similar to: X100P incoming calls - "hangup" delay

I've noticed that a few people here are from Australia. I'm wondering where you all get your hardware from. I'll probably order some of the X100P cards from Digium soon (and possibly some FXO cards), but for other things such as ATAs, etc. However - these obviously aren't ACA compliant. Does anybody know of compatible hardware (for POTS lines) that is ACA compliant? The cheapest

>Another option is Aastra's Ring Selectors. They can "split" a line into >multiple lines by ring cadence. > >http://www.aastra.com/Products/RingSelectors/index.html Don't you then have to wait 4 rings b4 an extension will get a * dial ? This devices must wait 2 rings to detect the cadence then * is gonna wait 2 rings trying to get CallerID which I think it will NEVER

Hi All... Is it possible to cause asterisk to answer some distinctive ring patterns but not others? I have a POTS line plugged into an X100P and I would like * to ignore one ring cadence that is answered by a fax machine. How would I do that? Thanks...

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi All, This isn't really a question, but it's an issue I experienced that was driving me crazy for a few days, so I thought it might be good for the archives. Basically what was happening was everytime a particular customer called (long distance), the line would disconnect immediately after answering. I thought it might have been the phone, so I swapped the phone with another - still

Hi.. I've got an asterisk setup with an X100P card installed.. I'm noticing that upon hangup, it takes a good 3 to 5 seconds before asterisk realizes the line has been hung up and drops the call.. this causes my SIP phone to continue ringing, and occassional phantom voice mail messages to be left.. I'm located in good old standard North America, with a regular Verizon residential

My home * system I use for test/dev stuff has recently started to miss all calls. I have two of the "X100P" boards from x100p.com that are about a year old in it. They both have worked in the past no problem. At some point in the past couple of weeks they both stopped answering the phone. I don't have a specific date because only I and a couple of other people call in on those

Hi to all, I've just received my Cisco 7905G ipphone. I want to connect it to asterisk server but it looks that it has been preloaded with sccp protocol, so I guess I need H.323 or SIP firmware image of some kind. I have a working tftp server on my asterisk box also....What do I need to do now to get things wokring? Thanx in advance, Victor...

Good afternoon all, I was wondering if anybody knows of a way to limit the number of calls going out over an interface (or respond with some sort of 'circuits-busy' message?) The reason I ask is my outgoing bandwidth is only 128kbit and if there are any more than 2 calls going over the internet interface the QoS is reduced dramatically for all calls. Failing that, does anybody know if

Hi all, This is my first post here - I started with Asterisk a few days ago and have "fallen in love" - fantastic product. I've only got softphones connected at the moment - I'll probably order the FXO/FXS cards in about a month (and then think about getting some hardware SIP phones). Our current phone system is quite a few years old and isn't growing with us (when a single

Is the X100P FXO PCI Card capable of detecting a fax, answering the call, and then emailing the fax content to an email address? Thanks. Paul.

Hi Gurus How do I make x100P does not answer incoming calls ? I want * play dead for incoming calls. I do not have any context for incoming calls from x100p, in zapata.conf. Call also get logged into the CDR, that too I do not want. I am using x100p for outgoing calls only. Any help appreciate. Cheers SW

I've configured my [*] to dial the pstn which is working like a charm. I've also configured an extension to ring when the PSTN line is ringing which is also working brilliantly, but, sometimes it doesn't detect that the call has been hungup. I've had a look on voip-info and checked the conf files but I can't see anything that I've missed. Cheers Matt

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup

Hello All, I have 4 X100P cards. I was hoping to have card (line) go to separate ext. i.e. Card 1 (XXX)555-0001 My Ext Card 2 (XXX)555-0002 Wife's Ext Card 3 (XXX)555-0003 Fax Ext Card 4 (XXX)555-0004 My and Wife Ext. This is what I have now and all incoming line rings this one extension. exten => s,1,Dial(SIP/300,10) So what is "s" . Thanks, David -- This message has been

Hi. I have sjphone installed on windows and working except for dtmf. I read the docs for sjphone and it uses inband dtmf. I configired dtmfmode=inband but it still does not recognize it. Someone on the lists said that inband only works using alaw or ulaw but i tried only allowing that too but still no go. Hmm.. any other ideas? I can't get any other client to work on windows :-/ I

Hello all, I know this isn't strictly Asterisk, but I'm sure that there are more people here using the Cisco 7960 w/ SIP, so I thought I'd post here. I've just bought a Cisco 7960 phone to use with Asterisk. It came with the CallManager image on it. I've got the 4.4 SIP images (P0S3-04-4-00). If I put "P0S3-04-4-00" in the OS79XX.TXT file, the phone downloads this

I have been experiencing hung up when answering incoming calls through x100p. NOTICE[1242768320]: chan_zap.c:4584 ss_thread: Got event 2 (ring/Answered).. -- Executing Wait("Zap/1-1","1") in new stack -- Executing Answer("Zap/1-1","") in new stack -- Executing DigitTimeout("Zap/1-1"."5") in new stack -- Set digit timeout to 5 --

install asterisk with x100p clone; the problem is that call me and hangup but the interface zap not detect the hangup and the line open. the error is : The 'reload' command is deprecated and will be removed in a future release. Please use 'module reload' instead. -- Reloading module 'chan_zap.so' (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf':