asterisk users - Oct 2003 - After start Asterisk, error foung in the messages log file

Hello all

After install the Asterisk, setup the configuration file in the 
sip.conf and extensions.conf and type "asterisk" with start program.
I don't have line card yet.

But I found following error in the /var/log/messages.

  localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: 
Input/output error
  localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod char-
major-196 failed  

(Log)
localhost kernel: CSLIP: code copyright 1989 Regents of the University 
of California
  localhost kernel: PPP generic driver version 2.4.2
  localhost kernel: Zapata Telephony Interface Registered on major 196
  localhost kernel: No ISA tormenta card found at d0000
  localhost kernel: Zapata Telephony Interface Unloaded

  localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: 
Input/output error
  localhost insmod: Hint: insmod errors can be caused by incorrect 
module parameters, including invalid IO or IRQ parameters.       You may 
find more information in syslog or the output from dmesg
  localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod char-
major-196 failed
  localhost kernel: CSLIP: code copyright 1989 Regents of the University 
of California
  localhost kernel: PPP generic driver version 2.4.2
  localhost kernel: Zapata Telephony Interface Registered on major 196
  localhost kernel: No ISA tormenta card found at d0000
  localhost kernel: Zapata Telephony Interface Unloaded
  localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: 
Input/output error
  localhost insmod: Hint: insmod errors can be caused by incorrect 
module parameters, including invalid IO or IRQ parameters.       You may 
find more information in syslog or the output from dmesg
  localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod char-
major-196 failed
(/Log)

I cannot start the asterisk.
Do yuo have any suggestion for me?

Look in /etc/asterisk, for a zapata.conf file. Rename it, for now, since you
don't have a line card.

You probably only need these files to get started:

sip.conf (for voip phones)
extensions.conf (dialing rules, extensions)
asterisk.conf (basic this is where things are file)
voicemail.conf (mailboxes)

Run asterisk like this: asterisk -vvvc

That will cause it to run in the foreground as an app you can interact with, and
see the errors as they're happening.

-----
Andrew Thompson

----- Original Message ----- 
From: "Hashey" <hashimoto@bmc-j.net>
To: <Asterisk-Users@lists.digium.com>
Sent: Sunday, October 26, 2003 10:53 PM
Subject: [Asterisk-Users] After start Asterisk, error foung in the messages log
file

> Hello all
> 
> After install the Asterisk, setup the configuration file in the 
> sip.conf and extensions.conf and type "asterisk" with start
program.
> I don't have line card yet.
> 
> But I found following error in the /var/log/messages.
> 
>   localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: 
> Input/output error
>   localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod char-
> major-196 failed  
> 
> (Log)
> localhost kernel: CSLIP: code copyright 1989 Regents of the University 
> of California
>   localhost kernel: PPP generic driver version 2.4.2
>   localhost kernel: Zapata Telephony Interface Registered on major 196
>   localhost kernel: No ISA tormenta card found at d0000
>   localhost kernel: Zapata Telephony Interface Unloaded
> 
>   localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: 
> Input/output error
>   localhost insmod: Hint: insmod errors can be caused by incorrect 
> module parameters, including invalid IO or IRQ parameters.       You may 
> find more information in syslog or the output from dmesg
>   localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod char-
> major-196 failed
>   localhost kernel: CSLIP: code copyright 1989 Regents of the University 
> of California
>   localhost kernel: PPP generic driver version 2.4.2
>   localhost kernel: Zapata Telephony Interface Registered on major 196
>   localhost kernel: No ISA tormenta card found at d0000
>   localhost kernel: Zapata Telephony Interface Unloaded
>   localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: 
> Input/output error
>   localhost insmod: Hint: insmod errors can be caused by incorrect 
> module parameters, including invalid IO or IRQ parameters.       You may 
> find more information in syslog or the output from dmesg
>   localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod char-
> major-196 failed
> (/Log)
> 
> I cannot start the asterisk.
> Do yuo have any suggestion for me?
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>