Hi,
Assuming that the problem *is not* soft settings I would recommend you to
verify that the channel mapping is the same in your adapter as in your
E100P. Some times they do not match, and the D channel does not arrive
where expected at each end.
As you said, just a clue.
Rgds
Sam\\\
----- Original Message -----
From: "Daniel Bichara" <daniel@bichara.com.br>
To: <asterisk-users@lists.digium.com>
Sent: Thursday, January 22, 2004 1:38 PM
Subject: [Asterisk-Users] ETSI PRI ISDN Signalling
> Hi All,
>
> I've bought a R2Adapter to convert R2Digital to ISDN. I am trying to
> config E100P card but D-Channel is down. I know R2Adapter uses ETSI ISDN
> Protocol so I tried unsucessfully setup switchtype to EuroISDN. Any
clue?
>
> Daniel
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users