thr3ads.net - asterisk users - [Asterisk-Users] insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.) [Jul 2003]

If this information is useful, please help other people find it:
Share via:

mvickers@real.com

2003-Jul-14 22:14 UTC

[Asterisk-Users] insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

Thanks in advance

root@asterisk01:~# modprobe wcfxo
/lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device
/lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o
failed
/lib/modules/2.4.20/misc/wcfxo.o: insmod wcfxo failed
root@asterisk01:~#



root@asterisk01:~# cat /etc/zaptel.conf |grep -v "#"

span=1,1,0,esf,b8zs
dynamic=eth,eth0/00:02:b3:35:43:9c,24,0
e&m=1-24
loadzone = us
defaultzone=us
root@asterisk01:~#

BTW what the hell is the line "dynamic="  ;-)


root@asterisk01:~# cat /etc/asterisk/zapata.conf |grep -v ";"

[channels]
context=default
switchtype=national
signalling=em_w
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

root@asterisk01:~#

root@asterisk01:~# cat /etc/modules.conf
options torisa base=0xd0000
alias char-major-196 torisa
post-install tor2 /sbin/ztcfg
post-install wcfxo /sbin/ztcfg
post-install wct1xxp /sbin/ztcfg
post-install wcfxs /sbin/ztcfg
post-install wcfxsusb /sbin/ztcfg
post-install torisa /sbin/ztcfg
post-install wct4xxp /sbin/ztcfg
root@asterisk01:~#


root@asterisk01:~# lsmod
Module                  Size  Used by    Not tainted
zaptel                179712   0  (unused)
ppp_generic            15776   0  [zaptel]
slhc                    4384   0  [ppp_generic]
root@asterisk01:~#
root@asterisk01:~#


root@asterisk01:~# cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
Controller Hub] (rev 3).
  Bus  0, device   1, function  0:
    VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset
Graphics Controller] (rev 3).
      IRQ 11.
      Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
      Non-prefetchable 32 bit memory at 0xffa80000 [0xffafffff].
  Bus  0, device  30, function  0:
    PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
      Master Capable.  No bursts.  Min Gnt=2.
  Bus  0, device  31, function  0:
    ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
  Bus  0, device  31, function  1:
    IDE interface: Intel Corp. 82801AA IDE (rev 2).
      I/O at 0xffa0 [0xffaf].
  Bus  0, device  31, function  2:
    USB Controller: Intel Corp. 82801AA USB (rev 2).
      IRQ 10.
      I/O at 0xef80 [0xef9f].
  Bus  0, device  31, function  3:
    SMBus: Intel Corp. 82801AA SMBus (rev 2).
      IRQ 9.
      I/O at 0xefa0 [0xefaf].
  Bus  1, device   1, function  0:
    Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
      IRQ 10.
      Master Capable.  Latency=64.  Min Gnt=8.Max Lat=56.
      Non-prefetchable 32 bit memory at 0xff8fe000 [0xff8fefff].
      I/O at 0xdf00 [0xdf3f].
      Non-prefetchable 32 bit memory at 0xff700000 [0xff7fffff].
  Bus  1, device   9, function  0:
    Network controller: Tiger Jet Network Inc. Model 300 128k (rev 0).
      IRQ 9.
      Master Capable.  Latency=64.  Min Gnt=1.Max Lat=128.
      I/O at 0xd800 [0xd8ff].
      Non-prefetchable 32 bit memory at 0xff8ff000 [0xff8fffff].
root@asterisk01:~#



root@asterisk01:~#
root@asterisk01:~# cat /proc/interrupts
           CPU0
  0:     163838          XT-PIC  timer
  1:          2          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
 10:       7553          XT-PIC  eth0
 14:       3349          XT-PIC  ide0
NMI:          0
LOC:     163790
ERR:          0
MIS:          0
root@asterisk01:~#


Thanks again!


Mark Vickers, RealNetworks Inc.  Desk: (206) 674-2391  Fax: (206)674-3588

mvickers@real.com

2003-Jul-14 22:28 UTC

head link

[Asterisk-Users] Re: insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

also output of ztcfg...

root@asterisk01:~# ztcfg -vvv

Zaptel Configuration
=====================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Dynamic span 1: driver eth, addr eth0/00:02:b3:35:43:9c, channels 24,
timing 0

Channel map:

Channel 01: E & M (Default) (Slaves: 01)
Channel 02: E & M (Default) (Slaves: 02)
Channel 03: E & M (Default) (Slaves: 03)
Channel 04: E & M (Default) (Slaves: 04)
Channel 05: E & M (Default) (Slaves: 05)
Channel 06: E & M (Default) (Slaves: 06)
Channel 07: E & M (Default) (Slaves: 07)
Channel 08: E & M (Default) (Slaves: 08)
Channel 09: E & M (Default) (Slaves: 09)
Channel 10: E & M (Default) (Slaves: 10)
Channel 11: E & M (Default) (Slaves: 11)
Channel 12: E & M (Default) (Slaves: 12)
Channel 13: E & M (Default) (Slaves: 13)
Channel 14: E & M (Default) (Slaves: 14)
Channel 15: E & M (Default) (Slaves: 15)
Channel 16: E & M (Default) (Slaves: 16)
Channel 17: E & M (Default) (Slaves: 17)
Channel 18: E & M (Default) (Slaves: 18)
Channel 19: E & M (Default) (Slaves: 19)
Channel 20: E & M (Default) (Slaves: 20)
Channel 21: E & M (Default) (Slaves: 21)
Channel 22: E & M (Default) (Slaves: 22)
Channel 23: E & M (Default) (Slaves: 23)
Channel 24: E & M (Default) (Slaves: 24)

24 channels configured.

ZT_SPANCONFIG failed on span 1: No such device or address (6)
root@asterisk01:~#

Mark Vickers, RealNetworks Inc.  Desk: (206) 674-2391  Fax: (206)674-3588

On Mon, 14 Jul 2003 mvickers@real.com wrote:
>
> Thanks in advance
>
> root@asterisk01:~# modprobe wcfxo
> /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device
> /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by
> incorrect module parameters, including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o
> failed
> /lib/modules/2.4.20/misc/wcfxo.o: insmod wcfxo failed
> root@asterisk01:~#
>
>
>
> root@asterisk01:~# cat /etc/zaptel.conf |grep -v "#"
>
> span=1,1,0,esf,b8zs
> dynamic=eth,eth0/00:02:b3:35:43:9c,24,0
> e&m=1-24
> loadzone = us
> defaultzone=us
> root@asterisk01:~#
>
> BTW what the hell is the line "dynamic="  ;-)
>
>
> root@asterisk01:~# cat /etc/asterisk/zapata.conf |grep -v ";"
>
> [channels]
> context=default
> switchtype=national
> signalling=em_w
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
>
> immediate=no
>
> root@asterisk01:~#
>
> root@asterisk01:~# cat /etc/modules.conf
> options torisa base=0xd0000
> alias char-major-196 torisa
> post-install tor2 /sbin/ztcfg
> post-install wcfxo /sbin/ztcfg
> post-install wct1xxp /sbin/ztcfg
> post-install wcfxs /sbin/ztcfg
> post-install wcfxsusb /sbin/ztcfg
> post-install torisa /sbin/ztcfg
> post-install wct4xxp /sbin/ztcfg
> root@asterisk01:~#
>
>
> root@asterisk01:~# lsmod
> Module                  Size  Used by    Not tainted
> zaptel                179712   0  (unused)
> ppp_generic            15776   0  [zaptel]
> slhc                    4384   0  [ppp_generic]
> root@asterisk01:~#
> root@asterisk01:~#
>
>
> root@asterisk01:~# cat /proc/pci
> PCI devices found:
>   Bus  0, device   0, function  0:
>     Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
> Controller Hub] (rev 3).
>   Bus  0, device   1, function  0:
>     VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset
> Graphics Controller] (rev 3).
>       IRQ 11.
>       Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
>       Non-prefetchable 32 bit memory at 0xffa80000 [0xffafffff].
>   Bus  0, device  30, function  0:
>     PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
>       Master Capable.  No bursts.  Min Gnt=2.
>   Bus  0, device  31, function  0:
>     ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
>   Bus  0, device  31, function  1:
>     IDE interface: Intel Corp. 82801AA IDE (rev 2).
>       I/O at 0xffa0 [0xffaf].
>   Bus  0, device  31, function  2:
>     USB Controller: Intel Corp. 82801AA USB (rev 2).
>       IRQ 10.
>       I/O at 0xef80 [0xef9f].
>   Bus  0, device  31, function  3:
>     SMBus: Intel Corp. 82801AA SMBus (rev 2).
>       IRQ 9.
>       I/O at 0xefa0 [0xefaf].
>   Bus  1, device   1, function  0:
>     Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
>       IRQ 10.
>       Master Capable.  Latency=64.  Min Gnt=8.Max Lat=56.
>       Non-prefetchable 32 bit memory at 0xff8fe000 [0xff8fefff].
>       I/O at 0xdf00 [0xdf3f].
>       Non-prefetchable 32 bit memory at 0xff700000 [0xff7fffff].
>   Bus  1, device   9, function  0:
>     Network controller: Tiger Jet Network Inc. Model 300 128k (rev 0).
>       IRQ 9.
>       Master Capable.  Latency=64.  Min Gnt=1.Max Lat=128.
>       I/O at 0xd800 [0xd8ff].
>       Non-prefetchable 32 bit memory at 0xff8ff000 [0xff8fffff].
> root@asterisk01:~#
>
>
>
> root@asterisk01:~#
> root@asterisk01:~# cat /proc/interrupts
>            CPU0
>   0:     163838          XT-PIC  timer
>   1:          2          XT-PIC  keyboard
>   2:          0          XT-PIC  cascade
>  10:       7553          XT-PIC  eth0
>  14:       3349          XT-PIC  ide0
> NMI:          0
> LOC:     163790
> ERR:          0
> MIS:          0
> root@asterisk01:~#
>
>
> Thanks again!
>
>
> Mark Vickers, RealNetworks Inc.  Desk: (206) 674-2391  Fax: (206)674-3588
>

Steven Critchfield

2003-Jul-14 22:57 UTC

head link

[Asterisk-Users] insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

Time for lots of knowledge transfer.

On Tue, 2003-07-15 at 00:14, mvickers@real.com wrote:> Thanks in advance
> 
> root@asterisk01:~# modprobe wcfxo
> /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device
> /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by
> incorrect module parameters, including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o
> failed
> /lib/modules/2.4.20/misc/wcfxo.o: insmod wcfxo failed
> root@asterisk01:~#
> 
> 
> 
> root@asterisk01:~# cat /etc/zaptel.conf |grep -v "#"
This is a very wasteful and not always going to work correctly command.
There is no need to use cat when grep will work by itself. Next config
lines can have comments on them, and your pattern will eliminate them
from your listing. So you should really do something like...
grep -v '^#' /etc/zaptel.conf
This will just get rid of lines beginning with the comment delimiter.
You might want to add a grep in the pipeline after that that looks for a
alpha character so you can eliminate empty lines. So try using
grep -v '^#' /etc/zaptel.conf | grep '[a-zA-Z0-9]' 
> span=1,1,0,esf,b8zs
> dynamic=eth,eth0/00:02:b3:35:43:9c,24,0
> e&m=1-24
> loadzone = us
> defaultzone=us
> root@asterisk01:~#
> 
> BTW what the hell is the line "dynamic="  ;-)
dynamic is a way to do TDM phone signaling over ethernet. If you don't
have a T1 interface, you don't need the span line. Also, I think it has
been mentioned on the list, e&m isn't supported on the analog
interfaces. From the looks of the output below, you have a single X100P
or X101P card, and only need to specify the 1 channel as FXO. 
> root@asterisk01:~# cat /etc/asterisk/zapata.conf |grep -v ";"
Same lesson as above goes here.
> [channels]
> context=default
> switchtype=national
> signalling=em_w
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> 
> immediate=no
You need to have a channel definition. Of course it may have been
excluded by the grep you used.
> root@asterisk01:~#
> 
> root@asterisk01:~# cat /etc/modules.conf
> options torisa base=0xd0000
> alias char-major-196 torisa
> post-install tor2 /sbin/ztcfg
> post-install wcfxo /sbin/ztcfg
> post-install wct1xxp /sbin/ztcfg
> post-install wcfxs /sbin/ztcfg
> post-install wcfxsusb /sbin/ztcfg
> post-install torisa /sbin/ztcfg
> post-install wct4xxp /sbin/ztcfg
> root@asterisk01:~#
> 
> 
> root@asterisk01:~# lsmod
> Module                  Size  Used by    Not tainted
> zaptel                179712   0  (unused)
> ppp_generic            15776   0  [zaptel]
> slhc                    4384   0  [ppp_generic]
> root@asterisk01:~#
> root@asterisk01:~#
> 
> 
> root@asterisk01:~# cat /proc/pci
This is more useful if you use the command lspci.
> PCI devices found:
>   Bus  0, device   0, function  0:
Now for the fix you need, try placing the card in a different PCI slot.
This card can be finicky about it's environment.
-- 
Steven Critchfield <critch@basesys.com>

Possibly Parallel Threads

Search for more possibly parallel threads

asterisk users - Jul 2003 - insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

[Asterisk-Users] insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

[Asterisk-Users] Re: insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

[Asterisk-Users] insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

Possibly Parallel Threads