Displaying 20 results from an estimated 5000 matches similar to: "best ISDN BRI solution for DID"
2004 Aug 19
7
Where to purchase ISDN (BRI) cards in Australia (preferably)
Hello all,
I was wondering if anybody knows where one might obtain a PCI ISDN
card supporting a single BRI for use with Asterisk in Australia (and
using something like chan_capi).
Because of the Isdn4Linux DTMF issue, I don't want one of those cards.
I've already spent too much time messing about with my current card.
I'm after something like the AVM Fritz! cards. I found one place
2003 Sep 21
3
ISDN BRI hardware
Hi,
Anybody have lots of experience with PCI ISDN cards and Asterisk? I'm
thinking of getting a BRI in my house to deliver more advanced signaling to
my PBX (yes, I'm a geek :-)) but I've never played with isdn4linux.
Is there any particular BRI card that works better with Asterisk than any
other?
Also, can the BRI interface cards participate in conference, etc., since
they
2003 Apr 21
2
Eicon BRI-card
Hello,
I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux.
In the modem.conf file i have put following:
-----------
[interfaces]
; By default, incoming calls should come in on the "remote" context
context=remote
; Modem Drivers to load
driver=i4l
; Type of dialing
2003 Nov 08
5
Eicon Diva Server 4BRI
Hi Everybody,
Has anybody tried the above (or indeed any other 4XBRI cards) successfully
with Asterisk. As far as I can see the above mentioned card is an active
ISDN card but supported by it's own I4L driver. This leads to interesting
questions particularly regarding echo cancellations (which usually doesn't
work on the cheap passive cards with one exception as far as I can see).
2004 Jun 06
2
BRI In the states
Hi all.
I've ordered a TDM400P with 4 FXO, but after using my X100P I'm thinking
about returning the TDM400P because of bad echo issues. If I do get the
echo issues I'll look at digital options.
My question: Is anyone using ISDN (BRI) in the states? I've heard
ISDN4LINUX devices suffer bad echo but chan_capi works great. All the
chan_capi cards I find though are for overseas
2004 Dec 06
3
Recomended ISDN for Asterisk ?
Hi
I have installed the http://asteriskathome.sourceforge.net/ with a
Digium card with no problems, very good !
Now I want to install my Billion PCI ISDN card (HFC based) in TE mode.
I get a little confused with Isdn4Linux, ZapHFC HIAX and the need to
install Capi !
Please suggest best and easiest approach ?
Thank you !
HB
Norway
2004 Apr 26
3
dtmf tone clamping in calls to external ivr
Hello,
I'm having trouble working out how to send DTMF tones to an external
IVR. My system has an analog phone connected to a TDM400P card, a SIP
software phone (Zultys LIPZ4) and is connected to a BRI in Australia
with a NETjet-S card. I'm using ISDN4Linux and a 2.4.25 kernel patched
with the ISDN audio patch from Traverse (which allows the card to do
voice).
DTMF works fine between
2004 Sep 27
3
chan_capi, Eicon Diva server BRI, kernel 2.6?
Hi list,
Does chan_capi work with kernel 2.6? The Eicon Diva server card loads
fine judging from /var/log/messages but Asterisk gives an error when
trying to load the chan_capi module. I'm using chan_capi-0.3.5,
zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with
kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a
msg that may be related and don't know
2003 Sep 02
9
ISDN
Hi,
I am using a Netjet-s ISDN Card, and am having some trouble dialling out
(Incoming Works Fine).
TRUNK=Modem/ttyI0
exten => _90XXXXXXXXX,1,Dial(${TRUNK}/${EXTEN:1}||Ttm)
exten => _90XXXXXXXXX,2,Congestion
I get the following when diallingout:
-- Starting simple switch on 'Zap/2-1'
-- Executing Dial("Zap/2-1", "Modem/ttyI0/04XXXXXXXX||Ttm") in new
2006 Jan 31
7
Interface card for Euro-ISDN (BRI)
Hi,
I'm looking for an interface card for termination of Euro-ISDN2 (BRI)
lines.
That is ISDN lines from the telco into my Asterisk box.
Any recommendations, good/bad expiriences ?
At present I'm looking at cards from BeroNet and Junghanns.
Cheers,
John
Faroese Telecom
2003 Nov 03
1
isdn, modem, etc.
I see many posts about using ISDN cards and modem cards.
Does this mean I can use a regular modem (that supports voice) as an
FXS, or FXO ?
If so, can you provide an example.
It might be the easiest way to test Asterisk's collaboration with the
PSTN (or analog phones) and provide proof of concept to non-believers.
Thanks.
Shoval
-------------- next part
2004 Jun 15
3
Outgoing DTMF when using BRI & i4l (Eicon Diva) - problems
Hello all,
This afternoon I had a BRI line installed by Telstra (our telco in
Australia). I'm using an Eicon Diva 2.02 PCI ISDN card with the isdn4linux
driver.
Incoming and outgoing calls with Asterisk work fine (and with no echo - my
main reason for getting ISDN). However, I can't seem to get outgoing DTMF
working (incoming works fine).
I made a call from my desk phone (Cisco 7940G)
2006 Apr 21
7
some EICON Diva 4BRI questions
Hi!
I have some (short) question about the Eicon DIVA (V-)4BRI cards I want
to have (short) answered before buying the DIVA card. I know there are
several Eicon guys active on the list, thus I ask on the list instead of
directly to Eicon so that all other will benefit as well.
1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
2. Can the clock (master/slave) be configured independent
2003 Nov 06
2
ISDN PBX + IVR + Voicemail Configuration - Sanity Check ...
Hi All,
First of all, please no flames about the footer of this message. It's being
inserted into all outgoing email by the server here without asking me
personally first once I send out email. Since I've been very interested in
setting up an Asterisk PBX + IVR + Voicemail system to support a small
business and a foundation for quite some time now, in order to replace their
current ISDN
2004 Jan 16
7
CAPI not installed, after changed from i4l to CAPI
I had unexpected hangups from my asterix box using the i4l driver. (SIP
<-> SIP calls worked execellent, but SIP<->ISDN didn't.)
Then I changed the i4l driver in modem.conf with the chan_capi from
jungham. (http://www.junghanns.net/asterisk)
I followed his instructions in the INSTALL file, and first encountered
some errors compiling it. It help by deinstalling several
2005 Jan 10
1
Digi Datafire Micro V ISDN Card
Hi to everyone!
I am new to this list and i want to greet you all!
I am trying to install Asterisk on a Fedora Core 3 Distribution with a
Digi Datafire Micro V ISDN Card.
I know that I have to use the ISDN4Linux so in modem.conf I set the I4l
driver ,the msn and device.
Modem.conf
[interfaces]
context=remote
;driver=aopen ; modem by AOpen
driver=i4l ; isdn4linux - an
2003 Mar 08
7
IAX on windows
I know this has come up before but...
Has anyone done anything to get an IAX client built on Windows?
I thought someone had started one, but I haven't heard anything about it
since - and that was months ago?
Anyone have any idea what the status is?
--
Ron Gage - Saginaw, Michigan
I am looking for work - resume at http://www.rongage.org/resume.doc
Electrical Engineering, Linux Programming,
2003 Jun 04
2
chan_capi with avm c2 only uses one BRI
hi all
it seems like whatever I do, I can't use more than 1 BRI on my AVM C2 with
chan_capi. Both channels seem to work, but not at the same time. And - yes -
they're connected to different NT boxes :)
Any ideas? kapejod?
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356
Computers are like air conditioners.
They stop working when you open
2003 Aug 21
1
Status of ISDN && DTMF (AFAIK): Please add corrections and comments
In this message I try to summarize what I have learned in these last two weeks. My primary sources of informations were the * list archives and linux ISDN docs. I ain't no * master, so don't trust too hard.
Relevant messages from the * list for the current discussion are: 009177.html 009268.html 0498.html 0849.html
My setup is an Eicon Diva (HiSax: Eicon.Diehl Diva driver Rev. 1.1.4.2)
2003 May 22
6
OT: BRI ISDN question
I am going to try and use a passive AVM fritz BRI card for my * setup..
Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels..
According to the BT website in order to use the hunt grouping across