similar to: Tor2 modprobe problem

Hi list, I have a asterisk box with an E400P that was running ok until last week. The machine just stop responding and after a reboot, the module (tor2) doesn't load anymore. anyone could help? regards Eduardo modprobe returns this: asterix:~# modprobe tor2 Zapata Telephony Interface Registered on major 196 Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xfe121800/0xfe121000 irq 7

Hi! I have just bought the X100P and TDM400P cards to install on my computer to implement the PBX. I also downloaded the newest softwares asterisk_ver0.5.0, libpri_ver0.4.0, and zaptel_ver0.7.0) to install on my computer (Red Hat Linux 8.0). All packages are compiled well. When I use "modprobe" to load drivers (modprobe zaptel, modprobe wcfxo, modprobe wcfxs), the first two (zaptel,

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

Hi, I got my TDM11B and am trying to get it to work on my PC. However, I'm having difficulty getting the wcfxs driver to load. I've Googled this problem, and while there are others who have ran into the same problem, none of the solutions work for me. I would very much appreciate it if you could suggest things I could try to resolve this problem. Details follow. The PC is somewhat

Hi all... I did some Google searches and didn't find any info on this so I'm posting it here... if this was recently discussed, I apologize for the duplication -- please point me to the appropriate thread. System Description: Supermicro SuperServer 5015M-MF w/ PDSMi Motherboard Intel Pentium 4 2.8 Ghz CPU 2 GB DDR2 Memory Digium T400P 4 Port T1 Card CentOS 5.1 (Final) Kernel:

Hello all After install the Asterisk, setup the configuration file in the sip.conf and extensions.conf and type "asterisk" with start program. I don't have line card yet. But I found following error in the /var/log/messages. localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: Input/output error localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod

Thanks in advance root@asterisk01:~# modprobe wcfxo /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o

i have error in install module of tor2. but it compile good. what happen ? ivr2:/usr/src/zaptel # make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f gendigits tones.h rm -f libtonezone* rm -f tor2ee rm -f core cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o

Hi All, I have the problem setting up TDM22B card. Steps what I have followed are: [1] compiled zaptel-1.0.9.2 & installed the same. [2] modprobe wcfxo /lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg

Hello- I've been trying to scour both * and linux user group archives for a solution to this particular problem, but I am just plan stuck. I got the latest zaptel sources from cvs, uncommented ztdummy.o in Makefile, ran make; make install then, did depmod -a. All is well up until now. When i do modprobe ztdummy, i get this error: dv@sidetrack:/usr/local/src/zaptel# depmod -a

We use dual Athlon machines with up to three T400P 4-span T1 cards. If I have more than one stick of memory (2 1GB modules or 2 512K modules, each identical), I'm getting a panic soon after I modprobe the tor2 driver. I just loaded the latest from CVS and I'm still getting the panics, which look in part like: Apr 16 14:42:28 test71 kernel: wait_on_irq, CPU 0: Apr 16 14:42:44 test71

I've been having trouble with a TDM10B that I installed a few days ago. At first I could not modprobe it at all (getting the errors below). I switched the X100P that was also installed (with a Motorola chip) with one with a Tiger-something chip, and then everything starts up okay. However, after a few hours, the FXS port dies (no battery or anything), and if I try to rmmod & modprobe

Hello all, I'm trying to setup a AVM C2 card. I have read the kernel requirements for this card. <M> CAPI2.0 support [*] Verbose reason code reporting (Kernel size +=7K) [*] CAPI2.0 Middleware support (EXPERIMENTAL) <M> CAPI2.0 /dev/capi support [*] CAPI2.0 filesystem support <M> CAPI2.0 capidrv interface support My problem is when I make a "make

Hi, I have just begun working with TDMoE running between 2 fiber nics the dynamic span works great. In my main asterisk box's startup file I just 'modprobe tor2', then start asterisk. The zaptel, ztdynamic & ztd-eth modules all load by themselves when tor2 is loaded. If I stop asterisk then 'modprobe -r tor2' the tor2 module is removed but the other three remain. If I

Hello, I'm running Fedora Core 3 with udev, and asterisk/zaptel/libpri from cvs. I have followed the README.udev instructions replacing insmod with modprobe and rmmod with modprobe -r and adding the 60-zaptel.rules file, yet no matter what I do I still get this error on boot(or when I run service zaptel restart): [root@pbx ~]# /etc/init.d/zaptel restart Unloading zaptel hardware drivers:

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq numdevs=1", the system returns - imq.o: init_module: Device or resource busy the transcript is below - [root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource busy

--- configure.ac | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-) diff --git a/configure.ac b/configure.ac index da03c9f..7606bca 100644 --- a/configure.ac +++ b/configure.ac @@ -68,7 +68,8 @@ dnl For ArchLinux handler. AC_CHECK_PROG(PACMAN,[pacman],[pacman],[no]) dnl Required programs, libraries. -AC_PATH_PROG([INSMODSTATIC],[insmod.static],[no])

# uname -r 2.4.21-20.ELsmp [root@hp2620-2 root]# rpm -qa | grep ocfs ocfs-tools-1.0.10-1 ocfs-support-1.0.10-1 ocfs-2.4.21-EL-1.0.13-1 [root@hp2620-2 root]# /sbin/load_ocfs /sbin/insmod ocfs node_name=hp2620-2-eth1 ip_address=10.1.2.101 cs=1913 guid=8D65C7CEECF9EBE638BD0013215BD6E9 comm_voting=1 ip_port=7000 insmod: ocfs: no module by that name found load_ocfs: insmod failed [root@hp2620-2 root]#

Hi all i need urgent help our entire switchboard is down only 5 days after it came up. this is the second time this has happened and i am thinking that asterisk is not worth the trouble it gives. mostly it runs without hassle. but around 2 weeks ago during the test phase we rebooted the machine and did the normal modprobes and this error popped up. coming back to work after the weekend the

Hi All I've bought a TDM400P and need some help with configuration. Can you tell me what to do ? I've tried to install and the message below has appeared: [root@voip asterisk]# modprobe zaptel [root@voip asterisk]# modprobe wcfxo /lib/modules/2.4.22-1.2115.nptl/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid