CentOS - Dec 2005 - MD Raid 1 software device not booting not even reaching grub

Hi, I have a raid 1 setup where /boot and the rest lies inside the md0
container.
/dev/sda1 md0 has /boot
/dev/sda2 md0 has swap
/dev/sda3 md0 has /

SCSI card is an ADAPTEC AIC79xx
Grub as the bootloader
Centos 4.1 as the OS version
Two 70gb SCSI disks

The server was working fine. Then a power outage. checked the
board,disk,ram,etc. All fine.
Now when I try to boot the server does not even reach GRUB (no splash, no menu).

I read a post about maybe the MBR got damaged (no fix posted) and
another post about missing SCSI drivers not being loaded before kernel
boot.

Suggestions?


--

-------------------------------------------
Erick Perez
Linux User 376588
http://counter.li.org/  (Get counted!!!)
Panama, Republic of Panama

Forgot to mention that if I use the rescue mode CD, partitions are
being recognized and I can do a "chroot /mnt/sysimage".
However, no idea where to go from there.


On 12/2/05, Erick Perez <eaperezh at gmail.com>
wrote:
> Hi, I have a raid 1 setup where /boot and the rest lies inside the md0
> container.
> /dev/sda1 md0 has /boot
> /dev/sda2 md0 has swap
> /dev/sda3 md0 has /
>
> SCSI card is an ADAPTEC AIC79xx
> Grub as the bootloader
> Centos 4.1 as the OS version
> Two 70gb SCSI disks
>
> The server was working fine. Then a power outage. checked the
> board,disk,ram,etc. All fine.
> Now when I try to boot the server does not even reach GRUB (no splash, no
menu).
>
> I read a post about maybe the MBR got damaged (no fix posted) and
> another post about missing SCSI drivers not being loaded before kernel
> boot.
>
> Suggestions?
>
>
> --
>
> -------------------------------------------
> Erick Perez
> Linux User 376588
> http://counter.li.org/  (Get counted!!!)
> Panama, Republic of Panama
>

--

-------------------------------------------
Erick Perez
Linux User 376588
http://counter.li.org/  (Get counted!!!)
Panama, Republic of Panama