similar to: Nortel PowerTouch 350

I was wondering if anyone has had any experience with PowerTouch 350 & ADSI. I am able to configure the phone with ADSI.. Which is pretty cool in it self. But I have a question regarding the Service feature. I have to choose the service button and choose the Asterisk PBX ADSI. But let's say I make a call it does not default back to this. I have to go back into Services and choose it

I know I heard people looking for inexpensive ADSI phones a while back. Can't vouch for these guys, but this looks like a reasonable deal for what perhaps are new phones. No experience with ADSI, myself, but thought I'd pass it along. These folks also carry the Nortel analog units that do intercom and 2-line, as has been discussed in prior threads. JT ---------------------

Wondering, since they appear to be plentiful on eBay, whether I could get a Nortel 350 to use to learn my way around ADSI. The vendor claims that these are "generic," and looking through the archives I wonder if that means that they might be unlocked in the sense that the word is meaningful to asterisk. Of course I am green as could be on this topic, so this question may even be a

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: siproxd.url Type: application/octet-stream Size: 82 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030507/bddd870b/siproxd.obj

I just need to buy 5-6 ADSI Phones. I wondering which of these models to choose - aastra 390 - I don't know is this an ADSI phone at all. Is there versions with and without ADSI - aastra 350 - I'm sure that it have ADSI. If there is some other good working model, it will be great, if someone points me. Thanks

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are

Hi All, as a followup to my previous posting (re: not getting caller id to display on a powertouch 350), I've found the following... If I hook the PT350 up to the PSTN line, caller id is diplayed properly... If I connect it to our CAS Acess Bank II, the 350 will not display incoming CID... If I hook up a cheap callerid enabled phone to the same port that the PT350 was on (on the AB II), the

Hi all, is anyone using the Aastra Powertouch 350 analog (adsi) phone with asterisk? I cannot get the phone to display incoming caller id... I can see the CID if I hook up a cheap caller id enabled phone... Only the PT350 is having problems. Looking all over for docs on this phone, but what I've found doesn't have any mention of a setting to display CID... Thx as always Dan

Hi Everyone, I've been in contact with a few members off list about this, and I still can't figure out what to do (aside from buying a more current ADSI compatibile screenphone). The problem is that I have a Locked Nortel Vista-350 phone and I cannot update the ADSI scripts. I have used the reset time/date trick, and then was able to partially upload the ADSI information to the

I have ADSI working on my Aastra (Vista/Nortel) 350 phone and everything is working fine. However, I want the asterisk.adsi to load into the 'self-load' slot but can't figure out what the correct FDN for doing this is. Does anyone know the right FDN for the SL slot on these phones? Also, does anyone have any cool/interesting ADSI scripts they wouldn't mind sharing? I'm

Can anyone recommend some phone sets that are adsi compliant and work well with asterisk?

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

Is anyone successfully using this phone with Asterisk? There is a lot mentioned about CISCO but nothing about Nortel... Alex.

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Hello, I am wondering if anyone is using the Nortel 2001 2002 or 2004 phones on their asterisk implementation. My local dealer says they are not compatible with any open source implementations. Is there a phone compatibility list somewhere? Cheers Cian

I am using asterisk 1.4.32 and wish to connect using SIP to a nortel 1000 switch with the ability to have 90 calls at a one time outgoing or incoming. the nortel reseller is asking me what to do. I dont know nortel at all. I thought I just needed a "SIP trunk and IP address of the their server and an account name, and provide her my IP address". They didn't know what to do with

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

Anyone interfaced * to the Nortel option 61c pbx via T1's, pri, etc? Need to begin planning the implementation, purchase cards, etc. Any recommended approaches, configuration problems, etc? Off-list is fine if you'd like. Rich radamson @ routers . com