hi all, i have applied all patches and compiled the kernel (2.4.21), iptables
(1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq
numdevs=1", the system returns - imq.o: init_module: Device or resource
busy
the transcript is below -
[root@vmlinux project]# modprobe imq numdevs=1
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource
busy
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed
/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed
what could be wrong? thanks all,
bye
joseph
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
even if imq is quite useless right now this eeror is caused probably by other loaded modules for userspace queue nf_queue probably since imq uses the same function ----- Original Message ----- From: "tc" <tc@me.net.ng> To: <lartc@mailman.ds9a.nl> Sent: Monday, January 26, 2004 1:33 AM Subject: [LARTC] IMQ Runtime error> hi all, i have applied all patches and compiled the kernel > (2.4.21), iptables > (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run ''"''modprobeimq> numdevs=1''"'', the system returns - imq.o: init_module: Device or resourcebusy> > the transcript is below - > > [root@vmlinux project]# modprobe imq numdevs=1 > /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device orresource> busy > Hint: insmod errors can be caused by incorrect module parameters,including> invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod > /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed > /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed > > what could be wrong? thanks all, > bye > joseph > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Roy wrote:> even if imq is quite useless right nowI thought it was OK for inbound traffic. What sort of load/traffic do you see crashes with. I have an old P200 as a gateway and can run bittorrents on it, with IMQ doing outbound for locally generated traffic (not that I really need to) and can do > a gig/day without ever crashing. I do close down at night though, and only have 256/512 bandwidth. Is this way below what you need to do to crash?> this eeror is caused probably by other loaded modules for userspace queue > nf_queue probably > since imq uses the same functionYea this is a pain, I would like to run a userspace for up and IMQ for down, but can''t use lib_ipq at the same time as IMQ. It has been suggested that I can work round this, but I haven''t tried yet. Do you think it''s possible? Andy.> ----- Original Message ----- > From: "tc" <tc@me.net.ng> > To: <lartc@mailman.ds9a.nl> > Sent: Monday, January 26, 2004 1:33 AM > Subject: [LARTC] IMQ Runtime error > > > >>hi all, i have applied all patches and compiled the kernel >>(2.4.21), iptables >>(1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run ''"''modprobe > > imq > >>numdevs=1''"'', the system returns - imq.o: init_module: Device or resource > > busy > >>the transcript is below - >> >>[root@vmlinux project]# modprobe imq numdevs=1 >>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or > > resource > >>busy >>Hint: insmod errors can be caused by incorrect module parameters, > > including > >>invalid IO or IRQ parameters. >> You may find more information in syslog or the output from dmesg >>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod >>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o failed >>/lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: insmod imq failed >> >>what could be wrong? thanks all, >>bye >>joseph >>_______________________________________________ >>LARTC mailing list / LARTC@mailman.ds9a.nl >>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >> > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/