Miguel A Felipe RodrÃguez
2008-Jan-04 15:00 UTC
[asterisk-users] x100p wcfxo hangup on outgoing calss
Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup 'Zap/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Executing [91xxxxxxx at internal:2] Hangup("SIP/michelvd-b7b005b8", "") in new stack == Spawn extension (internal, 91xxxxxxx, 2) exited non-zero on 'SIP/michelvd-b7b005b8' And the other one, that I think its related, is that when I place a call for me cell, and I "discard" (I think its call like that) the call, asterisk doesnt understand it. I post my zaptel.conf fxsks=1 loadzone = es defaultzone = es and my zapata.conf [channels] language=es context=incoming switchtype=national signalling=fxs_ks usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=no rxgain=8.0 txgain=5.0 group=1 callgroup=1 pickupgroup=1 immediate=no answeronpolarityswitch=yes hanguponpolarityswitch=no faxdetect=incoming channel => 1
On Fri, Jan 04, 2008 at 04:00:30PM +0100, Miguel A Felipe Rodr?guez wrote:> Hi, > > Im getting mad with this error, I have a x100p installed with wcfxo > module loaded perfectly, I can receive incoming calls and detect very > good the hangup for incoming calls. But for outgoing calls its a mess. > > When I place a call for outgoing, i heard the ringing, my cell or > phone rings and when I pick up the phone it hangs: > > -- Called g1/91xxxxxxx > -- Hungup 'Zap/1-1' > == Everyone is busy/congested at this time (1:0/0/1) > -- Executing [91xxxxxxx at internal:2] Hangup("SIP/michelvd-b7b005b8", > "") in new stack > == Spawn extension (internal, 91xxxxxxx, 2) exited non-zero on > 'SIP/michelvd-b7b005b8'If you want to ask Asterisk to tell you why it chose to hangup, enable debug loggin (e.g: unrem the line 'full' in logger.conf sample), and then run: asterisk -rx 'logger reload' asterisk -rx 'core set debug 10' Now see what messages you get in the relevant log file (e.g: /var/log/asterisk/full ) when there's a hangup.> > And the other one, that I think its related, is that when I place a call > for me cell, and I "discard" (I think its call like that) the call, > asterisk doesnt understand it. > > I post my zaptel.conf > fxsks=1 > loadzone = es > defaultzone = es > > and my zapata.conf > [channels] > language=es > context=incoming > switchtype=national > signalling=fxs_ks > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=no > rxgain=8.0 > txgain=5.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > answeronpolarityswitch=yesThis is probably useless with an X100P, as it does not detect polarity events.> hanguponpolarityswitch=no > faxdetect=incoming > channel => 1 > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
Miguel A Felipe RodrÃguez
2008-Jan-04 22:18 UTC
[asterisk-users] x100p wcfxo hangup on outgoing calss
I have changed the signalling of the x100p to a fxsls, now i can make outgoing calls, but now I have another problem, cant detect hangup. I post the zapara.conf and the zaptel.conf so if any has idea of waht to change y have tested changing busydetect, busypattern, callprogress, etc.. but no whet results. zaptel.conf fxsls=1 loadzone = es defaultzone = es zapata.conf [channels] language=es context=incoming switchtype=national signalling=fxs_ls usecallerid=yes cidsignalling=dtmf cidstart=polarity hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=no threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echotraining=yes rxgain=2.0 txgain=1.0 group=1 callgroup=1 pickupgroup=1 immediate=yes callerid=asreceived busydetect=yes busycount=6 callprogress=no faxdetect=incoming channel => 1