Hi All,
Googling X100P Clone I found several information about these cards and seems
that some winmodem has the same chip used from the original X100P.
Here below a list winmodem which should work as X100P clone:
1057 Motorola
5608 SM56 PCI Fax Voice Modem
E159 Tiger Jet Network Inc
0001 Tiger 300/320 PCI interface
I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the
1057 Motorola Chip, and I installed it on my linux box.
in my /proc/pci list it is recognized like 1057:3052 (Motorola) (rev 4)., IRQ
11, I/O at 0x6c00 [0x6cff]
When I try to load the module wcfxo, I cannot load it (zaptel is already
loaded):
[root@Hayabusa misc]# modprobe wcfxo
/lib/modules/2.4.22/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod /lib/modules/2.4.22/misc/wcfxo.o failed
modprobe: insmod wcfxo failed
I cannot undertand if:
1) the message occours because the FXO card use the same IRQ of the VGA card
2) it occurs because the winmodem installed is not a valid FXO card.
Some one as experienced this kind of card?
Regards
MY PCI DEVICES:
[root@Hayabusa root]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=129.
Bus 0, device 7, function 0:
ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
Master Capable. Latency=64.
I/O at 0xf000 [0xf00f].
Bus 0, device 7, function 2:
USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
IRQ 11.
Master Capable. Latency=64.
I/O at 0x6400 [0x641f].
Bus 0, device 7, function 3:
Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 10, function 0:
Ethernet controller: 3Com Corporation 3c590 10BaseT [Vortex] (rev 0).
IRQ 10.
Master Capable. Latency=248. Min Gnt=3.Max Lat=8.
I/O at 0x6800 [0x681f].
Bus 0, device 13, function 0:
VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG [Mystique] (rev
2).
IRQ 11.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xe8000000 [0xe8003fff].
Prefetchable 32 bit memory at 0xe9000000 [0xe97fffff].
Non-prefetchable 32 bit memory at 0xea000000 [0xea7fffff].
Bus 0, device 14, function 0:
Modem: PCI device 1057:3052 (Motorola) (rev 4).
IRQ 11.
Master Capable. Latency=64. Min Gnt=1.Max Lat=62.
Non-prefetchable 32 bit memory at 0xeb000000 [0xeb000fff].
I/O at 0x6c00 [0x6cff].
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050305/bc973d10/attachment.htm