, not being routed right, but they entered the system, and mostly
they ended up into the voicemail.

To change that behaviour and to have more control of what I'm doing, I
reinstalled the same machine with Debian Etch, the 64bit version, as the
CPU (and the replacing one in a few weeks) runs EM64T nicely...
The setup ran OK, compilation etc too, except for zttool which I still
cannot compile.

When configging the server, I used several HowTo's and guides, but no
solution:

hereby the config parts that I did/changed:

/etc/zaptel.conf:

# Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
# This file is parsed by the Zaptel Configurator, ztcfg
# It must be in the module loading order
# Span 1: WCFXO/0 "Generic Clone Board 1"
fxsks=1
# Global data
loadzone        = be
defaultzone     = be


/etc/asterisk/zapata.conf:

[channels]
signalling=fxs_ks
group=1
context=incoming
channel=>1 ;X100P


/etc/asterisk/extensions.conf:
[incoming]
exten => s,1,Echo ;for testing the connection
;exten => s,1,Playback,demo-thanks ;for playing a file


Nothing happens when dialing in.

BUT:
ztmonitor 01 -vv gives levels, and when dialing in, the levels change
according to dialtone in my phone I use for calling the server.

AND:
core show channels gives me this:

asterisk*CLI> core show channels verbose
Channel              Context              Extension        Prio State  
Application  Data                      CallerID        Duration
Accountcode BridgedTo          
0 active channels
0 active calls



What am I doing wrong???
Anyone that can give a hand?

Thanks!
Just email me!
bram_at_antwerpen_dot_be

On Tue, Apr 03, 2007 at 11:17:57PM +0200, bram kortleven
wrote:
> Hi,
> 
> I recently decided to change my setup from AsteriskNow to plain-asterisk
> 1.4, which I wanted to set up and configure myself on a server running
> Debian Etch 64bit version.
> 
> Hardware:
> Asrock motherboard, model 775Dual880-Pro, with a Celeron D running at
> 2.8GHz, 1GB memory, standard Nvidia GF4MX videocard, and one X100P clone
> card.
> 
> Running the AsteriskNow, everything worked fine, except for incoming
> calls, not being routed right, but they entered the system, and mostly
> they ended up into the voicemail.
> 
> To change that behaviour and to have more control of what I'm doing, I
> reinstalled the same machine with Debian Etch, the 64bit version, as the
> CPU (and the replacing one in a few weeks) runs EM64T nicely...
> The setup ran OK, compilation etc too, except for zttool which I still
> cannot compile.
  apt-get build-dep zaptel

Or specifically:

  apt-get install libncurses-dev

(or something similar)
> 
> When configging the server, I used several HowTo's and guides, but no
> solution:
> 
> hereby the config parts that I did/changed:
> 
> /etc/zaptel.conf:
> 
> # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
> # Zaptel Configuration File
> # This file is parsed by the Zaptel Configurator, ztcfg
> # It must be in the module loading order
> # Span 1: WCFXO/0 "Generic Clone Board 1"
> fxsks=1
> # Global data
> loadzone        = be
> defaultzone     = be
> 
> 
> /etc/asterisk/zapata.conf:
> 
> [channels]
> signalling=fxs_ks
> group=1
> context=incoming
> channel=>1 ;X100P
> 
> 
> /etc/asterisk/extensions.conf:
> [incoming]
> exten => s,1,Echo ;for testing the connection
> ;exten => s,1,Playback,demo-thanks ;for playing a file
> 
> 
> Nothing happens when dialing in.
> 
> BUT:
> ztmonitor 01 -vv gives levels, and when dialing in, the levels change
> according to dialtone in my phone I use for calling the server.
> 
> AND:
> core show channels gives me this:
> 
> asterisk*CLI> core show channels verbose
> Channel              Context              Extension        Prio State  
> Application  Data                      CallerID        Duration
> Accountcode BridgedTo          
> 0 active channels
> 0 active calls
> 
> 
> 
> What am I doing wrong???
> Anyone that can give a hand?
What is the output of:

  zap show channels

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir