similar to: IRQ probe failed (0xfffffef8)

the user you are connecting as should have full rights to /var/run/asterisk: http://www.voip-info.org/wiki-Asterisk+non-root hth -----Original Message----- From: Erick Perez [mailto:eaperezh@gmail.com] Sent: Monday, April 03, 2006 9:28 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Unable to connect to remote asterisk (does /var/run/asterisk.ctl

Hi, I have a raid 1 setup where /boot and the rest lies inside the md0 container. /dev/sda1 md0 has /boot /dev/sda2 md0 has swap /dev/sda3 md0 has / SCSI card is an ADAPTEC AIC79xx Grub as the bootloader Centos 4.1 as the OS version Two 70gb SCSI disks The server was working fine. Then a power outage. checked the board,disk,ram,etc. All fine. Now when I try to boot the server does not even reach

doing that grub-install /dev/sda will give me the "corresponding BIOS device" error. But now I fixed it by doing a manual grub install. first boot with cd1 and type linux rescue at the prompt when you're at the linux prompt after detecting and mounting the partitions, do a "chroot /mnt/sysimage" then # grub --batch #grub> root (hd0,0) Filesystem type is ext2fs,

Hi, im using 0.99 stable in RPM form, Im using this for postfix+dovecot+real unix users, now i tried to enable virtual support with this: protocols = imap pop3 ssl_disable = yes log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot.info login_user = dovecot mail_extra_groups = mail auth = default auth_mechanisms = plain auth_passdb = pam auth_userdb = passwd auth_userdb =

Just a question, has anyone knows how to blank or factory reset an AudioCodes MP124-C/FSX/AC/SIP unit (it's a 24 FSX to SIP unit). I purchased them second-handed with no manuals (thank god for the internet!!) but i guess the pdf manual I have does not have the section of factory-reset. Also, any sucess stories with: AudioCodes MP124-C/FSX/AC/SIP

I've been playing for hours with the dovecot.spec file to build --with-mysql. The resulting RPM builds fine but when dovecot runs it does not recognize the passdb mysql statement. I also noted that the spec file has a version of 1.0-stable and rpmbuild complains about an invalid '-' in the version. Being a newbie in rpmbuild, can someone assist me in building for CentOS 4 on i386?

Hello, We use and develop the astGUIclient suite. It is Open-source(as in GPL) and offers Inbound and Outbound call center functions with reports, ACD, monitoring, recording and very basic IVR scripts. Complex IVR functions need to be custom programmed within Asterisk but that is not really that hard. It works across multiple Asterisk servers and we are using it currently at 5 locations including

As stated here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+MeetMe A Meetme room uses Ulaw as the audio codec, so if the other channels use different codecs, then * will transcode. Does the app_conference application works the same way? Or if i have SIP/g729 users and i create a conference with other users also at g729 asterisk will not transcode (when using app_conference)?

Hi, I use putty in my windows xp machine. ssh server in a centos 4. The centos 4 machine runs a web server that listens on port 1812, the centos machine is behind a firewall that allows tcp 22 connections only. I am on public internet. Can I forward/redirect/allow my web browser in windows to "see" the web page in port 1812 of the centos machine via the SSH connection? Thanks, --

A customer is asking for a "manual". He's not talking about a How-To. He's talking about a PDF/DOC that shows what files do what and what parameters can be used and the syntaxis. I think Asterisk Business Edition has one that comes with the box. For the recent *not ABE* stable release will be nice. Comments? -- ------------------------------------------- Erick Perez Linux

Hi, Im compiling dansguardian with the clamav patch, but it needs libesmtp.h and i can't seem to find the rpm for centos or rh4 comments? -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

Hi, where are the kernel sources for x86_64. They are not on the DVD for 4.3 Thanks, -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

Hi, emails to astricon.net seems to bounce (at least for me) I need information about proper & authorized Asterisk training in the Miami, FL area and the possibility of later DCAP testing. Thanks, -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

Where can I find RPMs for RHEL 3? -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama -------------- next part -------------- An HTML attachment was scrubbed... URL: http://dovecot.org/pipermail/dovecot/attachments/20051024/b30a1923/attachment.html

Any C gurus out there that can tell me if this code compiled ok to be used in x86_64 (Pentium Dual Core). It's for the app_conference application. Im using Centos 4.3 x86_64 kernel: 2.6.9-34.ELsmp libgcc-3.4.5-2 gcc-3.4.5-2 after the compilation part is the makefile ************begin compilation******************* [root@centos app_conference]# make clean rm -f *.so *.o app_conference.o

Jerry and Michael, many many thanks for your posts. Erick. On 5/24/06, The VoIP Connection <asterisk-biz@thevoipconnection.com> wrote: > Here are the step by step instructions for setting up a brand new Audiocodes > FXS gateway for use with an Asterisk server: > > Connect the gateway to a network switch and connect a computer to the same > switch. Then configure the IP

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

Hi people, i've seen the wiki looking for a * billing solution but the links point to websites that have not updated their content (or news) section for over a year. Can anyone recommend a commercial-grade (i mean no mom&pop cdr system) billing solution that can start small and then scalate as traffic grows and tested/used with Asterisk before? commercial or open source links are ok.

I just found a Dialogic VFX/41JCT-LS (4 analog ports) in a drawer. I can use it in my house with asterisk at home project. Can I use that with asterisk? Where can I download proper drivers? -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama -------------- next part -------------- An HTML attachment was

Hi, Im trying to register to a SIP provider that told me that they only need to authenticate using IP. the following string generates response 405 register => asteriskIPaddress@SIPproviderIP:5060 doing the following is not alowed by asterisk register => @SIPproviderIP:5060 any ideas? -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/