similar to: two computers set up ... now what???

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

Hi All, I know, IAX is NAT friendly, but... I have a problem running gnophone from a box behind NAT firewall. I can register gnophone with * through NAT, but when I try to make a call it instantly disconnects. CLI iax show peers command tells me that peer is unreachable. However this peer is registred. Gnophone also tells me that it is registred. It seems that registration handshake has

So I have an X100P, and a TDM10B both working (at least I think they are). The drivers have been loaded and ztcfg -vv shows no errors in the configuration of two channels. When I run asterisk -vvvc and pick up my phone (plugged into TDM10B), I don't gear a dialtone. in phone.conf, I have [interfaces] mode=dialtone format=slinear ... Shouldn't that produce a dialtone when I pick up the

*** Now you just need a "phone" or "station" (FXS) device and a method of connecting it. *** So... essentially I need to spend another $125 US on a Wildcard TDM400P so I can plug in an analog phone? On the X100P description it says: "The X100P supports FXS Loopstart and "Kewlstart" (Loopstart with far end disconnection supervision). It can detect ringing and

I'm having a problem defining my channels Here is my zapata.conf ----------------------------------------------------------------------------------------------------- ; Zapata telephony interface ; ; Configuration file [channels] ; rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes

Ok. I just got a TDM10B and it is in with my X100P. So as it says in the provided instructions, I used the command modprobe tor2 I get an error message saying that there is no such device. My zaptel.conf looks like this: fxsks=1 fxoks=2 So I load the X100P first. (modprobe wcfxo) Then I load the TDM10B (modprobe tor2) Then I'm told that the device doesn't exist. Please help

Does anybody know a place where I can download a working PWLIB and H323? The files at www3.openh323.org are not in gzip format (according to the error message I receive) gunzip: pwlib_1.4.11.tar.gz: not in gzip format I have also tried using the tar -xzvf command, and that gives the following error: gzip: stdin: not in gzip format tar: Child returned status 1 tar: Error exit delayed from

Ok. I am confused. I now have conflicting answers to my question: Do you need to use a special phone to use SIP? My setup is X100P and TDM10B. I would like to connect to iConnectHere, which uses SIP. Has anybody done this before (using similar equipment to what I have listed above)? And if it is not possible, could somebody please explain why. I don't understand why this wouldn't

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

hello all i'm interested in setting up a small pbx using asterisk and the primary goal is keeping the cost down. the general layout of the net is as folows: * 4 phone lines (2x isdn+ 2x analog) [or 2x isdn + 1x analog, as one might be put aside for a traditional phone/fax with no fancy stuff] * a server box * several client hosts (all linux with x) currently, the isdn lines are unused (to

Here is the situation that I would like to create: Call comes in Receptionist sees that the caller ID is Jenny <8675309> Receptionist picks up phone and transfers call to Batman Batman looks at his phone and sees that the caller ID is Jenny <8675309> I can't seem to figure out how to forward the caller ID. Is this possible with Asterisk?

I am always getting multiple PCI Master Abort messages when I try to plug in a second TDM400P. I have asked this question before, but I nothing really solved my problem and I just put it on the back burner for a while. I am at a point where this is a crucial issue. I have read that the Zaptel devices share an IRQ, is this causing the problem? Is there a way that I can manually change the IRQs of

I have followed the instructions on the asterisk web site to checkout the three files using CVS. I then followed the instructions for make <filename> ; make install in each directory. There seemed to be a lot of error info flashing across the screen during each of the processes. I have verified that I meet the basic requirements linux kernel, openssl, readline with the appropriate devel

Hi guyz I m very much new to Asterisk and i want to establish a PABX for my house at the moment i have X100 card(Configured) Asterisk PABX(Installed) Now i want to know how would i recieve call for e.g. i want during incoming call (after demo mess). if user press 9 (for e.g) the call redirect to host1(for e.g. again).or if ne user of gnophone want to dial outside how would he do so . N e sort

Hello, I've been playing around with * for quite a while now, and have run into a problem that I just cannot seem to figure out. When using * and any IAX client (I have tested with GnoPhone and both clients from iaxclient.sourceforge.net) I have incredibly bad jitter on the connection. What I'm running is a P3-1Ghz machine with 512mb ram for a server. The other end has been

I've been reading all I can in order to try to implement an asterisk setup. In speaking with someone the other day, they advised they thought there was a way to make a SIP or softphone (gnophone) go straight out to the vonage network through asterisk. I already have vonage set up with an ATA 186. What I'm wondering is is there some way that I could direct dial from a softphone

Here's the problem: I start asterisk, and it takes up around 3-4% of my CPU resources. However, this number continues to climb over the hours until it is close to 100%. Usually it takes around a day to climb up to approximately 95 or 96% Has anybody experienced the following problem before?

I am having a really hard time getting gnophone working with asterisk. Gnophone tries to register with my server but there is no response. I can direct incoming calls to gnophone but if gnophone answers them, asterisk does not recognize it. Here is my configuration: iax.conf [jambo] type=user host=dynamic defaultip=136.159.99.100 permit=136.159.99.100 username=jambo secret=fubar

I am trying to run the make command to install Asterisk, but I get the following error: make ... ... checking for tgetent in -ltermcap ... no checking for tgetent in -ltinfo ... no checking for tgetent in -lcurses ... no checking for tgetent in -lncurses ... no configure: error: termcap support not found I am running Mandrake 9.1 on a Pentium II 200MHz. Could this be a hardware issue? I

Hi I would like to use the Asterisk PBX as part of a phone shop system instead of the usual PBX plus PC. How can I do the the billing in a way that is convinient to the phone shop attendant? Regards Shepherd _________________________________________________________________ Add photos to your messages with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail