Hi, Has anyone connected * to a Colt E1 line in Europe? If so could you send me the zaptel.conf and zapata.conf. Thanks, Aaron __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail
zaptel.conf span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=nl zone=de doesen't work correctly for me :( but nl does... zapata.conf switchtype=euroisdn pridialplan=unknown signalling=pri_cpe group = 1 channel => 1-15,17-31 context=incoming this is the base config that works with colt... the rest has to be configured to you needs... Regards Fabe On Sat, 17 Jul 2004 01:16:55 -0700 (PDT), Aaron Clauson <aza_rc@yahoo.com> wrote:> Hi, > > Has anyone connected * to a Colt E1 line in Europe? If > so could you send me the zaptel.conf and zapata.conf. > > Thanks, > > Aaron > > __________________________________ > Do you Yahoo!? > New and Improved Yahoo! Mail - Send 10MB messages! > http://promotions.yahoo.com/new_mail > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Here's our Colt snippet from zaptel.conf # loadzone=nl defaultzone=nl # # dit is de COLT E1 # span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 For zapata.conf we use: ; ; all COLT channels go in group 2 group=2 ; its a pri, connected to the network rxgain=0.0 txgain=0.0 signalling = pri_cpe ; ; calls goto default context=colt ; ; override some settings callerid=asreceived transfer=no ;busydetect=yes ; ; channel 16 is used for D channel info channel => 1-15 channel => 17-31 Good luck! Michiel Aaron Clauson wrote:>Hi, > >Has anyone connected * to a Colt E1 line in Europe? If >so could you send me the zaptel.conf and zapata.conf. > >Thanks, > >Aaron > > > >__________________________________ >Do you Yahoo!? >New and Improved Yahoo! Mail - Send 10MB messages! >http://promotions.yahoo.com/new_mail >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >
Hi, Thanks a lot for the configs Fabe. I tried your zaptel.conf but I still get yellow and red alarms in zttool and * is unable to create any Zap channels (as expected with yellow and red alarms). I realise I will now have to start talking to Colt (in Ireland) to try and get the line up and running but if anyone has encountered this or something similar with Colt, or another provider in Europe, any tips would be greatly appreciated. Thanks, Aaron>Message: 7 >Date: Sat, 17 Jul 2004 10:38:26 +0200 >From: Fabian Stelzer <fabeman@gmail.com> >To: asterisk-users@lists.digium.com >Subject: Re: [Asterisk-Users] E100P and Colt Telecom >(Europe) >Reply-To: asterisk-users@lists.digium.com > >zaptel.conf >span=1,0,0,ccs,hdb3,crc4 >bchan=1-15,17-31 >dchan=16 >loadzone=nl > >zone=de doesen't work correctly for me :( but nl >does... > >zapata.conf >switchtype=euroisdn >pridialplan=unknown >signalling=pri_cpe >group = 1 >channel => 1-15,17-31 >context=incoming > >this is the base config that works with colt... the >rest has to be >configured to you needs... > >Regards >Fabe__________________________________ Do you Yahoo!? Vote for the stars of Yahoo!'s next ad campaign! http://advision.webevents.yahoo.com/yahoo/votelifeengine/