similar to: Asterisk system lock

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

Hi ! I am trying to configure two E100P cards, but I am a bit confused with zapta.conf in what I am trying to achieve. The * will be connected to a pstn switch with two E1 PRI lines. The E1 lines will be used for incoming calls as well as outgoing calls. My problem now is what to put in zapta.conf, I would like to group all channels from both cards together (if that's possible). Does this

We just had an interesting experience here. One of our AD servers was down for 90 minutes due to the server being physically moved to another location. This shouldn?t be a problem since there are 5 other AD servers in that ?group? that can take over the load. However it seems Samba (when used as a fileserver) for some reason is taking quite a long time to ?give up? on the first one and switch to

Hello, I have had several instances over the last month of Asterisk freezing, sometimes after 12 hours, sometimes after 8 days. The common elements are that: - all Zap channels lock[hangups don't register and no new calls in or out] - no new in/outbound calls can be made on Zap or SIP channels - people who are still connected to calls can continue to talk - in the CLI interface, you can

Hi All, I've bought a R2Adapter to convert R2Digital to ISDN. I am trying to config E100P card but D-Channel is down. I know R2Adapter uses ETSI ISDN Protocol so I tried unsucessfully setup switchtype to EuroISDN. Any clue? Daniel

hi see below's conversation. it seems the e100p card doesn't work with BT. Any idea how this'll work against Telenor (norway)? roy <RoyK> does anyone know if I can trust the E100P to do full PRI stuff in .no? <cypromis> dunno about no <cypromis> I cannot use it in UK <cypromis> cause the framer has problems with system-x switches at bt

For an inbound call center with 4 T1s and 30-50 agents on you would do just fine with a single, one-processor machine. We have handled more than this on a single P4 server although we use astGUIclient instead of Asterisk queues, but the load is very similar. I would recommend a Sangoma Quad T1 card because they are about 30% more efficient than Digium T1 cards. When you say that you need to

Greetings. Today I've installed a fresh new E100P on a EuroISDN PRI. It seems to work well, accepting calls, but, when I start *, I have the screen flooded with this message: PRI got event: 8 (or 6) If i look into /var/log/asterisk/messages i've this Error: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 35 failed: Unknown error 500 Repeated indefinitely. Also, i've a

Hello, We just had some new T1s turned up today to replace others that our contract has run out on and we are now getting more echo on the new T1 lines than we had on the old ones. The T1 type is 24-channel, D4/AMI SF Robbed-bit(the same as the T1s they replaced) The problem is that we are getting echo on about 10% of the calls in and out placed on these new T1s compared to less than 1% with

I've got a * box with a TDM40B and an E100P. The E1 is connected to a Shout900 VoIP gateway from net.com. My question is, when I place a call from an analog phone and that call is routed over the E1, what encoding is used? And do I have any control over that? I'm obviously not an expert here, but the Shout900 vendor is claiming that some difficulties that we are having with integration are

Hi, all I am trying to install E100P card, the 'modprobe zaptel' is ok, but when I did 'modprobe wct1xxp', I got such error, so can not load the driver for the card. /lib/modules/2.4.20-8/misc/wct1xxp.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog

Well I'm slowly learning my way around asterisk although as yet I haven't had the chance to actually hook the system up to an ISDN line. I am going to migrate from an Argent Office setup. My only problem is keeping costs down on the phones. The Argent system is running about 30 POTS phones. Can someone suggest the cheapest option? Should I get some kind of large scale FXS box or would

Hi, I currently have a E100P card installed on my machine and the E1 subscription will be activated pretty soon. However, I have no idea how to configure asterisk to make inbound and outbound call using the E1. Especially for extensions.conf. Below is the configuration I used for zaptel.conf and zapata.conf. Is it possible if someone can verify if the configuration for zaptel and zapata is

Hello, I have the following configuration : E100P -> * -> TDM400 -> Modem When I receive FAXes, about 20% of them are corrupted : pages are not always complete. If the fax is complex or with numerous pages, it's usually a mess. Before that, I was using spandsp with success. Unfortunately it's too picky with some broken fax (training failed). Since this failure only occurs with

Hi, Has anyone connected * to a Colt E1 line in Europe? If so could you send me the zaptel.conf and zapata.conf. Thanks, Aaron __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

Hello, I have an E100P, and in the zaptel.conf I have: span=1,1,0,ccs,hdb4,crc4,yellow fxsks=1-10 the light on the card is green( BTW what do all those states of the card that zttool reports YELLO, RED, BLUE ..., is there a doc for zttool?, or for the card?) in the asterisks` zapata.conf I have: [channels] context=default switchtype=euroisdn signalling=fxs_ks usecallerid=yes hidecallerid=no

Hi, some big files are regularily updated on server A. Rsync should sync that with Server B. If rsync starts in the middle of an upload process, will it copy that incomplete file to Server B? First tests showed it will. How can this be avoided? Comments on rsync-usage with big files and very active users would be very appreciated! Thanks! Peter

Hi, I'm installing E100P for isdn pri line. My configuration are like this. zaptel.conf ======================================= span=1,0,0,ccs,hdb3,crc4 loadzone = us defaultzone=us bchan=1-15 dchan=16 bchan=17-31 zapata.conf ================================================= [channels] context=default switchtype=euroisdn context=default signalling=pri_net usecallerid=yes

hello i upgraded wine from 3months old version to current one. and i noticed that my computer locks very often. the same application which run before now locks the computer completely (event SysRq button is not working) i can't find out what is wrong, there is nothing in syslogs... is here anyone with the same problem? maybe it is something on my computer but i doubt it (3months old