asterisk users - Sep 2005 - ztcfg problem

Hi all,

I'm installing two HFC pci card (both in TE mode), I don't have problem
when load module, but whrn I give "ztcfg -vv", I see 6 the six
channels
that I configured, then my computer hang and I have to reboot it. (I'm
using a VIA Epia-M 1000 with Via C3 processor)

 

root@test:~# modprobe zaptel

root@test:~# insmod /usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o 

root@test:~# ztcfg -vv

 

Zaptel Configuration

=====================
 

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)

 

Channel map:

 

Channel 01: Individual Clear channel (Default) (Slaves: 01)

Channel 02: Individual Clear channel (Default) (Slaves: 02)

Channel 03: D-channel (Default) (Slaves: 03)

Channel 04: Individual Clear channel (Default) (Slaves: 04)

Channel 05: Individual Clear channel (Default) (Slaves: 05)

Channel 06: D-channel (Default) (Slaves: 06)

 

6 channels configured.

 

Any ideas ?

 

Thanks all

 

Giordano

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050901/011fa0e4/attachment.htm

On Thu, Sep 01, 2005 at 06:47:10PM +0200, Giordano Grandis
wrote:
> Hi all,
> 
> I'm installing two HFC pci card (both in TE mode), I don't have
problem
> when load module, but whrn I give "ztcfg -vv", I see 6 the six
channels
> that I configured, then my computer hang and I have to reboot it. (I'm
> using a VIA Epia-M 1000 with Via C3 processor)
When exactly does it hang?

What is your zapata.conf?

Do you run it from the console? if so: do you see an oops trace?

Is the system totally hung, or can you still get useful information from
alt-sysrq-p and such?
> 
>  
> 
> root@test:~# modprobe zaptel
> 
> root@test:~# insmod /usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o 
And which version of zaptel? And linux?
> 
> root@test:~# ztcfg -vv
> 
>  
> 
> Zaptel Configuration
> 
> =====================> 
>  
> 
> SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> 
> SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> 
>  
> 
> Channel map:
> 
>  
> 
> Channel 01: Individual Clear channel (Default) (Slaves: 01)
> 
> Channel 02: Individual Clear channel (Default) (Slaves: 02)
> 
> Channel 03: D-channel (Default) (Slaves: 03)
> 
> Channel 04: Individual Clear channel (Default) (Slaves: 04)
> 
> Channel 05: Individual Clear channel (Default) (Slaves: 05)
> 
> Channel 06: D-channel (Default) (Slaves: 06)
> 
>  
> 
> 6 channels configured.
>
-- 
Tzafrir Cohen         | tzafrir@jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir@cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend

> 
> From: "Giordano Grandis" <g.grandis@invidea.it>
> Subject: [Asterisk-Users] ztcfg problem
> 
> Hi all,
> 
> I'm installing two HFC pci card (both in TE mode), I don't have
problem
> when load module, but whrn I give "ztcfg -vv", I see 6 the six
channels
> that I configured, then my computer hang and I have to reboot it. (I'm
> using a VIA Epia-M 1000 with Via C3 processor)
> 
> 
> 
> root@test:~# modprobe zaptel
> 
> root@test:~# insmod /usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o
> 
> root@test:~# ztcfg -vv
> 
>  Giordano,
 It looks like you do a insmod of zaphfc.o while I think you have to do a 
insmod/modprobe of the zaphfc.ko Maybe that is causing your problem, if not, 
please supply us with the logging from /var/log/messages and/or other log 
files.
 Regards,
Michel
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050901/bb49dd8a/attachment.htm